Comparison of Near Coastal Significant Wave Height Measurements from SARAL/AltiKa with Wave Rider Buoys in the Indian Region

Significant Wave Height (SWH) measurement data from the AltiKa Radar Altimeter (RA) for the first 13 cycles of satellite coverage are compared with the SWH from Wave Rider Buoys (WRB) located at nine stations along the Indian coast to assess the performance of the altimeter over the coastal region. AltiKa SWH observations within a 30-minute interval and 50 km distance from WRBs are found to be over estimated by 6%, the Root Mean Square Error (RMSE) is 0.36 m, the Scatter Index (SI) is 26%, and the correlation coefficient (r) is 0.91. Relaxing the distance criteria by 50 km leads to increase in RMSE and deterioration of r to 0.89. There is a marked difference in the statistics on the comparison pairs pooled separately for the buoys near west and east coasts, with the latter showing RMSE error 26% more than the former. The method of Cressman weights adopted to correct for the errors arising out of the temporal and spatial differences in altimeter and buoy data comparison pairs resulted in reduction of RMSE by 5% and 25%, respectively, for the 30-minute and 50 km criteria and 4% and 56% for the 30-minute and 100 km criteria.     

Streaming potential observations, using geothermal wells and in situ electrokinetic coupling coefficients under high temperature

In an attempt to detect streaming potentials induced by subsurface water flows, we have observed the horizontal electric field (self-potential) variations across stationary electric dipoles near geothermal wells in the Takinoue geothermal area, Japan. We observed variations of self-potential which seem to be associated with the water flows in the aquifer, induced by turning on and off the flow of the wells. Amplitudes of the variations are 3–5 mV across 60–200 m dipoles, and can be explained well with a proposed electrokinetic model: the streaming potential coefficient of − 15 mV/bar and/or the ζ-potential of −50 to −100 mV in the aquifer are appropriate to explain the observed data by the model. The obtained electrokinetic coupling coefficients are in situ ones and determined for crustal rock-water system under high temperature (˜200°C) condition. The present results, together with a laboratory study by Ishido and Mizutani (1981), give fundamental information on electrokinetic coupling coefficients in the earth's interior, and are very important when we make quantitative interpretations of self-potentials generated by geothermal activity on the basis of electrokinetic effects.     

Bastnaesite from Kanigiri granite, Prakasam district, Andhra Pradesh

For the first time we report bastnaesite and hydroxyl bastnaesite (lanthanum cerium fluoro-carbonate) from the Kanigiri granite. The host granitoids are of A-type and vary in composition from quartz syenites to peralkaline granites. Rare metal and rare earth-bearing minerals identified by X-ray diffraction (XRD) studies in Kanigiri granite are bastnaesite and hydroxyl bastnaesite, besides columbite-tantalite, monazite, fergusonite, thorite and euxenite. Petromineralogical studies have also revealed the presence of bastnaesite. The presence of bastnaesite in Kanigiri granite suggests that the host felsic rocks may also form a potential source for light rare earth mineral, bastnaesite, apart from the already known rare-metal minerals.     

Process length variation of the cyst of the dinoflagellate Protoceratium reticulatum in the North Pacific and Baltic‐Skagerrak region: calibration as an annual density proxy and first evidence of pseudo‐cryptic speciation

Process length variation of cysts of the dinoflagellate Protoceratium reticulatum (Claparède et Lachmann) Bütschli in surface sediments from the North Pacific was investigated. The average process length showed a significant inverse relation to annual seawater density: σ_{t annual} = ?0.8674 × average process length + 1029.3 (R² = 0.84), with a standard error of 0.78 kg m^?3. A sediment trap study from Effingham Inlet in British Columbia revealed the same relationship between average process length and local seawater density variations. In the Baltic–Skagerrak region, the average process length variation was related significantly to annual seawater density: σ_{t annual} = 3.5457 × average process length ? 993.28 (R² = 0.86), with a standard error of 3.09 kg m^?3. These calibrations cannot be reconciled, which accentuates the regional character of the calibrations. This can be related to variations in molecular data (small subunit, long subunit and internal transcribed spacer sequences), which show the presence of several genotypes and the occurrence of pseudo‐cryptic speciation within this species. Copyright © 2012 John Wiley & Sons, Ltd.     

Hydrogeochemical and isotopic composition of a low-temperature geothermal source in northwest Turkey: case study of Kirkgecit geothermal area

Chemical and isotopic compositions of three hot springs and one cold spring in the Kirkgecit geothermal field, located 15 km southwest of Canakkale-Biga in the northwest of Turkey, were monitored five times during 2005 and 2007. The physico-chemical characteristics of the hot springs are average discharge 3–3.5 L/s, surface temperature 45–52°C, pH 8.9–9.3, and electrical conductivity (EC) 620–698 μS/cm. The cold spring has a temperature of 12–13°C, pH 7.5–8.3, and EC 653–675 μS/cm. The hot waters are Na-SO₄ type, whereas the cold water is Ca-HCO₃ type. Chemical geothermometers suggest that the reservoir temperature is around 80–100°C. The isotopic data (oxygen-18, deuterium and tritium) indicate that the thermal waters are formed by local recharge and deep circulation of meteoric waters.     

Assessment of radioactive contaminants in by-products from Yatagan (Mugla, Turkey) coal-fired power plant

. Coal-burning power plants in Turkey produce large quantities of coal-related wastes, which are collected through the use of various systems. Coal ash is presently accumulating in Turkey at a rate in excess of 10 million tons (t) annually. Roughly 1% of this is being used in a variety of products such as concrete, aggregate in stabilizing roadways, etc. When coal is burned, loss of material results in an increased concentration of most radionuclides found in the waste material. The object of this study is to analyze radiochemical element concentration of coal, bottom ash, and fly ash, and to evaluate the gross radium isotope activities in groundwaters around Yatagan Thermal Power Plant. The results show that the waste disposal site near the thermal power plant contains a major enhancement of radioactivity.     

Direct PCR amplification of the 16S rRNA gene from single microbial cells isolated from an Antarctic iceberg using laser microdissection microscopy

Here, we describe a technique that allows the genetic linage analysis of 16S rRNA genes in bacteria observed under a microscope. The technique includes the isolation of microbial cells using a laser microdissection microscope, lysis of the cells, and amplification of the 16S rRNA genes in the isolated cells without interference by bacterial DNA contamination from the experimental environment or reagents. Using this technique, we successfully determined 15 16S rRNA gene sequences in cells isolated from an Antarctic iceberg. These sequences showed 94%–100% identity to their closest strains, which included bacteria that occur in aqueous, marine, and soil environments.     

Driftwood deposition from debris flows at slit-check dams and fans

Experience shows that debris flows containing large woody debris (driftwood) can be more damaging than debris flows without driftwood. In this study, the deposition process of debris flows carrying driftwood was investigated using numerical simulations and flume experiments. Debris-flow trapping due to driftwood jamming in a slit-check dam was also investigated. A numerical model was developed with an interacting combination of Eulerian expression of the debris flow and Lagrangian expression of the driftwood, in which the fluctuating coordinates and rotation of the driftwood were treated stochastically. The calculated shapes and thicknesses of a debris-flow fan and the positions and orientations of the deposited driftwood on a debris-flow fan were consistent with experimental flume results. The jamming of driftwood in a slit-check dam was evaluated based on geometry and probability. The simulated results of outflow discharge and the proportion of driftwood passed through the slit-check dam also agreed with the experimental results.     

Prediction of nearshore wave heights using a refraction programme

The Dobson wave refraction programme, modified to incorporate bottom frictional attenuation, is being tested for its universal applicability for prediction of nearshore wave heights. An investigation has been undertaken to test the applicability of this programme for the prediction of wave heights over a gently sloping, wide continental shelf. The study has been carried out in the shelf waters off Alleppey, situated along the southwest coast of India. The measured wave height at a nearshore point and the computed wave height at the same point are compared. The application of Spearman's rank correlation and Wilcoxon's matched-pairs signed-ranks test has indicated that there is a high degree of correlation between the measured and predicted heights. Since similar results have been obtained by Bryant (1979) for steep shelf waters of Australia, it may be concluded that the programme can be used in different coastal waters irrespective of the nature of the shelf gradient, but subject to other limitations of the programme.