GPCC's new land surface precipitation climatology based on quality-controlled in situ data and its role in quantifying the global water cycle

In 1989, the need for reliable gridded land surface precipitation data sets, in view of the large uncertainties in the assessment of the global energy and water cycle, has led to the establishment of the Global Precipitation Climatology Centre (GPCC) at Deutscher Wetterdienst on invitation of the WMO. The GPCC has calculated a precipitation climatology for the global land areas for the target period 1951–2000 by objective analysis of climatological normals of about 67,200 rain gauge stations from its data base. GPCC's new precipitation climatology is compared to several other station-based precipitation climatologies as well as to precipitation climatologies derived from the GPCP V2.2 data set and from ECMWF's model reanalyses ERA-40 and ERA-Interim. Finally, how GPCC's best estimate for terrestrial mean precipitation derived from the precipitation climatology of 786 mm per year (equivalent to a water transport of 117,000 km³) is fitting into the global water cycle context is discussed.     

Evaluating the sensitivity of wetlands to climate change with remote sensing techniques

Wetlands are valuable ecosystems that provide many valuable services, yet many of these important ecosystems are at risk because of current trends in climate change. The Prairie Pothole Region (PPR) in the upper‐midwest of the United States and south‐central Canada, characterized by glacially sculpted landscapes and abundant wetlands, is one such vulnerable region. According to regional/global climate model predictions, drought occurrence will increase in the PPR region through the 21st century and thus will probably cause the amount of water in wetlands to decline. Water surface area (WSA) of Kidder County, ND, from 1984–2011 was measured by classifying TM/ETM+(Landsat Thematic Mapper / Enhanced Thematic Mapper Plus) images through the modified normalized difference water index. We then developed a linear model based on the WSA of these wetlands and historical climate data and used this to determine the wetland sensitivity to climate change and predict future wetlands WSA in the PPR. Our model based on Palmer drought severity index (PDSI) of the current year (PDSI_{t ? 0}) and of the previous two years (PDSI_{t ? 2}) can explain 79% of the annual wetland WSA variance, suggesting a high sensitivity of wetlands to drought/climate change. We also predicted the PPR wetlands WSA in the 21st century under A1B scenario (a mid‐carbon emission scenario) using simulated PDSI based on Intergovernmental Panel on Climate Change AR4 22‐model ensemble climate. According to our prediction, the WSA of the PPR wetlands will decrease to less than half of the baseline WSA (defined as the mean wetlands WSA of the 2000s) by the mid of the 21st century, and to less than one‐third by the 2080s, and will then slightly increase in the 2090s. This considerable future wetland loss caused only by climate change provides important implication to future wetland management and climate adaptation policy. Copyright © 2012 John Wiley & Sons, Ltd.     

Transfer functions simulating the coprecipitation of trace elements in unsaturated soils

Transfer functions describing the coprecipitation of various trace elements (TE; As, Cd, Co, Cu, Cr, Mo, Ni, Pb, Zn), precipitating with iron(oxihydr)oxides from an aqueous solution, were developed and implemented in the computer model ‘Seeper’. ‘Seeper’ was developed to predict the progression of the concentrations of inorganic pollutants in unsaturated soils underneath contaminated areas and to evaluate the prospective contamination of the groundwater. Transfer functions provide a straight and simple relation between the coprecipitation of TE and easy to obtain standard soil parameters, without excessive repercussions on the usability and computation time of the model. Laboratory experiments were conducted to quantify coprecipitation in solutions with pH values ranging from 5 to 12 and containing various iron and TE concentrations. For the examined TE, the transfer functions describe the coprecipitated fraction as a function of the pH value and the concentration ratio between precipitated iron and a TE. The transfer functions yielded a good prediction of cadmium, cobalt, copper, molybdenum, nickel, and zinc (R ² from 0.73 to 0.83). As for arsenic, chromium, and lead the correlation was not as good albeit a significant influence of precipitating iron on the mobility of these elements was observed and represented in the corresponding transfer functions.     

Interpolation using a generalized Green's function for a spherical surface spline in tension

A variety of methods exist for interpolating Cartesian or spherical surface data onto an equidistant lattice in a procedure known as gridding. Methods based on Green's functions are particularly simple to implement. In such methods, the Green's function for the gridding operator is determined and the resulting gridding solution is composed of the superposition of contributions from each data constraint, weighted by the Green's function evaluated for all output–input point separations. The Green's function method allows for considerable flexibility, such as complete freedom in specifying where the solution will be evaluated (it does not have to be on a lattice) and the ability to include both surface heights and surface gradients as data constraints. Green's function solutions for Cartesian data in 1-, 2- and 3-D spaces are well known, as is the dilogarithm solution for minimum curvature spline on a spherical surface. Here, the spherical surface case is extended to include tension and the new generalized Green's function is derived. It is shown that the new function reduces to the dilogarithm solution in the limit of zero tension. Properties of the new function are examined and the new gridding method is implemented in Matlab® and demonstrated on three geophysical data sets.     

Environmental Radioxenon Levels in Europe: a Comprehensive Overview

Activity concentration data from ambient radioxenon measurements in ground level air, which were carried out in Europe in the framework of the International Noble Gas Experiment (INGE) in support of the development and build-up of a radioxenon monitoring network for the Comprehensive Nuclear-Test-Ban Treaty verification regime are presented and discussed. Six measurement stations provided data from 5 years of measurements performed between 2003 and 2008: Longyearbyen (Spitsbergen, Norway), Stockholm (Sweden), Dubna (Russian Federation), Schauinsland Mountain (Germany), Bruyères-le-Châtel and Marseille (both France). The noble gas systems used within the INGE are designed to continuously measure low concentrations of the four radioxenon isotopes which are most relevant for detection of nuclear explosions: ^131mXe, ^133mXe, ¹³³Xe and ¹³⁵Xe with a time resolution less than or equal to 24 h and a minimum detectable concentration of ¹³³Xe less than 1 mBq/m³. This European cluster of six stations is particularly interesting because it is highly influenced by a high density of nuclear power reactors and some radiopharmaceutical production facilities. The activity concentrations at the European INGE stations are studied to characterise the influence of civilian releases, to be able to distinguish them from possible nuclear explosions. It was found that the mean activity concentration of the most frequently detected isotope, ¹³³Xe, was 5–20 mBq/m³ within Central Europe where most nuclear installations are situated (Bruyères-le-Châtel and Schauinsland), 1.4–2.4 mBq/m³ just outside that region (Stockholm, Dubna and Marseille) and 0.2 mBq/m³ in the remote polar station of Spitsbergen. No seasonal trends could be observed from the data. Two interesting events have been examined and their source regions have been identified using atmospheric backtracking methods that deploy Lagrangian particle dispersion modelling and inversion techniques. The results are consistent with known releases of a radiopharmaceutical facility.     

Full‐scale shaking table test of a base‐isolated medical facility subjected to vertical motions

Base isolation is a well known technology that has been proven to reduce structural response to horizontal ground accelerations. However, vertical response still remains a topic of concern for base‐isolated buildings, perhaps more so than in fixed‐base buildings as isolation is often used when high performance is required. To investigate the effects of vertical response on building contents and nonstructural components, a series of full‐scale shaking table tests were conducted at the E‐Defense facility in Japan. A four‐story base‐isolated reinforced concrete building was outfitted as a medical facility with a wide variety of contents, and the behavior of the contents was observed. The rubber base isolation system was found to significantly amplify vertical accelerations in some cases. However, the damage caused by the vertical ground motions was not detrimental when peak vertical floor accelerations remained below 2 g with three exceptions: (1) small items placed on shelves slid or toppled; (2) objects jumped when placed on nonrigid furniture, which tended to increase the response; and (3) equipment with vertical eccentricities rocked and jumped. In these tests, all equipment and nonstructural components remained functional after shaking. Copyright © 2013 John Wiley & Sons, Ltd.     

Analyses of pre-injection reservoir data for stable carbon isotope trend predictions in CO2 monitoring: preparing for CO2 injection

Baseline monitoring at the proposed enhanced gas recovery site in Altmark (Germany) was carried out in combination with theoretical and laboratory investigations to describe and predict the principles of expected stable carbon isotope and dissolved inorganic carbon (DIC) trends during CO₂ injection in reservoirs. This provides fundamental data for site-specific characterisation for monitoring purposes. Baseline ??¹³C values at the Altmark site ranged between ?1.8 and ?11.5??? and DIC values were about 2?mmol?L^?1. These baseline values form the basis for a theoretical study on the influences of the ambient reservoir conditions on the state of geochemical and isotope equilibrium of the reservoir fluids. Transferring this theoretical study to the Altmark site enables predictions on geochemical trends during potential injection. Assuming that CO₂ would be injected at the Altmark site to pCO₂?=?100?bar and with a ??¹³C of ?30???, at isotopic and geochemical equilibrium, ??¹³C_DIC values would approach this end-member, and DIC concentrations of 1,000?mmol L^?1 would be expected. Laboratory experiments were conducted at low pCO₂ levels (4?C35?bars) to mimic the approach of a CO₂ plume at a monitoring well. These results support field investigations from other sites: that ??¹³C_DIC is a sensitive tool for monitoring CO₂ migration in the subsurface and simultaneously allows quantification of geochemical trapping of CO₂.     

Sulfide Oxidation across Diffuse Flow Zones of Hydrothermal Vents

The sulfide (H₂S/HS^?) that is emitted from hydrothermal vents begins to oxidize abiotically with oxygen upon contact with ambient bottom water, but the reaction kinetics are slow. Here, using in situ voltammetry, we report detection of the intermediate sulfur oxidation products polysulfides [ $ {\text{S}}_{\text{x}}^{2 - } $ ] and thiosulfate [ $ {\text{S}}_{ 2} {\text{O}}_{ 3}^{ 2- } $ ], along with contextual data on sulfide, oxygen, and temperature. At Lau Basin in 2006, thiosulfate was identified in less than one percent of approximately 10,500 scans and no polysulfides were detected. Only five percent of 11,000 voltammetric scans taken at four vent sites at Lau Basin in May 2009 show either thiosulfate or polysulfides. These in situ data indicate that abiotic sulfide oxidation does not readily occur as H₂S contacts oxic bottom waters. Calculated abiotic potential sulfide oxidation rates are <10^?3 ??M/min and are consistent with slow oxidation and the observed lack of sulfur oxidation intermediates. It is known that the thermodynamics for the first electron transfer step for sulfide and oxygen during sulfide oxidation in these systems are unfavorable, and that the kinetics for two electron transfers are not rapid. Here, we suggest that different metal catalyzed and/or biotic reaction pathways can readily produce sulfur oxidation intermediates. Via shipboard high-pressure incubation experiments, we show that snails with chemosynthetic endosymbionts do release polysulfides and may be responsible for our field observations of polysulfides.     

A brief review of Agenian rhinocerotids in Western Europe

The Agenian is the earliest Neogene European Land Mammal Age. It encompasses the mammalian zones MN1 (23.03–22.7 Ma) and MN2 (22.7–20.0 Ma) and roughly coincides with the Aquitanian standard age. Agenian mammalian assemblages from Western Europe encompass a mixture of rhinocerotid taxa of Oligocene affinities and of Miocene newcomers, mostly recorded in France, Germany, Switzerland, and to a lesser extent, Spain. Rhinocerotidae are documented by seven species referred to five genera (Pleuroceros pleuroceros, Protaceratherium minutum, Plesiaceratherium aquitanicum, Mesaceratherium paulhiacense, Diaceratherium lemanense, D. asphaltense, and D. aginense), further attesting to a low suprageneric diversity. Their systematics, morphology, ecology, stratigraphical and geographical ranges are detailed in the present article. Occurrences and geographical ranges of all seven rhinocerotid species are illustrated on palaeogeographical maps of the circum-Mediterranean region at 23 Ma (MN1) and 21 Ma (MN2). The richest Agenian localities (Paulhiac, MN1; Laugnac, MN2) record a specific diversity similar to that of Orleanian rhinocerotid assemblages, with up to five/six associated species. All Agenian rhinocerotid species from Western Europe are endemic to the concerned region, which is consistent with the complete geographic isolation of Western Europe by earliest Miocene times. However, all five genera are documented by twin species in coeval localities of South and Central Asia, which implies (1) vicariant speciation events by latest Oligocene times and (2) the existence of intermittent pathways for terrestrial megamammals such as rhinocerotids during the concerned interval.