Plutonium diffusivity in compacted bentonite

Measurements on plutonium diffusivity in water-saturated compacted bentonite were carried out. Representative specimens of sodium bentonite were taken from the Tsukinuno and Kuroishi mines situated in northeast Japan. Tsukinuno bentonite was divided into three types: raw type, purified Na-type, and H-type which was prepared by treating Na-type bentonite with hydrochloric acid. Kuroishi bentonite contained chlorite as impurity. H-type bentonite was used as reference for the convenience of profile measurement in bentonite, since plutonium diffusivity in H-type bentonite was considered to be larger than that in Na-type bentonite because of low pH and low swelling pressure of H-type bentonite.

Sampled bentonite was compacted into pellets of 20 mm in diameter and 20 mm in height. Bulk densities of these specimens were 1200–1800 kg/m³ for purified Na-type and H-type bentonite and 1600 kg/m³ for raw type bentonite.

Plutonium profiles obtained in H-type bentonite can be explained by diffusion equation with constant concentration source. Diffusivity ranges from 10^-13 to 10¹² m²/s for H-type and Kuroishi impure sodium bentonite. Diffusivity in both raw type and purified Tsukinuno bentonite was was estimated to less than 10^-14 M²/s. Diffusivity in H-type bentonite showed a tendency to decrease with increasing density. Influence of in bentonite was also studied. Quartz content up to 50% or hematite content up to 1% did not influence diffusivity significantly in H-type bentonite.

The chemical species of plutonium in pore water of Na-type and H-type were estimated Pu(OH)₃^-; and PuO₂^- , respectively.     

双壳类软体动物的水产遗传学研究进展

双壳类是水产养殖业中非常重要的养殖贝类,在世界范围其产量日益增长。作者综述了近年来双壳类遗传学研究进展,包括遗传变异、数量遗传、选种育种、杂交育种、染色体及分子遗传学等领域的最新研究进展。     

A Proposed Method to Estimate In Situ Dissolved Gas Concentrations in Gas‐Saturated Groundwater

Gas‐saturated groundwater forms bubbles when brought to atmospheric pressure, preventing precise determination of its in situ dissolved gas concentrations. To overcome this problem, a modeling approach called the atmospheric sampling method is suggested here to recover the in situ dissolved gas concentrations of groundwater collected ex situ under atmospheric conditions at the Horonobe Underground Research Laboratory, Japan. The results from this method were compared with results measured at the same locations using two special techniques, the sealed sampler and pre‐evacuated vial methods, that have been developed to collect groundwater under its in situ conditions. In gas‐saturated groundwater cases, dissolved methane and inorganic carbon concentrations derived using the atmospheric sampling method were mostly within ±4 and ±10%, respectively, of values from the sealed sampler and pre‐evacuated vial methods. In gas‐unsaturated groundwater, however, the atmospheric sampling method overestimated the in situ dissolved methane concentrations, because the groundwater pressure at which bubbles appear (P_critical) was overestimated. The atmospheric sampling method is recommended for use where gas‐saturated groundwater can be collected only ex situ under atmospheric conditions.     

Environmental Factors Affecting the Occurrence and Production of the Spring Phytoplankton Bloom in Funka Bay, Japan

The concentration of nutrients was measured during the spring phytoplankton bloom in Funka Bay over a 5-year period (1988–92). During the winter mixing period, nutrient concentrations were similar in every year except in 1990 when a high concentration of silicate was observed. There was interannual variation in the onset of the bloom, presumably depending on the stability of the water column. The bloom developed in early March when the Oyashio water (OW), which has a lower density than the existing winter water, flowed into the bay and the pycnocline formed near the bottom of the euphotic zone. In this case, high chl a was found only in the euphotic zone and nutrient utilization was limited to this zone. In the year when the inflow of OW was not observed by April, the bloom took place at the end of March without strong stratification and high chl a was found in the whole water column, accompanied by a decrease in nutrients. Interannual differences were found not only at the beginning of the decrease, but also in the thickness of the layer which showed a decrease in nutrients. Primary production from the beginning to the end of the spring bloom was estimated from the nutrient budget before and after the spring bloom. The integrated production over the spring bloom period ranged from 25 to 73 g C m^-2, which accounts for 19–56% of the annual production in this bay. We found that the timing of the bloom was strongly dependent on the inflow of OW, but the amount of production was not clearly related to this timing.     

A Method for Rapid Determination of Re and Os Isotope Compositions Using ID‐MC‐ICP‐MS Combined with the Sparging Method

A simple, rapid method for the determination of Re and Os concentrations and isotope compositions using isotope dilution multi‐collector inductively coupled plasma‐mass spectrometry (ID‐MC‐ICP‐MS) combined with Carius tube digestion and sparging introduction of Os was developed. For Os measurement, four channeltron ion counters to detect different Os isotopes were used simultaneously, which led to a drastic reduction in the measurement time. Rhenium isotopes were measured by means of eight Faraday cups with solution nebulisation and an ultrasonic membrane desolvator. The representative ¹⁸⁸Os count rate of an Os standard solution containing 50 pg of total Os was approximately 110000–120000 cps at the onset of measurement; the Re intensity of our in‐house 10 pg g^?1 standard solution reached 1820 V/μg g^?1 with a sample uptake rate of 95–99 μl min^?1. These values indicate that the sensitivity of the method was sufficient even for samples with low Re and Os concentrations, such as chert. As the temporal variations of the amplification efficiency of the ion counters differed from one another, we adopted a sample‐calibrator bracketing method to correct the measured Re and Os isotope ratios. The Re and Os concentrations via the isotope dilution method and the ¹⁸⁷Os/¹⁸⁸Os ratios of two sedimentary rock reference materials (JMS‐2 and JCh‐1) on the basis of the isotope ratios determined by the MC‐ICP‐MS and by negative thermal ionisation mass spectrometry (N‐TIMS) were comparable within their ranges. Based on Os isotope measurement of the IAG reference material [Durham Romil Os (DROsS)], the average difference from the recommended value and precision of Os isotope measurements by the sparging method in combination with multi‐ion‐counters were 0.72% and 0.76% [1RSD (%), n = 29], respectively. The precisions in the ¹⁸⁷Os/¹⁸⁸Os ratios [1RSD (%)] of JMS‐2, JCh‐1 and DROsS were 0.35–0.71, 1.56–3.31 and 0.99–1.28%, respectively, which depended on their Os ion intensities. No systematic difference was observed between the Re and Os geochemical compositions of JCh‐1 and JMS‐2 obtained by means of digestion with inverse aqua regia and CrO₃‐H₂SO₄ solutions, suggesting that either acid solution can be used for the sparging method of sedimentary rock samples. As CrO₃‐H₂SO₄ solution is believed to liberate predominantly the hydrogenous Re and Os fraction from organic‐rich sediment, the sparging method combined with CrO₃‐H₂SO₄ digestion and multi‐ion‐counters in the mass spectrometry is expected to be a powerful tool for reconstructing the secular change in marine Os isotope compositions with high sample throughput.     

New insights into the origin of O–Hf–Os isotope signatures in arc lavas from Tonga–Kermadec

O, Hf and Os isotope data are presented for lavas from the highly depleted Tonga–Kermadec arc. O isotope values overlap with those of MORB limiting the amount of interaction with the arc crust. δ¹⁸O does not increase northwards as would be expected from the ~ 4 fold increase in subduction rate if slab-derived fluids had high ¹⁸O/¹⁶O ratios. Thus, the overall northward decrease in HFSE concentrations likely reflects depletion due to prior melt extraction, not increasing extents of melting. Hf isotopes are strongly negatively correlated with Be isotopes consistent with mixing of subducted pelagic sediment into the mantle wedge and do not require Hf to be fluid mobile. With the exception of a boninite from the north Tongan trench, the northern Tonga lavas do not overlap the Hf isotope composition of either the Samoan plume or the subducting Louisville volcaniclastic sediments. Thus, the Pb isotope signatures in these lavas must have been added by fluids and sediment melts derived from the Louisville volcaniclastics with minimal mobilisation of Hf. This suggests conservative behaviour for this element due to the formation of residual zircon during partial melting of the subducted sediments. ¹⁸⁷Os/¹⁸⁸Os ranges from 0.1275 to 0.4731 and the higher Os isotope ratios reflect the sensitivity of this system to even minor interaction with altered arc crust. Conversely, the lowest Os ratios are subchondritic and indicate that transfer of radiogenic Os from the slab is not all pervasive and provide an important constraint on the composition of the mantle wedge. Remarkably, the least radiogenic sample is a dacite demonstrating that evolved magmas can develop by fractionation from mantle-derived magmas with minimal interaction with the arc crust.     

Two records of patchy occurrences of the oceanic shrimpSergestes similis Hansen off the east coast of Honshu,Japan

Two recent records of the occurrences of the pelagic shrimp,Sergestes similis Hansen, are reported. They provide evidence of dense swarms ofS. similis in midwater off the east coast of Honshu, Japan, in spring. On one occasion,S. similis was found in a stomach of the basking shark,Cetorhinus maximus (Gunnerus). The shark, 8.11 m in total length, was accidentally trapped in a set net off Izu-oshima Island on April 18, 1974, and its foregut was filled only withS. similis. Feeding and swimming behavior of the basking shark, condition of the gut contents, and temperature profiles of the sea revealed thatS. similis was preyed upon by the shark near the island when the shrimp swarmed below 100 m depth at night. On another occasion,S. similis was fished by a commercial ground trawler 31 miles off Cape Shioyazaki on April 4 and 5 and off Hitachi on April 11, 1976. The trawlings were made around 500 m depth at daytime, and a total of 3.8 tons ofS. similis was caught and marketed. The size-frequency distribution and sex ratio ofS. similis in both occurrences from off Izu-oshima Island and off Cape Shioyazaki coincided very well. The samples consisted of identical population of probably 2nd year class having a body length mode between 46.0 and 50.0 mm. The sex ratio was skewed greatly toward females in both samples, that is 38∶2 and 100∶3 respectively. These two phenomena are discussed in relation to the life history ofS. similis.     

Clarification of regional and local in situ stresses using the compact conical-ended borehole overcoring technique and numerical analysis

Abstract Stress measurement is performed to estimate the states of in situ rock stress at the Torigata open‐pit limestone mine in Japan using the compact conical‐ended borehole overcoring (CCBO) technique. A set of back and forward analyses are then carried out to evaluate the states of regional and local in situ rock stresses and the mine‐induced rock slope stability using a 3‐D finite element model. The maximum horizontal local in situ rock stress measured by the CCBO technique acts in the northeast–southwest direction. The horizontal regional tectonic stresses obtained by the back analysis are in good agreement with those of the horizontal local in situ rock stress measured by the CCBO technique. However, the horizontal regional tectonic stress is more compressive than the horizontal local in situ rock stress. This is because the horizontal regional stress due to gravity is not considered in the back‐analyzed horizontal regional tectonic stress, but it is included in the local in situ rock stress measured by the CCBO technique. The local stress obtained by the forward analysis, especially its horizontal components, is in good agreement with the horizontal local in situ rock stress measured by the CCBO technique, and the magnitude of the vertical normal stress increases more rapidly than those of the horizontal normal stresses with depth. As a result, the ratio of the horizontal normal stress to the vertical normal stress is largest at the nearest excavation level and decreases with depth. This means that the stress field within the mine‐induced rock slope is affected by the horizontal components of the local in situ rock stress.