Numerical investigation of undrained cavity expansion in fine-grained soils

Based on the spherical cavity expansion (SCE) problem, Cudmani and Osinov (Can Geotech J 38:622–638, 2001), Osinov and Cudmani (Int J Numer Anal Method Geomech 25:473–495, 2001) developed a semi-empirical method of interpretation of CPT for coarse-grained soils (sand, gravel) using a hypoplastic constitutive model. Using a material-independent shape factor, the cone penetration resistance was related to the limit pressure required to expand a spherical cavity. The shape factor was observed to be a function of the soil state only, in particular the pressure-dependent relative density. This paper presents an analogous interpretation technique for CPT in fine-grained soils using the shape factor concept, Cavity Expansion approach, and a hypoplastic constitutive model. Relations for the shape factor and the limit pressure have been proposed based on the parameters affecting these quantities. A validation of the proposed interpretation technique with experimental results has also been performed.     

Ground motion studies for microzonation in Iran

An important step in effectively reducing seismic risk and the vulnerability of a city located in an earthquake prone area is to conduct a ground motion microzonation study for the desired return period. The International Institute of Earthquake Engineering and Seismology (IIEES) initiated a number of seismic microzonation projects for Iran. This paper presents the steps followed by IIEES in ground motion microzonation. IIEES performs both probabilistic and deterministic seismic hazard analysis. IIEES uses his own fault map for seismotectonic studies and develops modulus and damping curves for the soils in the study area. The experience of ground motion microzonation shows that in almost all cases, the estimated 475-year peak ground acceleration (PGA) values are higher than the PGA proposed by the Iranian seismic code. Although ground motion microzonation in Iran has some shortcomings, IIEES is making new improvement. This includes development in deterministic seismic hazard analysis, two-dimensional and three-dimensional modelling of basin and topographical effects, using microtremor measurements to find shear-wave velocity profiles in high-density urban areas and providing maps for spectral acceleration in the study area.     

Hydrodynamic study of karstic and intergranular aquifers using isotope geochemistry in Basara basin, Sulaimani, North-Eastern Iraq

The study area is located in the border of the high and low folded zone having a semi-arid climate area. This study initiated in 2009–2010, deals essentially with the investigation of the stable isotope (¹⁸O and deuterium ²H) as well as radioactive isotope represented by tritium ³H in rain, carbonate springs, intergranular aquifer, and surface water in order to investigate the source and relative ages of the groundwater and to show the influence of the altitude variations of the isotope composition. In this study and for the first time in the area, a local meteoric water line have been drawn with an empirical formula δ ²H?=?7.7δ ¹⁸O?+?14.4. The δ ¹⁸O–altitude effect was determined using isotopic data for several samples taken from groundwater and surface water; it was approximated at ?0.79?‰/100 m for the entire area of the study. The output of the tritium concentrations in the springs and water well samples revealed to the conclusion that the values closely resembles to the present time tritium concentration in precipitation.     

Effect of the groundwater contribution, the climatic change, and the human-induced activities on the hydrological behavior of discharge playas: a case study Sidi El Hani discharge playa, Tunisian Sahel

This study is meant to provide an insight into how discharge playas, which are strongly influenced by a regional salty groundwater flow regime, such as the discharge playa of Sidi El Hani, would respond to the climatic variability and to the materials coming from the subsurface of the Sahel area. In order to choose the appropriate method, a special care was given in this paper to different methods of investigation of the groundwater contribution in water and salt budgets of saline systems. The hydrogeological map of the surrounding aquifers proved their convergence toward Sidi El Hani discharge playa. As consequence of the dominance of a salty groundwater contribution, the climate variability may be considered minor. Accordingly, the model proposed by this study showed the dominance of the salty water coming from the hydrogeology at the expense of the fresh water coming from the climatic contribution. Moreover, according to the adopted model, the effect of the human-induced activity on the hydrogeological contribution such as the installation of dams in the Tunisian center and the overexploitation of the phreatic aquifer of Kairouan was judged increasing the convergence of Kairouan aquifer towards Sidi El Hani discharge playa. On the other hand, the consumption of salt reserves from the discharge playa tends to decrease its salinization.     

The inner ramp facies of the Thanetian Lockhart Formation,western Salt Range,Indus Basin,Pakistan

The Lockhart Formation from a major carbonate unit of the Paleocene Charrat Group in Upper Indus Basin, Pakistan represents a larger foraminiferal–algal build up deposited in a cyclic sequence of the carbonate ramp. The foraminiferal–algal assemblages of the Lockhart Formation are correlated here to larger foraminiferal biostratigraphic zone, i.e. Shallow Benthic Zone (SBZ3) of the Thanetian Age. Inner ramp lagoon, shoal and fore shoal open marine are three main facies associations represented by wackstone and packstone foraminiferal–algal deposits. These facies are present in a cyclic order and displayed a retrograding carbonate ramp indicating the Thanetian transgressive deposits associated with eustatic sea level rise. The correlation of the microfacies of the Lockhart Formation (Upper Indus Basin) and facies of the Dungan Formation (Lower Indus Basin) provide detailed configuration of the depositional setting of the Indus Basin during the time interval represented by the Thanetian Zone SBZ3.     

Extreme temperatures linked to the atmospheric blocking events in Turkey between 1977 and 2016

Natural Hazards - Extreme maximum (Tx) and extreme minimum temperature (Tn) frequency distributions during summer and winter for blocked conditions were analyzed within Turkey during the period...     

Geochronology,geochemistry, and tectonic setting of the Oligocene magmatic rocks (Marmaros Magmatic Assemblage) in Gökçeada Island,northwest Turkey

Through the ?zmir–Ankara–Erzincan and the Vardar oceans suture zones, convergence between the Eurasian and African plates played a key role in controlling Palaeogene magmatism in northwestern Anatolia, northern Aegean, and eastern Balkans. LA-ICP-MS dating of U and Pb isotopes on zircon separates from the tuffs of the Harmankaya Volcanic Rocks, which are inter-fingered with the lower-middle Eocene deposits of the Gaziköy Formation to the north of the Ganos Fault and the Karaa?aç Formation in the Gelibolu Peninsula, yielded a late Ypresian (51 Ma) age. The chemical characteristics suggest that the lavas and tuffs of the Harmankaya Volcanic Rocks are products of syn- or post-collision magmas. These volcanic rocks show also close affinities to the subduction-related magmas. In addition to the already known andesitic volcanic rocks, our field observations in Gökçeada Island indicate also the existence of granitic and rhyolitic rocks (Marmaros Magmatic Assemblage). Our U–Pb zircon age data has shown that the newly discovered Marmaros granitic plutons intruded during late Oligocene (26 Ma) into the deposits of the Karaa?aç Formation in Gökçeada Island. LA-ICP-MS dating of U and Pb isotopes on zircon separates from the Marmaros rhyolitic rocks yielded a late Oligocene (26 Ma) crystallization age. Geochemical characteristics indicate that the more-evolved Oligocene granitic and rhyolitic rock of the Marmaros Magmatic Assemblage possibly assimilated a greater amount of crustal material than the lower Eocene Harmankaya Volcanic Rocks. Geochemical features and age relationships suggest increasing amounts of crustal contamination and a decreasing subduction signature during the evolution of magmas in NW Turkey from the early Eocene to the Oligocene. The magmatic activity developed following the northward subduction of the ?zmir–Ankara–Erzincan oceanic lithosphere and the earliest Palaeocene final continental collision between the Sakarya and Anatolide–Tauride zones.     

A microseismic experiment in Abu Dhabi,United Arab Emirates: implications for carbonate reservoir monitoring

A microseismic experiment utilizing a single downhole array of eight 3-component receivers was conducted in an offshore oilfield in the emirate of Abu Dhabi in the United Arab Emirates. The Lower Cretaceous Thamama Group is the major carbonate reservoir in the field producing from six zones. Microseismic data was acquired in conjunction with gas injections that took place in the Thamama IV A and IV B reservoirs during 9 days of acquisition. The aim of the experiment was to monitor the microseismic activity arising in the carbonate reservoirs as a result of gas injection. A total of 103 microseismic events were detected from two of the receivers. For the majority of these events, there were no well-defined P wave arrivals, probably due to the presence of strong background noise and the very weak microseismic signals. The results from this experiment indicate that the detected events are probably related to the microseismic activities caused by the gas injection within the Thamama IV B reservoir. Therefore, downhole microseismic monitoring methods can potentially provide valuable information about the fracture systems within the carbonate reservoirs of Abu Dhabi's oilfields.     

Carbonate diagenesis of the upper Jurassic successions in the west of Binalud — Eastern Alborz (NE Iran)

The upper Jurassic carbonate settings in Iran are widely exposed in north and northeastern parts. Five stratigraphic columns were selected in the north eastern Iran. Their thickness ranges from 330 to 500 m. The various diagenetic processes identified include, micritization, cementation, compaction (physical and chemical), dissolution, neomorphism, pyritization, hematitization, silicification and dolomitization, which affected these carbonates. Elemental and stable isotopes analysis indicated that these deposits have undergone both meteoric and burial diagenesis in a relatively open system with moderate water-rock interaction. The positive trend between trace elements and oxygen isotope depletion also support these burial conditions. Lighter δ^l8O values of the dolomite samples may be related to an increase in temperature during the burial, which correspond to coarser euhedral crystals. Relatively higher δ¹⁸O values in finer dolomite crystals indicate their formation at lower burial depths relative to coarser crystals. Petrographic evidences such as coarse euhedral crystals with bright and dull zonation prove this interpretation. Chert nodules also have lighter ¹⁸O values relative to carbonate host rock, thus indicating the influence of burial diagenetic processes in their formation. The average environmental palaeotemperature was estimated to be 26°C on the basis of oxygen isotope values of less altered lime-mudstones.     

An investigation of the effects of important grouting and rock parameters on the grouting process

Today, grouting is used as an aid in ground improvement in most civil and mining engineering projects. Groutability and grout penetration depth are among the most important issues that are considered in grouting operation. Various parameters such as in-situ stress, pore water pressure, joint geometric and geomechanical characteristics, grout properties (viscosity and yield stress) and technical factors such as grouting pressure and flow rate affect the groutability and grout penetration depth in a jointed rock mass. Knowledge of the effect of these parameters has advantages in the prediction of grouting results. Typically, cement-based grout is used in jointed rock masses. Unlike water, stable cement-based grout usually acts as a Bingham fluid. In this study the effect of important parameters on grouting process in a jointed rock mass was investigated numerically using the DEM method. In the conducted study, the problem geometry represents a horizontal section in a regularly jointed rock mass with two joint sets. The analyses results show that the grout penetration depth and intake increase as joint aperture, normal stiffness and grouting pressure increase and in-situ stress and pore water pressure decrease. Increase in joint spacing does not have any effect on the grout penetration depth but decreases the grout intake. The effect of joint orientation on grouting process is strongly dependent on in-situ stress state. On the other hand, increase in grout yield stress decreases the grout penetration depth and intake, while grout viscosity does not have any effect on maximum grout penetration depth and intake. To further investigate the above mechanisms, the grouting process conducted in Gotvand dam-Iran was simulated numerically.