Geotechnical investigations and remediation design for failure of tunnel portal section: a case study in northern Turkey

Mass movements are very common problems in the eastern Black Sea region of Turkey due to its climate conditions, geological, and geomorphological characteristics. High slope angle, weathering, dense rainfalls, and anthropogenic impacts are generally reported as the most important triggering factors in the region. Following the portal slope excavations in the entrance section of Cankurtaran tunnel, located in the region, where the highly weathered andesitic tuff crops out, a circular toe failure occurred. The main target of the present study is to investigate the causes and occurrence mechanism of this failure and to determine the feasible remedial measures against it using finite element method (FEM) in four stages. These stages are slope stability analyses for pre- and postexcavation cases, and remediation design assessments for slope and tunnel. The results of the FEM-SSR analyses indicated that the insufficient initial support design and weathering of the andesitic tuffs are the main factors that caused the portal failure. After installing a rock retaining wall with jet grout columns and reinforced slope benching applications, the factor of safety increased from 0.83 to 2.80. In addition to slope stability evaluation, the Rock Mass Rating (RMR), Rock Mass Quality (Q) and New Austrian Tunneling Method (NATM) systems were also utilized as empirical methods to characterize the tunnel ground and to determine the tunnel support design. The performance of the suggested empirical support design, induced stress distributions and deformations were analyzed by means of numerical modelling. Finally, it was concluded that the recommended stabilization technique was essential for the dynamic long-term stability and prevents the effects of failure. Additionally, the FEM method gives useful and reasonably reliable results in evaluating the stability of cut slopes and tunnels excavated both in continuous and discontinuous rock masses.     

Influences of human activities and agriculture on groundwater quality of Kayseri-Incesu-Dokuzpınar springs,central Anatolian part of Turkey

Human activities and agriculture have had direct and indirect effects on the rates of contamination of groundwater in the Incesu-Dokuzp inar spring area. Direct effects include dissolution and transport of excess quantities of fertilizers with associated materials and hydrological alterations related to irrigation and drainage. Indirect effects may include changes in water–rock reactions in soils and aquifers caused by increased concentrations of dissolved oxidants, protons, and major ions. Agricultural activities have directly or indirectly affected the concentrations of a large number of inorganic chemicals in groundwater, for example NO ₃, N ₂, Cl, SO ₄ ², H ⁺, K, Mg, Ca, Fe, Cu, B, Pb, and Zn, as well as a wide variety of pesticides and other organic compounds. For reactive contaminants like NO ₃, it is recommended that a combination of hydrochemical and environmental-tracer analytical approaches might be required to resolve changing inputs from subsequent alterations as causes of concentration gradients in groundwater. The water type of Dokuzp inar springs is mainly Na–Mg–Ca–Cl–HCO ₃. Note that the water types of the springs were directly related to the hydrogeochemical properties of outcrops at the study area. Thus, the high concentration of Ca ²⁺ and HCO ₃ is mainly related to the high CO ₂ contents in the marbles, whereas the high Na concentration arises from the existing syenite, volcanic ash, basalt, and clay units, although the Incesu-Dokuzp inar springs cover most of the drinking and irrigation water demands of this area. The high concentrations of NO ₃ and NaCl show that the area around the springs is continuously being contaminated by untreated sewage and agricultural wastes, especially during dry periods. Therefore, this approach is based on the vulnerability studies of the catchment area, determination of the transfer time of the pollutant, and the water-bearing formations of Incesu-Dokuzp inar springs. Vulnerability in this study is defined as the intrinsic hydrogeochemical characteristics of an aquifer, which may show the sensitivity of groundwater to be contaminated by different human activities.     

On the geothermal regime of some tectonic units in Romania

Heat flow values of 33–58 mW m^–2 were found for the Transylvanian Depression, 45–57 mW m^–2 for the crystalline nucleus of the Eastern Carpathians, and 70–120 mW m^–2 for the Neogene volcanic area. Temperature-depth profile and some geophysical implications of the low values for the Transylvanian Depression are discussed, rendering evident clear-cut differences between this tectonic unit and other Noegene depressions. The heat flow values for the other two investigated tectonic units are usual ones for areas of their age.A preliminary map of the heat flow distribution over the Romanian territory is presented and its relation to other geophysical fields is discussed. A positive correlation was found between gravity and heat flow, and a negative one between crustal thickness and heat flow. A general conclusion could be drawn that the heat flow distribution over the Romanian territory seems to be governed by processes taking place in the upper mantle, rather than by the radioactive decay within the crust.     

The lunar tide in theE-layer above Istanbul

Summary The lunar tide in theE-layer of the ionosphere above Istanbul has been determined by the analysis of thefo E parameter from 1964–1967. Semi-diurnal variations were found to be significant. The seasonal and monthly variations of the amplitude and phase of the lunar tide show very little differences.     

Some aspects of the secular variation of the geomagnetic elements H,Z and F between 1958–1974 in Romania

The paper presents some results concerning the secular variation of H, Z and F in Romania between 1958–1974. Curves of the variation of , Z and F at 31 repeat stations are given. The effect of solar activity on the horizontal component is separated and its characteristics discussed. For the interval 1969.5–1974.5 maps of the smoothed secular variation of H, Z and F are given, with isopores described by curves of second degree with respect to the geographical coordinates.     

Ilvait in den polymetamorphen Eisenerzen der Poiana Ruscă (Rumänien)

Zusammenfassung Ilvait wurde in den polymetamorphen Eisenerzen von Ruschita als Rekristallisationsprodukt einer hochtemperierten banatitischen Kontaktmetamorphose mit Siliziumzufuhr in Magnetitskarnen, die aus regionalmetamorphen, ursprünglich vulkanogen-(magmatogen-)sedimentären Eisenkarbonaterzen gebildet wurden, aufgefunden.

---

Ilvaite in polymetamorphic iron ores from Poiana Rusc (Romania)

Summary Ilvaite has been identified in the polymetamorphic iron ores from Ruschita as a recrystallization product of the banatitic contact metamorphism with increase in Si-content. Ilvaite occurs in magnetite scarnes formed from regional metamorphic volcanic-sedimentary iron carbonate ores.

     

Performance-based landfill design: development of a design component selection matrix using GIS and system simulation models

Designing environmentally safe and economically feasible landfills can be a challenging task due to complex interactions that need to be taken into account between landfill size, waste and site characteristics. The main focus of this study is, by interfacing the geographic information systems (GIS) with system simulation models (SSM), to develop a methodology and a landfill design component selection matrix that can enable the determination of landfill design components providing the desired performance with minimal design details. In this paper, the conceptual framework and applications of the developed methodology demonstrating the selection of landfill design components that are suitable for the existing site conditions are presented. The conceptual model defines design variables, performance criteria and design components of a landfill. GIS and SSM are used to handle the site-specific data and to evaluate the landfill performance, respectively. Results indicate that the landfills having the same design characteristics show different performance under different site conditions; therefore, a landfill design that is technically and economically feasible should be selected on the basis of performance.     

Hydrochemical evolution and water quality along the groundwater flow path in the Sandıklı plain, Afyon, Turkey

 An unconfined aquifer system suggests an open system in the study area. Hydrochemical evolution is related to the flow path of groundwater. The groundwaters are divided into two hydrochemical facies in the study area, 1) Ca–Mg–HCO₃ and 2) Ca–Mg–SO₄HCO₃. Facies 1 has shallow (young) waters which dominate in recharge areas during rapid flow conditions, whereas facies 2 may show shallow and mixed waters which dominate intermediate or discharge areas during low flow conditions. Ionic concentrations, TDS, EC and water quality are related to groundwater residence time and groundwater types. The groundwaters in the plain are chemically potable and suitable for both domestic and agricultural purposes. Received: 20 May 1996 · Accepted: 30 July 1996     

Characteristics of the secular variation of the geomagnetic field between 1964–1981 in Romania

The variation of the H, Z, and T components of the geomagnetic field at repeat stations on Romanian territory between 1964 and 1981 is discussed in terms of internal secular and solar cycle related variations. Their geographical distribution is accounted for by the magnetic and electric structure of the interior of the Earth. The effects of magnetic and electromagnetic induction caused by the solar cycle related variation were evaluated.     

Application of electrical resistivity tomography technique for investigation of landslides: a case from Turkey

Electrical resistivity imaging is a widely used tool in near surface geophysical surveys for investigation of various geological, environmental and engineering problems including landslide. In this study, an electrical resistivity tomography (ERT) survey was conducted in a landslide area, located in the Söke district of Aydın, Turkey. In 2003, the Neogene-aged units on the slope next to a newly built school building became unstable due to an excavation work and moved after a heavy rainfall. The resulting landslide partly covered the school. The authors carried out a 2-D resistivity survey along three profiles over the landslide mass using a Wenner configuration. It yielded useful information about the geometry and characteristics of the landslide. In addition, a 2-D synthetic resistivity modelling study was carried out to understand the response of the resistivity method to a landslide problem before the field surveys. Eight boreholes were also drilled in the landslide area. Both the drilling and resistivity results indicated the presence of a fault in the site. Also, the resistivity data from the line measured along the axis of the landslide revealed the surface of rupture.