A model for the constant-head pumping test conducted in vertically fractured media

An analytical model for the constant-head pumping test is developed for a partially penetrating well that has a finite thickness skin, and intersects a single vertical fracture. In the model, the fracture is fully confined and flow occurs only in the fracture. The model is developed using Laplace transform and finite Fourier transform methods. The model is to be used for analysing well test data from vertically fractured media and for verifying numerical models. Dimensionless curves are used to study the effects of a finite thickness skin and a partially penetrating wellbore. In the presence of a finite thickness skin, or a partially penetrating wellbore, a typical flow response for the constant-head pumping test has three distinct periods of flow corresponding to small-, intermediate- and large-time. Small- and large-time approximations are presented for the model. For tests where the wellbore is fully penetrating, or the partial penetration ratio is known, these approximations can be used to analyse field data.     

Drumlin formation in Southern Anglesey and Arvon,Northwest Wales

This is a study of Late Devensian drumlins formed in southern Anglesey and Arvon, northwest Wales. This area was affected by ice sheet coalescence when the Welsh ice sheet met with the lrish Sea ice sheet, and drumlins were formed once the two had coalesced. It is suggested that the drumlins were the result of net subglacial soft-bed erosion, and that they represent more resistant cores within the subglacial deforming layer. The drumlins have either gravel or till cores, and where the core was deformable, large-scale compressive glaciotectonic structures were seen (e.g. Dinas Dinlle) with local subglacial compression of –59%. Where the cores were more resistant (e.g. Lleiniog) these were not deformed but remained as more competent masses within the deforming layer. It is suggested that the less competent material flowed around the cores, some remaining as a thin carapace, but most of the material being removed down glacier, leaving the drumlins as erosional remnants. In northwest Wales there is a multi-till sequence that traditionally has been interpreted as having been deposited as the result of separate ice-sheet advances and retreats. However, in this study, it is suggested that the different tills were deposited as the result of ice-sheet coalescence, and that sites such as Dinas Dinlle do not show evidence of a major readvance in the retreat of the Devensian ice, but are indicative of continuously changing conditions within the subglacial deforming bed.     

Silica phase transformations in the petroliferous sequences

The joint evolution of organic matter and silica in petroliferous sequences is considered in the terms of the laws of transformation of dispersion systems. The dispersion systems are transformed under conditions of low-temperature solid-phase processes accompanied by the silica phase transition and dehydration that favors the evolution of organic matter.     

The wadic project: A comprehensive field evaluation of directional wave instrumentation

The results of a comprehensive field trial of nearly all commercially available directional wave measurement systems at the Edda field in the North Sea during winter 1985-86 are presented. The results summarize the accuracy of the principal engineering wave parameters from each system and the dependence on sea state. Limiting factors on system performance and operational problems are also included in the assessment. Overall experience has been good with systems utilizing widely different measurement principles returning consistent results.     

Heat flow near obstacles in the solar convection zone

Disturbances in the heat flow in the solar convection zone are calculated with a turbulent thermal diffusion coefficient based on a mixing length approximation. As a consequence of the radiative boundary condition at the surface and the strong increase of the diffusion coefficient with depth, the convection zone resembles a thermally superconducting shell enclosed between a thin surface layer and an interior core of low thermal conductivity. Thermal disturbances originating in the convection zone do not penetrate into the interior, and penetrate only weakly through the solar surface. A thermally isolating obstacle buried entirely in the convection zone casts a shadow of reduced temperature at the solar surface; the brightening surrounding this shadow is undetectable. The shadow is weak unless the object is located close to the surface (less than 2000 km). Assuming a sunspot to be an area of reduced thermal conductivity which extends a finite depth into the convection zone, the heat flow around this obstacle is calculated. The heat flux blocked below the spot (missing flux) spreads over a very extended area surrounding the spot. The brightening corresponding to this missing flux is undetectable if the reduction of the thermal conductivity extends to a depth greater than 1000 km. It is concluded that no effect other than a decrease of the convective efficiency is needed to explain the temperature change observed at the solar surface in and around a sunspot. The energy balance is calculated between magnetic flux tubes, oriented vertically in the solar surface, (magnetic elements in active regions and the quiet network) and their surroundings. Near the visible surface radiation enters the tube laterally from the surrounding convection zone. The heating effect of this influx is important for small tubes (less than a few arcseconds). Due to this influx tubes less than about 1 in diameter can appear as bright structures irrespective of the amount of heat conveyed along the tube itself. Through the lateral influx, small tubes such as are found in the quiet network act as little leaks in the solar surface through which an excess heat flux escapes from the convection zone.     

Diffusion-deposition patterns in Martian streaks

The spreading angle of a number of light and dark Martian streaks is determined from selected Mariner 9 images. The resulting frequency distributions of spreading half-angles have maxima at ～5° for light, and ～7° for dark streaks; however the dark streaks have a secondary maximum spreading angle at ～14°. The smaller values, which include most streaks, are interpreted as crater-wake spreading phenomena. The larger value, found in only a few dark streaks or “tails,” may result from atmospheric diffusion and subsequent deposition of material from isolated sources such as vents or blowouts. An atmospheric diffusion-deposition analysis is presented, assuming this streak origin, from which it is possible to deduce the eddy diffusivity, K, in Mars' boudary layer. Calculated K values are found to agree with various theoretical estimates. They lie in the range 10⁷ and 10⁹ cm² sec^?1 and exhibit the proper scale dependence. Thus it appears that, in addition to streak-derived wind direction patterns and speed information, it is possible in a few cases to derive information on Mars' boundary-layer turbulence from streak-spreading measurements.