Radiolarian‐based study on the fabric and the formation process of the Early Cretaceous mélange near Zhongba,Yarlung–Tsangpo Suture Zone,southern Tibet

The Yarlung–Tsangpo Suture Zone (YTSZ), as the southernmost and youngest among the sutures that subdivides the Tibetan Plateau into several east–west trending blocks, marks where the Neo‐Tethys was consumed as the Indian continent moved northward and collided against the Eurasian continent. Mélanges in the YTSZ represent the remnants of the oceanic plate through subduction and collision. Mélanges are characterized by a highly sheared volcanoclastic or siliceous mudstone matrix including blocks of chert, claystone, and basalt. Detailed radiolarian analyses are conducted on the mélange near Zhongba County. Macroscopic, mesoscopic, and microscopic observations are combined in order to elucidate the relationships among age, lithology, and structure of blocks in the mélange. Reconstructed ocean plate stratigraphy includes Lower Jurassic limestone within the chert sequence accumulated at a depth near the CCD (Unit 2), Upper Jurassic thin‐bedded chert interbedded with claystone deposited in the wide ocean basin (Unit 3), and Lower Cretaceous chert with siliceous mudstone (Units 4 and 5), representing the middle parts of ocean plate stratigraphy. The results highlight the fabric of brecciated chert on mesoscopic scale, which is thought to be due to localized overpressure. The formation of mesoscopic and microscopic block‐in‐matrix fabrics in the mélange is proposed for the chert and siliceous mudstone bearing different extents of consolidation and competence during the progressive deformation of accreted sediments at shallow‐level subduction.     

Seasonal dynamics influencing coastal primary production and phytoplankton communities along the southern Myanmar coast

Myanmar is tenth among the world’s fish-producing countries and third in ASEAN (Association of Southeast Asian Nations). To understand the mechanisms underlying the high production, oceanographic and phytoplankton surveys, including primary productivity measurements based on pulse amplitude modulation fluorometry, were conducted near an active fishing ground near Myeik City. Three surveys, one in each of the representative seasons and covering the characteristic coastal environments, showed well-defined seasonality in primary production and phytoplankton occurrence. End of the dry season was the most productive, with productivity of 2.59 ± 1.56 g C m^?2 day^?1 and high concentration of chlorophyll a (3.14 ± 2.64 µg L^?1). In this season, the phytoplankton population was dominated by high densities of the diatoms Bellerochea horologicalis and Chaetoceros curvisetus, whereas primary productivity was low at the onset of the dry season, 1.36 ± 0.77 g C m^?2 day^?1. However, this low primary production might be compensated by activation of microbial food chains originating from high dissolved organic carbon. The rainy season exhibited the lowest production, 6.6% of the end of the dry season, due to the extensive discharge of turbid water from the rivers which lowered euphotic layer depth and resulted in an unusually high diffuse attenuation coefficient of 2.30 ± 1.03 m^?1. This incident of turbid water may be related to soil erosion from deforestation and mangrove deterioration. This research reveals the seasonal trend in Myanmar’s coastal productivity and its relationship to the tropical monsoon climate as well as emphasizing the importance of tropical coastal environments to the sustainability of the fisheries.     

Climate and material controls on periglacial soil processes: Toward improving periglacial climate indicators

One of the distinguished efforts of A.L. Washburn was to reconstruct mean annual air temperature using periglacial features as climate indicators. This paper reviews existing periglacial indicators and proposes a strategy to improve their thermal resolution based on recent periglacial process studies, with a focus on solifluction and thermal contraction cracking and associated landforms/structures. Landforms resulting from solifluction reflect both the depth subjected to freeze-thaw and the thickness of frost-susceptible soils. The thickness of a solifluction structure can be used to infer the dominant freeze-thaw regime and minimum seasonal frost depth. Ice-wedge pseudomorphs have limited potential as a climate indicator because (1) they mainly reflect extreme winter temperatures, (2) their thermal thresholds depend on the host material, and (3) they need to be distinguished from frost wedges of other origin produced under different thermal and/or material conditions. Monitoring studies of currently active ice wedges suggest that ice-wedge cracking requires a combination of low temperature and large temperature gradients in the frozen active layer. Further field monitoring of periglacial processes and their controlling factors under various climate conditions and in various materials are needed, however, to improve the resolution of periglacial paleoclimate indicators.     

Simulation of the Collection of Catch Crops for the Recovery of Agricultural Resources using Geographic and Statistical Data

The cultivation of catch crops has great potential in agricultural areas for the recovery of nutrients, mitigation of groundwater contamination, and secondary utilization of harvestry. To estimate the potential volume of catch crops that can be collected at prospective locations, we simulated the cultivation and collection process at a regional scale using geographic and statistical data. Three types of geographic data, namely the locations of greenhouses, collecting stations and road networks, were used in a geographic information system to compute the volume of collected catch crops and carrying distance between greenhouses and collecting stations. Carbon emission from transportation of the catch crop was calculated using an improved ton‐km method, and the results were compared with the carbon content of the catch crop to evaluate the carbon balance. We found that the total fresh weight of the collected catch crops was 67900 t, of which 70% was collected at the top 15 of 73 stations. Carbon emissions from transportation ranged from >1 to 12% of the carbon content of the catch crop. The analytical method used in this study can readily be applied to other environmental studies concerning the collection of agricultural products and other biomass resources.     

Age determination of marine sediments in the western North Pacific by as partic acid chronology

The ages of fossil planktonic foraminifera,Pulleniatina obliquiloculata, in sediments (core 3bPC) from the western North Pacific were determined by aspartic acid chronology, which uses the racemization reaction rate constant of aspartic acid (k_Asp). Aspartic acid racemization-based ages (Asp ages) ranged from 7,600 yrBP at the surface, to 307,000 yrBP at a depth of 352.9 cm in the sediments. This sediment core was also dated by the glacial-interglacial fluctuation of δ¹⁸O chronology, and the ages determined by both chronologies were compared. The ages derived from aspartic acid chronology and δ¹⁸O stratigraphy were more or less consistent, but there appeared to be some differences in age estimates between these two dating methods at some depths within the core. In the core top sediments, the likely cause for the age discrepancy could be the loss of the surface sediment during sampling of the core. At depths of 66.3 and 139 cm within the core, Asp ages indicated reduced sedimentation rates duringca. 60,000-80,000 yrBP andca. 140,000–190,000 yrBP. The maximum age differences in both chronologies are 33,000 yr and 46,600 yr during each of these periods. These anomalous reductions in sedimentation rates occurring during these periods could possibly be related to some geological events, such as an increased dissolution effect of the calcium carbonate in the western North Pacific. Another possible reason for these age differences could be the unreliability in δ¹⁸O ages of core 3bPC as they were estimated by δ¹⁸O ages of another core, 3aPC.     

Simple monitoring method for precaution of landslides watching tilting and water contents on slopes surface

A low-cost and simple monitoring method for early warning of landslides is proposed. To detect abnormal deformation of a slope, this method employs a tilt sensor in place of an extensometer on the slope surface. In order to examine the relevance of measuring rotation angle on a slope surface by tilt sensor, model tests were conducted, and rotation on the slope surface was observed together with slide displacement along the surface. The rotation data responded 30 min before failure in a model test, which could be useful as a signal for early warning. However, the behavior of rotation before failure varies from case to case, and thus, criteria to issue warning should be defined more carefully. For a model slope made of uniform loose sand, measurement of slide displacement along the slope surface is sensitive to failure at the toe, while the measurement of rotation on the slope surface is useful to detect the development of progressive failure upward along the slope. Wireless sensor units with microelectromechanical systems (MEMS) tilt sensor and volumetric water content sensor were also examined on a real slope in Kobe City, and a long-term monitoring was attempted. A simple but possible way to define the criteria of judgment to issue warning can be proposed based on combination of data obtained by the tilt sensors and volumetric water content sensors.     

Nikubuchi peridotite body in the sanbagawa metamorphic belt; thermal history of the ‘Al-pyroxene-rich suite’ peridotite body in high pressure metamorphic terrain

Oceanic tholeiite glass has been reacted with natural seawater at 25°–500° C, 1 kbar, with both low (5) and high (50) water/rock mass ratios. Initial experiments were conducted at constant temperatures between 100° C and 500° C (100° intervals) in order to characterize the mineralogy and chemical exchange trends for both water/rock ratios. However, the primary purpose of this investigation was to study the chemical and mineralogical changes that may take place as reacted seawater cools as it traverses a temperature gradient before exiting onto the seafloor, as may happen in some submarine hydrothermal systems. Consequently, a series of cooling or temperature gradient experiments were performed in which seawater that had reacted with basalt at 500° C was cooled to 25° C in a step-wise fashion; mineralogy and fluid chemistry were determined at 100 degree intervals during cooling.For all of the experiments, the elemental exchange trends were the same. With respect to the initial sea-water, Fe, Mn, Ca, Si and H⁺ increased while Na and Mg decreased. However, the extent of the exchange depended heavily on the temperature and water/rock ratio. During cooling, fluid compositions in the temperature gradient runs generally approached those of the constant temperature experiments. Even though fluid compositions were very similar at 500° C for both water/rock ratios, the high water/rock ratio systems were more efficient in leaching transition metals from the rock and maintained substantial concentrations in solution during cooling, even to temperatures as low as 25° C. The Fe/Mn ratio in the fluid, however, was quite different for the two water/rock ratios; consequently, the effective water/rock ratio appears to be one parameter that can control the Fe/Mn ratio in exiting hydrothermal fluids and may influence the Fe/Mn ratio in metal-rich sediments.Alteration minerals produced in these seawater/ basalt experiments are very similar to those found at submarine springs on the East Pacific Rise, 21° N. Iron sulfides, pyrite and pyrrhotite, precipitated during cooling for both water/rock ratios, demonstrating the ore-forming potential of submarine hydrothermal systems.