Crystallization temperature determination of Itokawa particles by plagioclase thermometry with X‐ray diffraction data obtained by a high‐resolution synchrotron Gandolfi camera

The crystallization temperatures of Itokawa surface particles recovered by the space probe Hayabusa were estimated by a plagioclase geothermometer using sodic plagioclase triclinicity. The Δ131‐index required for the thermometer, which is the difference in X‐ray diffraction peak positions between the 131 and 11 reflections of plagioclase, was obtained by a high‐resolution synchrotron Gandolfi camera developed for the third generation synchrotron radiation beamline, BL15XU at SPring‐8. Crystallization temperatures were successfully determined from the Δ131‐indices for four particles. The observed plagioclase crystallization temperatures were in a range from 655 to 660 °C. The temperatures indicate crystallization temperatures of plagioclases in the process of prograde metamorphism before the peak metamorphic stage.     

Estimating of gas transfer velocity using triple isotopes of dissolved oxygen

The atmosphere-ocean exchange of climatically important gases is determined by the transfer velocity (k) and concentration gradient across the interface. Based on observations in the northwestern subarctic Pacific and Sagami Bay, we report here the results of the first ever application of the natural abundance of triple isotopes of dissolved oxygen (¹⁶O, ¹⁷O and ¹⁸O) for direct estimation of k and propose a new relationship with wind speed. The k values estimated from nighttime variations in oxygen isotopes are found to be higher than the direct estimations at low wind speed (<5 m s⁻¹) and lower at high wind speeds (>13 m s⁻¹) and showed significant spatial variability. The method presented here can be used to derive seasonal and spatial variations in k and the influence of surface conditions on the value, leading to improved estimates of biogenic/anthropogenic gas exchange at the air-sea interface.     

Curation protocol of Phobos sample returned by Martian Moons eXploration

Japan Aerospace Exploration Agency's Martian Moons eXploration (MMX) mission will launch a spacecraft in 2024 to return samples from Phobos in 2029. Curatorial work for the returned Phobos samples is critical for the sample allocation without degrading the sample integrity and subsequent sample analysis that will provide new constraints on the origin of Phobos and the evolution of the circum-Mars environment. The Sample Analysis Working Team of the MMX is designing the sample curation protocol. The curation protocol consists of three phases: (1) quick analysis (extraction and mass spectrometry for gases), (2) pre-basic characterization (bulk-scale observation), and (3) basic characterization (grain-by-grain observation and allocation of the sample aliquots). Nondestructive analyses within the clean chamber (e.g., visible and near-infrared spectral imaging) and outside the chamber (e.g., gas mass spectrometry) are incorporated into the curation flow in coordination with the MMX mission instrument teams for ground-truthing the remote-sensing data sets. The MMX curation/sample analysis flow enables the seamless integration between the sample and remote-sensing data sets to maximize the scientific value of the collected Phobos samples.     

The effect of a tidal cycle on the dynamics of nutrients in a tidal estuary in the Seto Inland Sea, Japan

A 24 hour time series survey was carried out during a spring tide (tidal range ca.2 m) of May 1995 on a tidal estuary in the Seto Inland Sea, Japan, in the context of an integrated program planned to quantify the dynamics of biophilic elements (carbon, nitrogen and phosphorus) and the roles played by the macrobenthos on the processes. Three stations were set along a transect line of about 1.4 km, which linked the river to the rear to the innermost part of the subtidal zone. Every hour, at each station, measurements were made of surface water temperature, salinity and dissolved oxygen concentration, and surface water was collected for the determination of nutrients [NH₄ ⁺−N, (NO₃ ⁻+NO₂ ⁻)−N, PO₄ ³⁻−P and Si (OH)₄−Si]. During the ebb flow, riverine input of silicate and nitrate+nitrite significantly increased the concentrations of both the intertidal and the subtidal stations. Conversely, during the high tide, river nutrient concentrations were lowered by the mixing of fresh water with sea water. As a result, best (inverse) correlations were found at the river station for salinity against silicate (y=-2.9 Sal.+110.7,r ²=0.879) and nitrate+nitrite (y=-1.3 Sal.+48.4,r ²=0.796). In contrast, ammonium nitrogen concentrations were higher at intermediate salinities. Indeed, no significant correlation was found between salinity and ammonium. The effect of the macrobenthos, which is abundant on the intertidal flat, is discussed as a biological component that influences the processes of nutrient regeneration within the estuary. The effect of the tidal amplitude is an important one in determining the extent of the variations in nutrient concentrations at all three stations, which were stronger between the lower low tide and the higher high tide.     

Tectonic evolution along the northernmost border of the Philippine Sea plate since about 1 Ma

Recent structural, tephrochronologic and magnetostratigraphic studies conducted along the northernmost border of the Philippine Sea (PHS) plate enable us to reconstruct the precise tectonic evolution along the convergent boundary between the PHS plate and the Northeast Japan (NEJ) plate or the North American (NAM) plate since about 1 Ma. The authors of the present study split the tectonic evolution into five stages and present the characteristics of each stage. A plate tectonic interpretation is proposed, based upon the tectonic evolution, with special reference to the mode of convergent motion. In brief, our interpretations are as follows: the relative motion between the PHS and the NEJ plates was not recognized geologically within the area studied from about 1.0 to 0.9 Ma (Stage 1), suggesting either none or small influence from the coupling between the two plates during that period of time. Convergence between the PHS and the NEJ plates was possibly in N-S direction from 0.9 to 0.5 Ma (Stage II), and probably north-northwestward since 0.5 Ma (Stages III to V). The mode of the convergent motion was that of buoyant subduction in Stages II and III. The mode changed gradually from buoyant subduction during Stage IV to collision in Stage V (0.07 Ma to the present).     

Crustal structure beneath Aso Caldera,Southwest Japan,as derived from receiver function analysis

Aso Volcano experienced a huge pyroclastic eruption 90 thousand years ago, and formed a large caldera (18 km × 25 km). In order to test the hypothesis of a magma body in the mid and lower crust that has been suggested geophysically and geochemically, we investigated seismic velocity discontinuities and velocity structure beneath Aso Caldera using receiver functions and a genetic algorithm inversion. We confirm the existence of the Moho at depths between 30 km and 35 km and a large velocity anomaly should exist in the deep portion of the crust beneath Aso Caldera, from imaging of receiver functions observed only at stations outside the caldera. As a result of a more detailed examination with GA inversion, a low velocity layer is detected at depths between 10 km and 24 km beneath the western part of the caldera. S-wave velocity of the layer is estimated to be 2.0–2.4 km/s. We estimate that the low velocity layer contains at most 15% melt or 30% aqueous fluid. The layer exists near the Conrad and at the same depths as the swarm of the low frequency earthquakes and a compressional and dilatational deformation source which are expected to be caused by fluid movement beneath the middle-eastern part of the caldera. Fluid contained in the layer might be related with huge pyroclastic eruptions of Aso Volcano.     

Fluid inclusion and stable isotope (O, H, C, and S) constraints on the genesis of the Serrinha gold deposit, Gurupi Belt, northern Brazil

The Serrinha gold deposit of the Gurupi Belt, northern Brazil, belongs to the class of orogenic gold deposits. The deposit is hosted in highly strained graphitic schist belonging to a Paleoproterozoic (∼2,160 Ma) metavolcano-sedimentary sequence. The ore-zones are up to 11 m thick, parallel to the regional NW–SE schistosity, and characterized by quartz-carbonate-sulfide veinlets and minor disseminations. Textural and structural data indicate that mineralization was syn- to late-tectonic and postmetamorphic. Fluid inclusion studies identified early CO₂ (CH₄-N₂) and CO₂ (CH₄-N₂)-H₂O-NaCl inclusions that show highly variable phase ratios, CO₂ homogenization, and total homogenization temperatures both to liquid and vapor, interpreted as the product of fluid immiscibility under fluctuating pressure conditions, more or less associated with postentrapment modifications. The ore-bearing fluid typically has 18–33mol% of CO₂, up to 4mol% of N₂, and less than 2mol% of CH₄ and displays moderate to high densities with salinity around 4.5wt% NaCl equiv. Mineralization occurred around 310 to 335°C and 1.3 to 3.0 kbar, based on fluid inclusion homogenization temperatures and oxygen isotope thermometry with estimated oxygen fugacity indicating relatively reduced conditions. Stable isotope data on quartz, carbonate, and fluid inclusions suggest that veins formed from fluids with δ¹⁸O_H2O and δD_H2O (310–335°C) values of +6.2 to +8.4‰ and −19 to −80‰, respectively, which might be metamorphic and/or magmatic and/or mantle-derived. The carbon isotope composition (δ¹³C) varies from −14.2 to −15.7‰ in carbonates; it is −17.6‰ in fluid inclusion CO₂ and −23.6‰ in graphite from the host rock. The δ³⁴S values of pyrite are −2.6 to −7.9‰. The strongly to moderately negative carbon isotope composition of the carbonates and inclusion fluid CO₂ reflects variable contribution of organic carbon to an originally heavier fluid (magmatic, metamorphic, or mantle-derived) at the site of deposition and sulfur isotopes indicate some oxidation of the originally reduced fluid. The deposition of gold is interpreted to have occurred mainly in response to phase separation and fluid-rock interactions such as CO₂ removal and desulfidation reactions that provoked variations in the fluid pH and redox conditions.     

Mantle peridotites from the Western Pacific

We review petrographical and petrological characteristics of mantle peridotite xenoliths from the Western Pacific to construct a petrologic model of the lithospheric mantle beneath the convergent plate boundary. The peridotite varies from highly depleted spinel harzburgite of low-pressure origin at the volcanic front of active arcs (Avacha of Kamchatka arc and Iraya of Luzon–Taiwan arc) to fertile spinel lherzolite of high-pressure origin at the Eurasian continental margin (from Sikhote-Alin through Korea to eastern China) through intermediate lherzolite–harzburgite at backarc side of Japan island arcs. Oxygen fugacity recorded by the peridotite xenoliths decreases from the frontal side of arc to the continental margin. The sub-arc type peridotite is expected to exist beneath the continental margin if accretion of island arc is one of the important processes for continental growth. Its absence suggests replacement by the continental lherzolite at the region of backarc to continental margin. Asthenospheric upwelling beneath the continental region, which has frequently occurred at the Western Pacific, has replaced depleted sub-cratonic peridotite with the fertile spinel lherzolite. Some of these mantle diapirs had opened backarc basins and strongly modified the lithospheric upper mantle by metasomatism and formation of Group II pyroxenites.