Early Permian ammonoids from the Kaeng Krachan Group of the Phatthalung-Hat Yai area, southern peninsular Thailand

An Early Permian small ammonoid fauna consisting of Neocrimites sp., Agathiceras suessi Gemmellaro, A. girtyi Böse, Agathiceras? sp., and Miklukhoceras sp. was found in nodules of a fine sandstone bed exposed in the Phatthalung-Hat Yai area of southern peninsular Thailand. The ammonoid-bearing bed belongs stratigraphically to the uppermost part of the Kaeng Krachan Group, which is essentially a clastic-dominant, Late Carboniferous (?) to Early Permian stratigraphic unit, widely distributed in western and peninsular Thailand. This ammonoid fauna is considered to be of Bolorian (Kungurian) age and includes Agathiceras girtyi Böse, which is described for the first time from Thailand. The present discovery of Bolorian ammonoids suggests that the uppermost part of the Kaeng Krachan Group is slightly younger than previously considered and around the latest Early Permian. This further implies that the continental margin environment of the Sibumasu Block drastically changed at around Bolorian time from a cool, clastic-dominant shelf condition to a temperate to subtropical, carbonate platform due to rapid northward drift after middle Artinskian rifting.     

Fluctuation in proteinaceous labile organic matter verified with degradation rate constants of terrestrial biochemical indicators

Biogenic amino acids, taken as representative of organic matter, were analyzed to determine the apparent degradation rate constant in boreal terrestrial sediment. Age determination using ¹⁴C dating gave two rate constants: the initial degradation rate constant for glycine (k_{GLY 1}), the simplest amino acid, was 1.5 × 10⁻³ yr⁻¹ (r = 0.97) until about 2200 yr BP. After the inflection point, the rate constant k_{GLY 2} was 9.1 × 10⁻⁵ yr⁻¹ (r = 0.73). The degradation of amino acids in the labile organic matter in the sediment was markedly affected by rapid processes. After the inflection point, the rate constant profiles for sub-surface amino acids were shown to have discontinuous relationships with sediment age. One pattern which emerged in the vertical distribution is that the biogenic amino acid degradation rate constant k was far greater in the labile organic matter phase than that in the refractory organic matter over the past 10,000 years.     

Thermal structure and uplift of the Cretaceous Shimanto Belt, Kii Peninsula, Southwest Japan: An illite crystallinity and Mite bo, lattice spacing study

Abstract Illite crystallinity (IC) and illite b, lattice spacing were measured across the Cretaceous Shimanto Belt, Kii Peninsula, Southwest Japan. For the IC survey, 103 samples of argillaceous rocks were analyzed from the central area and the western area of the belt. Values of IC (Kubler Index) vary between 0.28 and 0.71 Δ°2θ and indicate diagenetic and anchizone metamorphism respectively. The IC distribution reveals two contrasting patterns of thermal maturity. The Hanazono Formation, exposed in the northern area of the belt, generally dips north, but IC values increase systematically from 0.28 Δ°2θ in the north to 0.54 Δ°2θ in the south and indicate an inverted thermal structure. Values in other formations vary widely in the southern area of the belt ranging between 0.45 and 0.71 Δ°2θ, but the values do not show any systematic change from north to south and on average remain almost constant. Illite b_o, lattice spacing values for 56 samples vary between 9.006 and 9.041 Å corresponding to intermediate pressure conditions of the metamorphic facies. These values, combined with paleotemperatures estimated from IC, indicate paleogeothermal gradients of 22 and 31°C/km for the northern and southern areas of the belt, respectively. The inverted thermal structure of the Hanazono Formation, together with a lower paleogeothermal gradient, possibly is a result of the subduction of a relatively cold oceanic plate during the Late Cretaceous. The higher geothermal gradient could be a product of late thermal overprinting caused by the later subduction of a comparatively younger and hotter oceanic plate during the Eocene.     

Shear Strength Behavior of Two Landfill Clay Liners

Direct shear tests were conducted to obtain both the shear strength of compacted clay liners (CCLs) specimens and the interface shear strength between compacted clay liner and base soil. These experiments were conducted under the conditions of five different water contents. The experimental results show that shear strength of both CCLs and CCLs/base interface decreases with the increase in the water content of CCLs and base soil. In addition, the considerate concentration of NaCl in leachate has no deteriorating effect on the shear strength of liners. Triaxial shear tests were also conducted on clay liner specimens to obtain total and effective shear strength under a fast compression. The shear strength c‘=100 kPa for sand-bentonite, respectively. These results indicate that the compacted clay-bentonite shows normal consolidation, but that the compacted sand-bentonite exhibits over-consolidation.     

Characterization of sulfate mineral deposits in central Thailand

In this paper we present petrographic and geochemical data of sulfate mineral deposits in northeast Nakhon Sawan, central Thailand, and provide new constraints on their age. The deposits are made up mainly of strongly deformed nodular and massive gypsum in the upper part, and less deformed layered anhydrite in the lower part. They are intruded by andesitic dikes that contain Middle Triassic zircons (ca 240 Ma). These dikes are probably part of the regional magmatic activity of the Sukhothai Arc during the Early to Middle Triassic. Sulfur (δ³⁴S) and strontium (⁸⁷Sr/⁸⁶Sr) isotopic compositions of the sulfates range from 15.86 ‰ to 16.26 ‰ and from 0.70810 to 0.70817, respectively. Comparisons with the Phanerozoic seawater isotopic evolution curve indicate that those values are best explained by precipitation of the sulfates from Carboniferous seawater, in particular seawater of late Mississippian age (ca 326 Ma), and this would be consistent with previous studies of calcareous fossils in the limestones that crop out around this site. Our interpretation is that evaporitic gypsum was originally precipitated from hypersaline seawater on a shallow lagoon or shelf on the Khao Khwang Platform during the Serpukhovian, and that this gypsum changed to anhydrite during early burial. The anhydrite was then cut by andesitic dikes during the Middle Triassic, and more recently the upper part of which was rehydrated during exhumation to form secondary gypsum near the surface.     

Preface to the special issue on electromagnetic phenomena related to seismic and volcanic activities from EMSEV in 2016

<正>EMSEV,Electromagnetic Studies of Earthquake and Volcanoes,set up in 2002,is a joint academic organization by multi-associations in IUGG(International Union of Geodesy and Geophysics),including IAGA(International Association of Geomagnetism and Aeronomy),IASPEI(International Association of Seismology and Physics of the Earth’s Interior),IAVCEI(International Association of Volcanology and Chemistry of the Earth’s Interior).On     

Modeling of the branches of the Tsushima Warm Current in the Eastern Japan Sea

The branches of the Tsushima Warm Current (TWC) are realistically reproduced using a three-dimensional ocean general circulation model (OGCM). Simulated structures of the First Branch and the Second Branch of the TWC (FBTWC and SBTWC) in the eastern Japan Sea are mainly addressed in this study, being compared with measurement in the period September–October 2000. This is the first numerical experiment so far in which the OGCM is laterally exerted by real volume transports measured by acoustic Doppler current profiler (ADCP) through the Tsushima Straits and the Tsugaru Strait. In addition, sea level variation measured by tide-stations along the Japanese coast as well as satellite altimeters is assimilated into the OGCM through a sequential data assimilation method. It is demonstrated that the assimilation of sea level variation at the coastal tide-stations is useful in reproducing oceanic conditions in the nearshore region. We also examine the seasonal variation of the branches of the TWC in the eastern Japan Sea in 2000. It is suggested as a consequence that the FBTWC is continuous along northwestern Honshu Island in summertime, while it degenerates along the coast between the Sado Strait and the Oga Peninsula in other seasons. On the other hand, a mainstream of the SBTWC exists with meanders and eddies in the offshore region deeper than 1000 m to the north of the Sado Island throughout the year.     

Notes on non-marine bivalve Trigonioides (Trigonioides?) from the mid-Cretaceous Goshoura Group, Kyushu, Japan

Trigonioides goshourensis n. sp. and Trigonioides amakusensis Kikuchi and Tashiro occur in the late Albian Eboshi Formation of the Goshoura Group in Kyushu, Japan. These Albian species are characterized by three radial pseudocardinal teeth on the thick and wide hinge plate, and are probably ancestors of Cenomanian species of Trigonioides (Kumamotoa) with four radial pseudocardinal teeth. This chronological relation may be important for the correlation of non-marine Cretaceous strata in East Asia. In addition, the habitat of T. amakusensis is interpreted as estuarine tidal flats under brackish water conditions, although Trigonioides is generally a freshwater bivalve genus.     

Phase transition in CaSiO3 perovskite

A phase transition in pure CaSiO₃ perovskite was investigated at 27 to 72 GPa and 300 to 819 K by in-situ X-ray diffraction experiments in an externally-heated diamond-anvil cell. The results show that CaSiO₃ perovskite takes a tetragonal form at 300 K and undergoes phase transition to a cubic structure above 490–580 K in a pressure range studied here. The transition boundary is strongly temperature-dependent with a slightly positive dT / dP slope of 1.1 (± 1.3) K/GPa. It is known that the transition temperature depends on Al₂O₃ content dissolved in CaSiO₃ perovskite [Kurashina et al., Phys. Earth Planet. Inter. 145 (2004) 67–74]. The phase transition in CaSiO₃(+ 3 wt.% Al₂O₃) perovskite therefore could occur in a cold subducted mid-oceanic ridge basalt (MORB) crust at about 1200 K in the upper- to mid-lower mantle. This phase transition is possibly ferroelastic-type and may cause large seismic anomalies in a wide depth range.     

High-pressure behavior of MnGeO3 and CdGeO3 perovskites and the post-perovskite phase transition

The stability and high-pressure behavior of perovskite structure in MnGeO₃ and CdGeO₃ were examined on the basis of in situ synchrotron X-ray diffraction measurements at high pressure and temperature in a laser-heated diamond-anvil cell. Results demonstrate that the structural distortion of orthorhombic MnGeO₃ perovskite is enhanced with increasing pressure and it undergoes phase transition to a CaIrO₃-type post-perovskite structure above 60 GPa at 1,800 K. A molar volume of the post-perovskite phase is smaller by 1.6% than that of perovskite at equivalent pressure. In contrast, the structure of CdGeO₃ perovskite becomes less distorted from the ideal cubic perovskite structure with increasing pressure, and it is stable even at 110 GPa and 2,000 K. These results suggest that the phase transition to post-perovskite is induced by a large distortion of perovskite structure with increasing pressure.