Improvement of an Extremely Highly Plastic Expansive Clay with Hydrated Lime and Fly Ash

Geotechnical and Geological Engineering - In this study, extremely highly plastic soil samples were collected from clay deposits in the Akyurt district of Ankara (Turkey), near Esenbo?a...     

Hydrochemical characteristics of surface and groundwater and suitability for drinking and agricultural use in the Upper Tigris River Basin,Diyarbakır–Batman,Turkey

Investigations were undertaken into the quality of surface water and groundwater bodies within the Upper Tigris Basin in Turkey to determine their suitability for potable and agricultural use. In the study area, the majority of the groundwater and surface water samples belong to the calcium–magnesium–bicarbonate type (Ca–Mg–HCO₃) or magnesium–calcium–bicarbonate type (Mg–Ca–HCO₃). Chemical analysis of all water samples shows that the mean cation concentrations (in mg/L) were in the order Ca²⁺ > Mg²⁺ > Na⁺ > K⁺ and that of anions are in the order \( \text{HCO}_{3}^{ - } \) > \( \text{SO}_{4}^{2 - } \) > Cl^? > \( \text{CO}_{3}^{ - } \) for all groundwater and surface water samples. The Mg²⁺/Ca²⁺ ratio ranges from 0.21 to 1.30 with most of the values greater than 0.5, indicating that weathering of dolomites is dominant in groundwater. The analysis reveals that all of the samples are neutral to slightly alkaline (pH 7.0–8.7). Groundwater and surface water suitability for drinking usage was evaluated according to the World Health Organization and Turkish Standards (TSE-266) and suggests that most of the samples are suitable for drinking. Various determinants such as sodium absorption ratio, percent sodium (Na %), residual sodium carbonate and soluble sodium percentage revealed that most of the samples are suitable for irrigation. According to MH values, all of the well water samples were suitable for irrigation purposes, but 80 and 81.82% of Zillek springs and surface water samples were unsuitable. As per the PI values, the water samples from the study area are classified as Class I and Class II and are considered to be suitable for irrigation.     

Effect of salt crystallization on weathering of pyroclastic rocks from Cappadocia,Turkey

Salt crystallization is the most significant factor in the degradation of the natural stones used in cultural and historical structures. Stones decay partially or fully as a result of this exposure. This study is the investigation of the degradation of historical monuments (underground cities and semi-underground settlements) carved in pyroclastic rocks in Cappadocian Region which takes part in World Cultural Heritage List. Samples of pyroclastic rocks were collected from six different quarries in Cappadocia, Turkey. To understand the contribution of salt crystallization to this weathering, dry weight loss (DWL) tests were performed on these samples. To investigate the correlations between salt crystallization and other rock properties, porosity, water absorption, ultrasonic velocity, uniaxial compressive strength, Brazilian tensile strength, and point load index were also measured. During the SC process of weathering, the results showed that porosity and water absorption increased for all the samples whereas ultrasonic velocity, uniaxial compressive strength, tensile strength, and point load index values decreased. Evaluation of the data obtained from these tests showed very high logarithmic correlations between the dry weight loss values and the mechanical properties.     

Direct use of peak ground motion parameters for the estimation of inelastic displacement ratio of SDOF systems subjected to repeated far fault ground motions

This study is aimed at developing statistical equations to estimate the inelastic displacement ratio of singledegree- of-freedom systems subjected to far fault repeated earthquakes. In the study, peak ground motion parameters are used to define the scatter of the original data. The ratio of peak ground acceleration to peak ground velocity, and peak ground velocity of the ground motion records and structural parameters such as period of vibration and lateral strength ratio are used in the proposed equations. For the development of the equations, nonlinear time history analyses of single-degree-offreedom systems are conducted. Then, the results are used in a multivariate regression procedure. The equations are verified by comparing the estimated results with the calculated results. The average error and coefficient of variation of the proposed equations are presented. The analyses results revealed that the direct use of peak ground motion parameters for the estimation of inelastic displacement ratio significantly reduced the scatter in the original data and yielded accurate results. From the comparative results it is also observed that results obtained using equations specific to peak ground velocity or peak ground acceleration to peak ground velocity ratio are similar.     

Seismotectonic database of Turkey

Turkey is located in one of the most seismically active regions in the world. Characterizing seismic source zones in this region requires evaluation and integration of geological, geophysical, seismological and geodetical data. This first seismotectonic database for Turkey presented herein was prepared, under the framework of the National Earthquake Strategy and Action Plan—2023. The geographic information system (GIS)-based database includes maps of active faults, catalogues of instrumental and historical earthquakes, moment tensor solutions and data on crustal thickness. On the basis of these data, 18 major seismotectonic zones were delineated for Turkey and the surrounding region. The compilation and storage of the seismotectonic data sets in a digital GIS will allow analyses and systematic updates as new data accrete over time.     

A probabilistic seismic hazard assessment for the Turkish territory: part II—fault source and background seismicity model

Over the years, several local and regional seismic hazard studies have been conducted for the estimation of the seismic hazard in Turkey using different statistical processing tools for instrumental and historical earthquake data and modeling the geologic and tectonic characteristics of the region. Recently developed techniques, increased knowledge and improved databases brought the necessity to review the national active fault database and the compiled earthquake catalogue for the development of a national earthquake hazard map. A national earthquake strategy and action plan were conceived and accordingly with the collaboration of the several institutions and expert researchers, the Revision of Turkish Seismic Hazard Map Project (UDAP-Ç-13-06) was initiated, and finalized at the end of 2014. The scope of the project was confined to the revision of current national seismic hazard map, using the state of the art technologies and knowledge of the active fault, earthquake database, and ground motion prediction equations. The following two seismic source zonation models are developed for the probabilistic earthquake hazard analysis: (1) Area source model, (2) Fault and spatial smoothing seismic source model (FSBCK). In this study, we focus on the development and the characterization of the Fault Source model, the background spatially smoothed seismicity model and intrinsic uncertainty on the earthquake occurrence-rates-estimation. Finally, PSHA results obtained from the fault and spatial smoothed seismic source model are presented for 43, 72, 475 and 2475 years return periods (corresponding to 69, 50, 10, and 2% probability of exceedance in 50 years) for PGA and 5% damped spectral accelerations at 0.2 and 1.0 s.     

Seismic hazard map of the Middle East

The collaborative project Earthquake Model of the Middle East (EMME, 2010–2015) brought together scientists and engineers from the leading research institutions in the region and delivered state-of-the-art seismic hazard assessment covering Afghanistan, Armenia, Azerbaijan, Cyprus, Georgia, Iran, Iraq, Jordan, Lebanon, Palestine, Pakistan, Syria and Turkey. Their efforts have been materialized in the first homogenized seismic hazard model comprising earthquake catalogues, mapped active faults, strong motions databank, ground motion models and the estimated ground motion values for various intensity measure types and relevant return periods (e.g. 475–5000 years). The reference seismic hazard map of the Middle East, depicts the mean values of peak ground acceleration with a 10% chance of exceedance in 50 years, corresponding to a mean return period of 475 years. A full resolution poster is provided with this contribution.     

Mathematical modelling of a potential tsunami associated with a late glacial submarine landslide in the Sea of Marmara

Potential tsunami waves were modelled on the basis of the morphology and geological setting of a late glacial submarine landslide localized in the north-eastern sector of the Sea of Marmara, using a three-dimensional algorithm with the purpose of assessing the future risk of tsunamogenic landslides in the region. The landslide occurred off the Tuzla Peninsula on the north-eastern slope of the Ç?narc?k Basin, the easternmost of the three deep Marmara basins. The mass movement appears to be related to the Main Marmara Fault that passes below the toe of the failed mass. Observations from earlier manned submersible dives suggest that the initiation of the slide was facilitated by secondary faults associated with the Hercynian orogeny and involved Palaeozoic shales dipping southwards towards the deep basin. Radiocarbon dating of core material, together with the well-dated Marmara sapropel above the chaotically mixed landslide surface, reveal that the latest landslide event occurred about 17 ¹⁴C ka b.p. The uppermost scar of the landslide is found at 250 m and its toe at about 1,200 m below the present sea level. At the time of the slide, the Marmara Sea Basin was lacustrine, with its water level at ?85 m. In plan view the landslide has a distinctively triangular shape and the lateral extent of its toe is about 10 km. Multibeam bathymetric data indicate that the sliding motion probably occurred in two phases: a slower phase affecting the eastern part, characterized by an undulating surface, and a more rapid phase affecting the western part that possibly created tsunami waves. In the seismic sections, older failed slide masses can be clearly identified; these were probably displaced during marine isotopic stage 6 (～127–160 ka b.p.). The front of this buried material is located more than 1.5 km further south of the fault. We used a three-dimensional, Green’s function-based potential theory approach, rather than shallow-water equations commonly used in conventional tsunami simulations. The solution algorithm is based on a source-sink formulation and an integral equation. The results indicate that the maximum height of the tsunami in the Ç?narc?k Basin could have reached about half the average thickness of the sliding mass over a lateral extent of 7 km. Assuming an average thickness of 30 m for the landslide, and considering that the water level at 17 ka b.p. was at about ?85 m, the modelling shows that the maximum wave height generated by the slide would have been about 15–17 m.     

Simulation of a 3D submerged jet flow around a pile

The submerged 3D turbulent jet flow behavior around a pile on a rigid bed and on a scoured bed was studied experimentally and numerically. ADV was used to obtain the jet velocity distributions and Realizable k–ε turbulence model was used for the prediction of flow field around a pile. The jet flow area was three-dimensional and thus numerical model was a three-dimensional model. The numerical results were used to predict the velocity close to the pile and bed shear stress on the bed. In general, the results indicated that the flow field was also in agreement with the findings of previous experiments in literature and the related principles in the subject area. The experimental results demonstrated that Acoustic Doppler Velocimeter (ADV) measurements were almost identical with the Realizable k–ε turbulence model results for turbulence intensity I=10%.     

An Assessment of the Spatial Distribution of Polychlorinated Biphenyl Contamination in Turkey

This study summarizes the relevant information regarding the spatial distribution of polychlorinated biphenyls (PCBs) in various environmental (e. g., soil, sediment, air, water) and biological (e. g., fish, mussel, adipose tissue, milk) media in Turkey. The information sources used for this purpose, in addition to the scientific literature, were; official import records, governmental reports on monitoring of organochlorines, and reports prepared by international organizations. PCBs were never produced in Turkey; however they were imported and used within equipment or otherwise. The number of studies conducted on the topic is increasing significantly throughout the years and especially in the last decade. Evidence of PCB pollution was compared with the available background monitoring results from the region and other parts of the world, as well as relevant legislative standards. Overall, the presence of a number of important local PCB contamination sources is indicated as a result of this assessment.