青藏高原北部中强以上地震震兆异常的分级特征研究

通过对青藏高原北部中强以上地震前普遍出现的地震活动异常进行了系统的分析和总结,发现各地震活动前兆异常参数与主震震级有分级特征,其结果对未来青藏高原北部中强以上地震的预测具有一定的实用和参考价值.     

Numerical simulation on the evolution of cloud particles in 3-D convective cloud

A 3-D convective cloud model with compressible non-hydrostatic dynamics and the spectral bin microphysics of a 2-D slab-symmetric model has been used to simulate an observed supercell storm occurring on 29 June, 2000 near Bird City, Kansas, USA. The main objective of this paper is to study the evolution of particles in this convective storm with bin spectral microphysics scheme. Graupels form and grow through two mechanisms, deposition and riming, with the riming process dominant on top of the inflow and in the upper portion of main updraft. Over the outflow and during the developing and mature stages of the storm, graupel particles mainly grow through deposition with dominant unimodal spectra. Most fall out after growing up. Reducing initial relative humidity disturbance (increasing initial potential temperature disturbance) has negative impact on the formation and growth of graupels over the inflow (outflow). This study shows that large graupel and hail could be suppressed by altering the deposition and coalescence process over the inflow and main updraft. At different locations of the convective cells and with different initial humidity and potential temperature disturbance, the graupel formation and growth mechanisms are different, so as to the feasible hail suppression locations and methods. Supported by National Natural Science Foundation of China (Grant Nos. 40537034, 40805057), and Foundation of Key Laboratory of Meteorological Disaster of Ministry of Education in Nanjing University of Information Science & Technology (Grant No. KLME060202)     

Difference of mercury bioaccumulation in red mullets from the north-western Mediterranean and Black seas

The relationships between total mercury (Hg) concentration and stable nitrogen isotope ratio (δ¹⁵N) were evaluated in Mullus barbatus barbatus and M. surmuletus from the Mediterranean Sea and M. barbatus ponticus from the Black Sea. Mercury concentration in fish muscle was six times higher in the two Mediterranean species than in the Black Sea one for similar sized animals. A positive correlation between Hg concentration and δ¹⁵N occurred in all species. Increase in Hg concentration with δ¹⁵N was high and similar in the two Mediterranean fishes and much lower in the Black Sea species. Since this was neither related to trophic level difference between species nor to methylmercury (MeHg) concentration differences between the north-western Mediterranean and the Black Sea waters, we suggested that the higher primary production of the Black Sea induced a dilution of MeHg concentration at the base of the food webs.     

The <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar geochronology constraint and geological significance of mylonites in Shangyi-Chicheng fault belt on the north of North China Craton

A dating of two biotite samples taken from the meso- and low-temperature mylonites within the Shangyi-Chicheng fault belt on the north of the North China Craton yields ⁴⁰Ar/³⁹Ar isotopic ages of (399 ± 1) Ma and (263 ± 2) Ma, respectively. These data reflect an Early Devonian deformation and a Late Carboniferous retrograde metamorphism event along the fault, suggesting that the tectonic activities of the North China Craton in Paleozoic should be reconsidered.     

<Emphasis Type="Italic">In-situ</Emphasis> trace element analyses and Pb-Pb dating of zircons in granulite from Huangtuling,Dabieshan by LAM-ICP-MS

It is revealed by CL images that there are multi-stage growth internal structures of zircons in the Huangtuling granulite, including the inherited zircons, protolith zircons, sector and planar zone zircons and retrograde zircons. In-situ trace element compositions and Pb-Pb ages have been analyzed by LAM-ICP-MS. The sector and the planar zone domains show typical trace element characteristics of granulite zircon (low Th, U, Th/U, total REEs, clear negative Eu anomalies, relatively depleted HREE and small differential degree between MREE and HREE, etc.), indicating that they formed during granulite-facies metamorphism. The protolith zircons have trace element characteristics of crustal zircon (high Th, U, Th/U, total REEs and enriched HREEs, etc.). 12 analyzed spots on granulite-facies domains give a weighted mean ²⁰⁷Pb/²⁰⁶Pb age of (2154±26) Ma (MSWD = 3.8), which is the best estimated age of granulite-facies metamorphism of this sample. The weighted mean ²⁰⁷Pb/²⁰⁶Pb age of 5 analyzed spots on protolith zircon domains is (2714 ± 22) Ma (MSWD = 1.4), which represents the protolith forming time. The discovery of ca. 3.4 Ga inherited zircon indicates that there are Palaeoarchean continental materials in this area. The interpretation of formation conditions and the ages of zircons can be constrained by simultaneous in-situ analysis of trace elements and ages.     

Distribution of ionospheric O<Superscript>+</Superscript> ion in synchronous altitude region

Based on satellite observation data, using dynamics equation, the ionospheric O⁺ ion’s distribution in the synchronous altitude region for different geomagnetic activity indexK _p is studied by theoretical modeling and numerical analyzing, and semi-empirical models for the O⁺ ion’s density and flux versus longitude in the synchronous altitude region for differentK _p are given. The main results show that in the synchronous altitude region: (i) The O⁺ ion’s density and flux in day-side are larger than those in nightside. (ii) With longitude changing, the higher the geomagnetic activity indexK _p is, the higher the O⁺ ion’s density and flux, and their variation amplitude will be. The O⁺ ion’s density and flux whenK _{p ≥} 6 will be about ten times as great as that whenK _p = 0. (iii) WhenK _p = 0 orK _{p ≥} 6, the O⁺ ion’s density reaches maximum at longitudes 120° and 240° respectively, and minimum in the magnetotail. WhenK _p = 3−5, the O⁺ ion’s density gets to maximum at longitude 0°, and minimum in the magnetotail. However, the O⁺ ion’s flux reaches maximum at longitude 120° and 240° respectively, and minimum in the magnetotail for anyK _p value.     

Oxygen isotope compositions of quartz grains (4–16 μm) from Chinese eolian deposits and their implications for provenance

Oxygen isotope compositions were measured in quartz grains extracted from a 7.0 Ma red clay-loess sequence at Lingtai and six late Pleistocene loess sediments (Malan loess). Results show that the changes in oxygen isotope compositions of Malan loess are basically controlled by the geochemical characteristics of the source materials, while the effect of weathering process after dust deposition could be minor. The oxygen isotope distribution of quartz grains from red clay at Lingtai is similar to that of the overlying loess-paleosol sequence, thus indicating that the red clay at Lingtai has the same eolian origin as the loess-paleosol deposits. Furthermore, the oscillations of the isotope compositions in 4–16 μm-sized quartz grains may reflect the changes, to some extent, of the climatic systems of the source region.     

The carbon isotope composition of C<Superscript>3</Superscript> herbaceous plants in loess area of northern China

¹³C of 367 C₃ herbaceous plants was measured in loess area in northern China. Their δ¹³C values vary between −21.7%. and −30.0%., with a mean of −26.7%.. In the center of Loess Plateau (semimoist area) with annual precipitation of 400–600 mm, the δ¹³ C values of C₃ herbaceous plants range from −24.4%. to −28.5%., with a mean of −27.5%.. In the west of Loess Plateau (semiarid and arid area) with annual precipitation less than 400 mm, they range between −21.7%. and −30.0%., with a mean of −26.2%.. Annual precipitation is the main factor that makes δ¹³C values of C₃ herbaceous plants in the west greater than those in the central Loess Plateau. The composition of δ¹³C in C₃ plants increases with deceasing annual precipitation, and the mean change is −49%./100 mm.     

Sea-level changes and hydrothermal sedimentary mineralization of large-superlarge ore deposits among Sinian to Triassic in South China

Among the Sinian to Triassic strata in South China, the stratiform, quasi-stratiform and lenticular metallic deposits in association with hydrothermal sedimentation mainly occur in the four periods: (1) the Sinian Datangpo interglacial period, (2) the early period of Early Cambrian, (3) the late period of Middle Devonian to early period of Late Devonian, and (4) the late period of Early Permian. The four mineralization periods all happened around the maximum flooding period in the third-order seal-level cycle during the ascending stage in the first-order sea-level cycle. The deep seawater layer, starved and non-compensatory basin, low sedimentary rate, and low energy and anoxic environment during the maximum flooding period are very suitable for the formation and preservation of large to superlarge hydrothermal sedimentary deposits. The maximum flooding period also coincided with the intensified regional tectonism, extensive deep magmatism and hydrothermal sedimentation, which provide, for the formation of large to superlarge hydrothermal sedimentary deposits through the rapid accumulation of hydrothermal sediments, the needed dynamics, ore-forming materials and favorable passway for hydrothermal fluids to enter the basin.     

Tectono-thermal modeling of the Yinggehai Basin,South China Sea

Based on the observed data, the average value of surface heat flow in the Yinggehai Basin is calculated and it turns out to be 84.1 mW/m². The thermal evolution of the basin since the Cenozoic era has been attempted by tectono-thermal modeling. Three-phase extension made the basin become hotter and hotter, reaching its climax in paleo-temperature history since 5.2 Ma. And nowadays, the basin is in the heat flow decreasing period. During the Cenozoic era, the basement heat flow remained at 50–70 mW/m² all the time. This is related to the degree of each extension phase, stretching rate mode and also the limited basin scale. Modeling results also show that, the surface heat flow is controlled mainly by the basement heat flow, and less than 20% comes from radiogenic heat production in the sediments of the basin