An approach to response-based reliability analysis of quasi-linear Errors-in-Variables models

The paper presents an approach to internal reliability analysis of observation systems known as Errors-in-Variables (EIV) models with parameters estimated by the method of least squares. Such problems are routinely treated by total least squares adjustment, or orthogonal regression. To create a suitable environment for derivations in the analysis, a general nonlinear form of such EIV models is assumed, based on a traditional adjustment method of condition equations with unknowns, also known as the Gauss–Helmert model. However, in order to apply the method of reliability analysis based on the approach to response assessment in systems with correlated observations, presented in the earlier work of this author, it was necessary to confine the considerations to a quasi-linear form of the Gauss–Helmert model, representing quasi-linear EIV models. This made it possible to obtain a linear disturbance/response relationship needed in that approach. Several specific cases of quasi-linear EIV models are discussed. The derived formulas are consistent with those already functioning for standard least squares adjustment problems. The analysis shows that, as could be expected, the average level of response-based reliability for such EIV models under investigation is lower than that for the corresponding standard linear models. For EIV models with homoscedastic and uncorrelated observations, the relationship between the average reliability indices for the independent and the dependent variables is formulated for multiple regression and coordinate transformations. Numerical examples for these two applications are provided to illustrate this analysis.     

Motion of salt water and associated fronts in tideless estuaries

The hydrodynamics of saline water in Polish estuaries are addressed in this paper. The phenomena are described on the basis of field data from several types of estuaries along the Polish Baltic Coast. Field measurements were made to reveal and to characterize the physical processes in these estuaries; this information was then used for analytic testing and verification of mathematical models. The results demonstrate the unsteady and changeable nature of both the flow conditions and the motion of salt water in tideless estuaries. The magnitudes and directions of the barotropic and baroclinic horizontal pressure gradients have a marked influence on the flow characteristics and motion of salt water in these tideless estuaries.     

Biosorption optimization and equilibrium isotherm of industrial dye compounds in novel strains of microscopic fungi

The aim of this study was to evaluate the biosorption capacity of selected strains of microscopic fungi. We optimized the biosorption process and used the Freundlich isotherm for three strains: H. haematococca BwIII43, K37 and T. harzianum BsIII33 to describe the biosorption equilibrium of anthraquinone dye, Alizarin Blue Black B (ABBB) and alkali lignin (AL). In optimal conditions (1 g of mycelium biomass, pH = 7.0, 28 °C) for ABBB and AL sorption, the live biomass of H. haematococca BwIII43 was characterized by a higher sorption capacity, amounting to 247.47 and 161.00 mg g^?1, respectively. The highest sorption properties toward anthraquinone dye (K _F = 19.96 mg g^?1) were shown for the biomass of H. haematococca K37. In the presence of alkali lignin, the highest sorption capacity and bond strength exhibited the biomass of H. haematococca BwIII43 (K _F = 28.20 mg g^?1, n = 3.46). Effective decolorization of ABBB and AL by the selected strains of microscopic fungi indicated that the biosorption process additionally enhanced the removal of color compounds from the solution.     

Application of organic petrology and geochemistry to coal waste studies

Coal wastes produced during mining activities are commonly deposited in nearby dumps. These wastes mostly composed of minerals and variable amounts (usually 20-30%) of organic matter start to weather immediately after deposition. Oxidation of the organic matter can lead to self heating and self combustion as a result of organic and mineral matter transformations. The degree of alteration depends on the properties of the wastes, i.e., the maceral and microlithotype composition of the organic matter and its rank.Alteration of wastes also depends on the heating history, i.e., the rate of heating, final heating temperature, duration of heating, and the degree of air access. Although air is probably necessary to initiate and drive the heating processes, these usually take place under relatively oxygen depleted conditions. With slow heating, color of organic matter particles changes, irregular cracks and oxidation rims develop around edges and cracks, and bitumen is expelled. As a result, massive and detritic isotropic and strongly altered organic matter forms. On the other hand, higher heating rates cause the formation of devolatilization pores, oxidation rims around these pores and along cracks, vitrinite-bands-mantling particles, and bitumen expulsions.Organic compounds generated from the wastes include n-alkanes, iso-alkanes, alkylcyclohexanes, acyclic isoprenoids, mainly pristane, phytane and, in some cases, farnesane, sesquiterpanes, tri- and tetracyclic diterpanes, tri- and pentacyclic triterpanes, and steranes, polycyclic aromatic hydrocarbons (mostly with two- to five rings, rarely six rings), and phenols. The compounds formed change during the heating history. The fact that phenols are found in dumps where heating has not yet been completed, but are absent in those where heating ceased previously suggests the presence of water washing. The organic compounds formed may migrate within the dumps. However, when they migrate out of the dumps, they become a hazard to environment.This paper is a review on transformations of organic matter (both maceral composition and reflectance and chemical composition) in coal wastes deposited in coal waste dumps. Immediately after deposition the wastes are exposed to weathering conditions and sometimes undergo self heating processes.     

Effects of an Omnivorous Katydid,Salinity, and Nutrients on a Planthopper-<Emphasis Type="Italic">Spartina</Emphasis> Food Web

Top–down and bottom–up effects interact to structure communities, especially in salt marshes, which contain strong gradients in bottom–up drivers such as salinity and nutrients. How omnivorous consumers respond to variation in prey availability and plant quality is poorly understood. We used a mesocosm experiment to examine how salinity, nutrients, an omnivore (the katydid Orchelimum fidicinium) and an herbivore (the planthopper Prokelisia spp.) interacted to structure a simplified salt marsh food web based on the marsh grass Spartina alterniflora. Bottom–up effects were strong, with both salinity and nutrients decreasing leaf C/N and increasing Prokelisia abundance. Top–down effects on plants were also strong, with both the herbivore and the omnivore affecting S. alterniflora traits and growth, especially when nutrients or salt were added. In contrast, top–down control by Orchelimum of Prokelisia was independent of bottom–up conditions. Orchelimum grew best on a diet containing both Spartina and Prokelisia, and in contrast to a sympatric omnivorous crab, did not shift to an animal-based diet when prey were present, suggesting that it is constrained to consume a mixed diet. These results suggest that the trophic effects of omnivores depend on omnivore behavior, dietary constraints, and ability to suppress lower trophic levels, and that omnivorous katydids may play a previously unrecognized role in salt marsh food webs.     

A protoceratopsid skeleton with an associated track from the Upper Cretaceous of Mongolia

The Djadokhta Formation of the Gobi Desert is known for the number and diversity of dinosaur and other vertebrate bones and skeletons found there, but only theropod, hadrosaur and supposed ankylosaurid footprints have been reported from this stratum. Dinosaur footprints are also noted from the Nemegt Formation, and occur as typical dinosaur track accumulations (tracksites). An articulated protoceratopsid skeleton - specimen ZPAL Mg D-II/3 - was collected by the Polish-Mongolian Expedition of 1965 from the Djadokhta Formation of Flaming Cliffs in Mongolia. Recently, the natural cast of a tetradactyl digitigrade footprint was found underneath the pelvic girdle while the skeleton and matrix were being prepared. This is possibly the first find of a dinosaur track in close association with an articulated skeleton. Although Protoceratops is an extremely common dinosaur in Mongolia, its footprints have never previously been reported from the Late Cretaceous of the Gobi Desert.     

Investigation of superstructures in mullite by high resolution electron microscopy and electron diffraction

Superstructures in synthetic mullite, Al_4+2x Si_2?2x O_10?x , prepared using the zone melting technique, are studied by high resolution electron microscopy (HREM), electron diffraction, and in situ energy dispersive X-ray spectroscopy. For x=0.40 composition HREM images indicate only short-range order. Near x=0.5 composition mullite has an antiphase domain structure with antiphase boundaries (APB's) oriented parallel to (100). For higher Al-content the APB's run in non-rational orientations which are slightly inclined against the {601}-planes. We propose models for the superstructures in which oxygen vacancies are arranged in channels parallel to the crystal b-axis. The models are supported by a one-to-one match between observed and computer-simulated images. An Al-rich limit of x=2/3 for mullite is deduced on the basis of stereochemical considerations. Different ordering schemes for the tetrahedral cations are believed to result in the orientation change of the APB's near x=0.5 composition.     

Redbed-type gold mineralisation, Kupferschiefer, south-west Poland

A new type of gold mineralisation containing minor amounts of platinum and palladium has been found proximal to the secondary redox interface located below the Cu-Ag Kupferschiefer orebody of the Polkowice-Sieroszowice mine in the south-western part of the Lubin-Sieroszowice district, Poland. This deposit can be classified as redbed-type gold. Our study shows that gold, platinum and palladium occur in secondary red-coloured sections of the basal Zechstein sedimentary rocks and in the uppermost Weissliegendes sandstone. Noble metal mineralisation occurs within an average interval of 0.22 m, which lies directly below the copper ores. The average grade of the horizon is 2.25 ppm Au, 0.138 ppm Pt and 0.082 ppm Pd with a metal content of several tens of tonnes of gold. A transition zone has been recognised between the gold-bearing horizon and the copper deposit. This transition zone is characterised by the presence of low grades of copper (<0.2 wt%) and elevated gold contents (>0.5 ppm). Native gold accompanied by electrum, mercury-bearing gold, haematite, covellite, chalcocite, bornite and chalcopyrite has been identified in the gold-bearing horizon. In some sections, Pd-arsenides, tetra-auricupride, Co-arsenides, clausthalite, tennantite, digenite, yarrowite, spionkopite and galena have also been noted.     

Non-woven polypropylene fabric modified with carbon nanotubes and decorated with nanoakaganeite for arsenite removal

Due to its harmful impact on human health, the presence of heavy metals, metalloids and other toxic pollutants in drinking or irrigation water is a major concern. Recent studies have proved that nanosized adsorbents are significantly more effective than their microsized counterparts. Particular attention has been given to nanocomposites with nanoadsorbents embedded in matrixes that could provide stability to the material and contribute to eliminating problems that may appear when using conventional granular systems. This study presents the preparation of a novel hybrid filter from a commercially available polypropylene (PP) non-woven fabric matrix modified with multiwall carbon nanotubes (MWCNT) and iron oxy(hydroxide) nanoparticles, and its use in the removal of As(III). A Box–Behnken statistical experimental design has been chosen to explore relevant variables affecting the filter performance: (1) As(III) concentration, (2) pH and (3) sorbent dose. From an As(III) concentration of 10 mg L^?1, at pH 6.5 and with a sorbent dose of 5 g L^?1, the PP filter modified with MWCNT removes 10% of the initial metalloid concentration, reaching a capacity of 0.27 mg g^?1. After modification with iron oxy(hydroxide), the performance of the material is largely enhanced. The filter, under the same conditions, removes 90% of the initial As(III) concentration, reaching a capacity almost tenfold higher (2.54 mg g^?1). This work demonstrates that the developed hybrid filter is effective toward the removal of As(III) in a wide range of pHs. A cubic regression model to compute the removal of the filter as a function of pH and sorbent dose is provided.     

Composition and origin of organic matter in surface sediments of Lake Sarbsko: A highly eutrophic and shallow coastal lake (northern Poland)

We present an organic geochemical study of surface sediments of Lake Sarbsko, a shallow coastal lake on the middle Polish Baltic coast. The aim was to provide evidence concerning the origin of the organic matter (OM) and its compositional diversity in surface deposits of this very productive, highly dynamic water body. The content and composition of the OM in the bottom sediments were investigated at 11 sampling stations throughout the lake basin. OM sources were assigned on the basis of bulk indicators [total organic carbon (TOC), total nitrogen (TN), δ¹³C_TOC and δ¹⁵N and extractable OM yield], biomarker composition of extractable OM and compound-specific C isotope signatures. The source characterization of autochthonous compounds was verified via phytoplankton analysis. The distribution of gaseous hydrocarbons in the sediments, as well as temporal changes in lake water pH, the concentration of DIC (dissolved inorganic carbon) and δ¹³C_DIC were used to trace OM decomposition.The sedimentary OM is composed mainly of well preserved phytoplankton compounds and shows minor spatial variability in composition. However, the presence of CH₄ and CO₂ in the bottom deposits provides evidence for microbial degradation of sedimentary OM. The transformation of organic compounds in surface, bottom and pore waters via oxidative processes influences carbonate equilibrium in the lake and seasonally favours precipitation or dissolution of CaCO₃.The data enhance our understanding of the relationships between the composition of sedimentary OM and environmental conditions within coastal ecosystems and shed light on the reliability of OM proxies for environmental reconstruction of coastal lakes.