A Mid Cretaceous origin for the Galápagos hotspot: volcanological, petrological and geochemical evidence from Costa Rican oceanic crustal segments

The Quepos, Nicoya and Herradura oceanic igneous terranes in Costa Rica are conspicuous features of a Mid to Late Cretaceous regional magmatic event that encompasses similar terranes in Central America, Colombia, Ecuador and the Caribbean. The Quepos terrane (66?Ma), which consists of ol-cpx phyric, tholeiitic pillow lavas overlain by highly vesicular hyaloclastites, breccias and conglomerates, is interpreted as an uplifted seamount/ocean island complex. The Nicoya (～90?Ma) and Herradura terranes consist of fault-bounded sequences of sediments, tholeiitic volcanics (pillow lavas and massive sheet flows) and plutonic rocks. The volcanic rocks were emplaced at relatively high eruption rates in moderate to deep water, possibly forming part of an oceanic plateau. Major and trace element data from Nicoya/Herradura tholeiites indicate higher melting temperatures than inferred for normal mid-ocean-ridge basalts (MORB) and/or a different source composition. Sr–Nd–Pb isotopic ratios from all three terranes are distinct from MORB but resemble those from the Galápagos hotspot. The volcanological, petrological and geochemical data from Costa Rican volcanic terranes, combined with published age data, paleomagnetic results and plate tectonic reconstructions of this region, provide strong evidence for a Mid Cretaceous (～90Ma) age for the Galápagos hotspot, making it one of the oldest known, active hotspots on Earth. Our results also support an origin of the Caribbean Plate through melting of the head of the Galápagos starting plume.     

210Pb balance in Long Island Sound

A material balance is constructed for excess ²¹⁰Pb (relative to ²²⁶Ra) as a test of the retentivity of Long Island Sound for a reactive heavy metal. Excess ²¹⁰Pb is supplied to Long Island Sound chiefly by direct atmospheric deposition [1 ± 0.2(dis·min^?1)cm^?2·yr^?1]. Rivers supply less than 20% of the atmospheric flux, and other inputs, from open ocean waters, ²²⁶Ra decay, groundwater seepage, and sewage discharge, appear to be negligible. The total input of excess ²¹⁰Pb represents approximately the flux required to maintain the inventory of excess ²¹⁰Pb measured in sediment cores from central Long Island Sound; that is, excess ²¹⁰Pb is lost from Long Island Sound chiefly by radioactive decay. The retention of excess ²¹⁰Pb within Long Island Sound is achieved in two steps: a rapid removal of soluble ²¹⁰Pb onto suspended particles and the ongoing entrapment of particles in the basin by the residual bottom-water influx from the east.     

Ferroan calcite replacement indicates former magnesian calcite skeletons

The replacement by ferroan calcite with preservation of the original structures can be used as a new criterion for identifying skeletons originally composed of high-magnesian calcite. This applies to bryozoa, rugose corals, echinoderms, many foraminifera, most ostracods, red algae, and serpulids. On the other hand, skeletons originally composed of low-magnesian calcite were never replaced by ferroan calcite, as shown by belemnites, brachiopods, and most of the pelecypods. Using this criterion, an original low-magnesian calcite composition is inferred for Tentaculites and some ostracods and foraminifera, whereas a previous high-magnesian calcite composition is inferred for trilobites, oligostegina and certain ooids. Chemical instability of high-magnesian calcite is suggested to be the driving force of the replacement by ferroan calcite. In most of the thirty-seven samples investigated, of Oligocene to Devonian age, the ferrous iron concentration of the interstitial fluid increased during diagenesis, as shown by well established sequences of cement A and B and fissure fill. This offers a relative time scale for diagenetic processes. Ferroan calcites contain up to 6 mol % FeCO₃ and up to 5 mol % MgCO₃. In this range of concentration, the distribution coefficients for Fe and Mg between calcite and solution at about 25°C are about 1 to 0-03, respectively, according to experiments. Possible sources of iron are iron oxides and hydroxides as well as clay minerals including glauconite. Though a submarine origin below the sediment surface is conceivable for ferroan calcite, there are serious limiting conditions such as low Eh and, at the same time, lack in sulphate-reducing bacteria. On the other hand, ferroan ‘dedolomite’, compositional zonality in individual ferroan calcite overgrowths, low δ¹⁸C and δ¹⁸O values, and low Mg concentrations point more to a meteoric-phreatic origin of many ferroan calcite occurrences.     

On the variability of the position of the equatorial electrojet axis in India

An examination of day-to-day and monthly mean positions of the electrojet axis in relation to the changes in the apparent solar declination, in the Indian equatorial region shows marked association between the two. For relatively quiet days, significant correlations are observed between the solar declination and each of the parameters, the northernSq focal latitude, the jet axis and the line of maximumSq(H). From the significant mutual association of these parameters, it has been suggested that the equatorial electrojet could be a part of the world-wideSq current system.     

岩浆型磷灰石结构四面体替换特征的标型意义

根据文献中列了的５６个产于碳酸岩－碱性岩磷灰石的成分数据，讨论了这些岩浆型磷灰石结构四面体替换特征的标型意义，并定义出四面体替换指数，（ＴＳＩ＝（Ｓｉ＋ＳＣ）／Ｐ，单位晶胞原子数百分比），以区别侵入相碳酸岩磷灰石，喷发相碳酸岩磷灰石和碱性岩磷灰石：ＩＡＰ的ＴＳＩ为０－６．９，平均３．６２，仅少量Ｃ进入Ｔ位置；     

Religious pattern of India with a factoral regionalization

Though over four-fifths of Indian population is Hindu, there are sizeable numbers of other religious groups: Muslim, Christian, Sikh, Buddhist, Jain and other religion (mainly aboriginal animists). Hindus are spread out all over the country with declining or negligible concentration at the southern, northeastern and northwestern parts of the country. Sikhs are concentrated in Punjab; Muslims have majority in the northwestern Kashmir and Lakhadweep; Buddhists compose over 50% population in Western Kashmir, immediately south of it and Sikkim; Mixed religious areas are in the northeastern and southwestern tip of the country. By applying factor analysis technique it is possible to delineate religious regions of India with five major classes: Mainly Hindu, Muslim, Sikh, Buddhist and Mixed. There are several pockets where Hindus form the main religious group, but Muslims, Christians and others are secondary.     

湖南沃溪金锑钨矿床稀土元素特征研究

对湖南活溪金锑钨矿床稀土元素特征的研究结果表明：在成矿过程中,稀土元素发生了从近矿围岩向含矿断裂带或成矿热液的迁移;成矿物质主要来自赋矿地层围岩,且具多源性;矿化程度不同的层脉石英矿石中的稀土总量具有明显的差异。同时指出了将热液金矿床中石英脉内稀土总含量作为找矿标志的可能性。     

兴隆庄煤矿3煤顶板岩层富水性分区

分析了矿井顶板水害及防治现状,以兴隆庄煤矿４３１８工作面为例,用信息拟合方法对顶板富水性进行分区,应用模糊评判预测方法进行了顶板水量预测计算：涌水量等级为３级,正常涌水量为０．５～１．５ｍ＾３／ｍｉｎ,最大涌水量为２．２５ｍ＾３／ｍｉｎ,与实际涌水量一致。     

上部地壳的流体作用与大理岩的低温塑性

本文应用光学显微镜、透射电子显微镜和阴极发光显微镜系统研究了Ｗａｔｅｒｂｅｒｇ断层带（纳米比亚）内粗晶大理岩中发育的构造岩,宏观碎裂结构与微观糜棱装结构是断层构造岩的主要特点。巨大的孪形碎屑与弥漫的细小粒质形成了鲜明的反差,广泛发育的压溶颖合线与多阶段方解石细脉遍布构造带不同部位,ＴＥＭ亚微粒粒度具有简单的峰值分布（～０．３～０．４μｍ）,但动态重结晶颗粒的粒度却具有较大的变化范围（０．１～３．０     

Fresh-water lenses and practical limitations of their three-dimensional simulation

Fresh-water lenses are the major sources of water supply in many atoll islands in the Pacific and Indian Oceans, particularly in dry seasons. Several two- and three-dimensional models are currently available for the simulation of atoll-island aquifers; however, 2D models cannot include 3D spatial variability of material properties, they must simplify the boundary conditions, and they cannot correctly simulate pumping wells. In an attempt to overcome these difficulties, a 3D model, SALTFLOW, was adopted for the simulation of Home Island in the Indian Ocean. This exercise required a discretisation on the order of a few metres and time steps of a few hours requiring significantly high CPU times. High CPU demand proved to be a difficult challenge but cannot be considered a serious practical limitation with today's advanced computers. The exhaustive data demands of the model (e.g., 3D distributions of hydraulic conductivity, porosity, dispersivities, and spatial and temporal variations of recharge and extraction rates) proved to be more problematical. Although the Home Island data set is unusually comprehensive by any standards, nonetheless the quality and quantity of the available data proved inadequate to meet the calibration needs of a highly karstic aquifer system. The Home Island modeling demonstrates the practical limitations of 3D models. It raises the concern that our ability to develop computer codes capable of simulating complex systems now exceeds our ability to supply the input data necessary for reliable calibration. Finally, the paper demonstrates the importance of the transient calibration in reliable simulation of various management options and emphasises that transient calibration should be considered as an integral part of any similar 2D or 3D modeling. Electronic Publication