Three‐dimensional VS profiling using microtremors in Kushiro,Japan

A practical method is presented for determining three‐dimensional S‐wave velocity (V_S) profile from microtremor measurements. Frequency–wave number (f–k) spectral analyses of microtremor array records are combined, for this purpose, with microtremor horizontal‐to‐vertical (H/V) spectral ratio techniques. To demonstrate the effectiveness of the proposed method, microtremor measurements using arrays of sensors were conducted at six sites in the city of Kushiro, Japan. The spectral analyses of the array records yield dispersion characteristics of Rayleigh waves and H/V spectra of surface waves, and joint inversion of these data results in V_S profiles down to bedrock at the sites. Conventional microtremor measurements were performed at 230 stations within Kushiro city, resulting in the H/V spectra within the city. Three‐dimensional V_S structure is then estimated from inversion of the H/V spectra with the V_S values determined from the microtremor array data. This reveals three‐dimensional V_S profile of Kushiro city, together with an unknown hidden valley that crosses the central part of the city. The estimated V_S profile is consistent with available velocity logs and results of subsequent borings, indicating the effectiveness of the proposed method. Copyright © 2008 John Wiley & Sons, Ltd.     

Rain‐induced deep‐seated catastrophic rockslides controlled by a thrust fault and river incision in an accretionary complex in the Shimanto Belt,Japan

To clarify the geological causes of rockslides induced by rainstorms in accretionary complexes, the geology and geomorphology of two large rockslides (volumes > 10⁶ m³) induced by the heavy rainfall of Typhoon Talas in the Shimanto Belt, Kii Mountains, Japan in 2011 are investigated. Our analysis reveals that thrusts with brittle crush zones controlled the occurrence of the rockslides. The properties and distribution of thrusts were poorly constrained before this study. Flooding during the rainstorm removed surface materials along rivers, allowing thorough geological mapping to be performed. Gravitationally deformed slopes were studied using GIS analysis of 1 m digital elevation models (DEMs) and fieldwork, and X‐ray diffraction (XRD) analysis, permeability, and direct shear tests were used to characterize the mineralogy and geotechnical properties of fault gouge. The Kawarabi thrust has a brittle crush zone up to 6 m thick and acts as the sliding surface for both landslides. The thrust dips 34° downslope and is cut by high‐angle faults and joints along one or both sides of each landslide body. Prior to failure, the upper part of the slope contained small scarps, suggesting that the slopes were already gravitationally deformed. The slope instability can be attributed to long‐term river erosion, which has undercut the slope and exposed the thrust at the base of the slope. The groundwater level, monitored in boreholes, suggests that the Kawarabi thrust is a barrier to groundwater flow. The weak and impermeable nature of the thrust played an essential role in the generation of gravitational slope deformation and catastrophic failure during periods of increased rainfall. Thrusts are a common feature of accretionary complexes, including in the Shimanto Belt, and the mechanism of slope failure stated above can be typical of rockslides in accretionary complexes and provide new insights into landslide disaster mitigation.     

Mantle peridotites from the Western Pacific

We review petrographical and petrological characteristics of mantle peridotite xenoliths from the Western Pacific to construct a petrologic model of the lithospheric mantle beneath the convergent plate boundary. The peridotite varies from highly depleted spinel harzburgite of low-pressure origin at the volcanic front of active arcs (Avacha of Kamchatka arc and Iraya of Luzon–Taiwan arc) to fertile spinel lherzolite of high-pressure origin at the Eurasian continental margin (from Sikhote-Alin through Korea to eastern China) through intermediate lherzolite–harzburgite at backarc side of Japan island arcs. Oxygen fugacity recorded by the peridotite xenoliths decreases from the frontal side of arc to the continental margin. The sub-arc type peridotite is expected to exist beneath the continental margin if accretion of island arc is one of the important processes for continental growth. Its absence suggests replacement by the continental lherzolite at the region of backarc to continental margin. Asthenospheric upwelling beneath the continental region, which has frequently occurred at the Western Pacific, has replaced depleted sub-cratonic peridotite with the fertile spinel lherzolite. Some of these mantle diapirs had opened backarc basins and strongly modified the lithospheric upper mantle by metasomatism and formation of Group II pyroxenites.     

Podiform chromitite in the arc mantle: chromitite xenoliths from the Takashima alkali basalt,Southwest Japan arc

Chromitite xenoliths from the Takashima alkali basalt in the Southwest Japan arc are classified into two types: Type 1 chromitite in thin layers in dunite or wehrlite xenoliths; and Type 2 chromitite in discrete xenoliths which has an orbicular texture, previously documented only from podiform chromitites in ophiolites. Type 1 may be equivalent to layered chromitites in ophiolitic cumulates and Type 2 to podiform chromitites in the transition zone of ophiolites. This example of podiform chromitite from the Southwest Japan arc suggest that these podiform chromitites may exist in the upper mantle beneath an arc, where their formation is favored.     

A new type of orthopyroxenite xenolith from Takashima, Southwest Japan: silica enrichment of the mantle by evolved alkali basalt

We found fine-grained Fe-rich orthopyroxene-rich xenoliths (mainly orthopyroxenite) containing partially digested dunite fragments of Group I from Takashima, Southwest Japan. Orthopyroxenite veinlets, some of which contain plagioclase at the center, also replace olivine in dunite and wehrlite xenoliths of Group I. This shows high reactivity with respect to olivine of the melt involved in orthopyroxenite formation, indicating its high SiO₂ activity. The secondary orthopyroxene of this type is characterized by low Mg# [= Mg/(Mg + total Fe) atomic ratio] (down to 0.73) and high Al₂O₃ contents (5–6 wt%). It is different in chemistry from other secondary orthopyroxenes found in peridotite xenoliths derived from the mantle wedge. Clinopyroxenes in the Fe-rich orthopyroxenite show a convex-upward REE pattern with a crest around Sm. This pattern is strikingly similar to that of clinopyroxenes of Group II pyroxenite xenoliths and of phenocrystal and xenocrystal clinopyroxenes, indicating involvement of similar alkali basaltic melts. The Fe-rich orthopyroxenite xenoliths from Takashima formed by reaction between evolved alkali basalt melt and mantle olivine; alkali basalt initially slightly undersaturated in silica might have evolved to silica-oversaturated compositions by fractional crystallization at high-pressure conditions. The Fe-rich orthopyroxenites occur as dikes within the uppermost mantle composed of dunite and wehrlite overlying pockets of Group II pyroxenites. The orthopyroxene-rich pyroxenites of this type are possibly common in the uppermost mantle beneath continental rift zones where alkali basalt magmas have been prevalent.     

Trace metals in Japanese eel Anguilla japonica in relation to ecological migratory types and growth stages

In order to understand the metal concentrations in Japanese eel Anguilla japonica, nine elements were analyzed in the livers of different migratory types of eels collected from Tokushima region (south Japan). Migratory types were defined by examining the Sr:Ca ratio in otoliths. The results showed that there were significant differences in V, Cr, Cd, and Pb concentrations among the migratory types. Mature-sea-eels show a higher risk of metal accumulation than other migratory types of eels, and the concentrations of Mn, Cu, and Zn in mature eels were significantly higher than those in immature eels. The study suggests that the eel liver is a valuable bioindicator for trace metals; however, when using the eel as a bioindicator to reveal the pollutants in aquatic systems, life history analysis should be carried out for accurate interpretation of the results.     

Correction of the effect of relative wind direction on wind speed derived by advanced microwave scanning radiometer

The sea surface wind speed (SSWS) derived by a microwave radiometer can be contaminated by changes of the brightness temperature owing to the angle between the sensor azimuth and the wind direction (Relative Wind Direction effect: RWD effect). We attempt to apply the method proposed by Konda and Shibata (2004) to the SSWS derived by Advanced Microwave Scanning Radiometer (AMSR) on Advanced Earth Observing Satellite II (ADEOS-II), in order to correct for the RWD effect. The improvement of accuracy of the SSWS estimation amounts to roughly 60% of the error caused by the RWD effect. Comparison with in situ observation at the Tropical Atmosphere Ocean (TAO) array shows that the root mean square error of the corrected SSWS is 1.1 ms⁻¹. It is found that the impact of the RWD effect on the estimation of the latent heat flux can amount to about 30 Wm⁻² on average. We applied the method to the SSWS derived by AMSR for Earth Observing System (AMSR-E) and obtained a similar result.     

Clockwise 180° rotation of slip direction in a superficial nappe pile emplaced upon a high-P/T type metamorphic terrane in central Japan

Understanding the exhumation process of deep-seated material within subduction zones is important in comprehending the tectonic evolution of active margins. The deformation and slip history of superficial nappe pile emplaced upon high-P/T type metamorphic rocks can reveal the intimate relationship between deformation and transitions in paleo-stress that most likely arose from changes in the direction of plate convergence and exhumation of the metamorphic terrane. The Kinshozan–Atokura nappe pile emplaced upon the high-P/T type Sanbagawa (= Sambagawa) metamorphic rocks is the remnant of a pre-existing terrane located between paired metamorphic terranes along the Median Tectonic Line (MTL) of central Japan. Intra- and inter-nappe structures record the state of paleo-stress during metamorphism and exhumation of the Sanbagawa terrane. The following tectonic evolution of the nappes is inferred from a combined structural analysis of the basal fault of the nappes and their internal structures. The relative slip direction along the hanging wall rotated clockwise by 180°, from S to N, in association with a series of major tectonic changes from MTL-normal contraction to MTL-parallel strike-slip and finally MTL-normal extension. This clockwise rotation of the slip direction can be attributed to changes in the plate-induced regional stress state and associated exhumation of the deep-seated Sanbagawa terrane from the Late Cretaceous (Coniacian) to the Middle Miocene.