Recovery of groundwater in the Sanriku region contaminated by the tsunami inundation from the 2011 Tohoku earthquake

Many wells in the Sanriku region used as sources for water supply systems were heavily contaminated by the tsunami of the 2011 great Tohoku earthquake on March 11 in 2011. To better understand the nature of the groundwater contamination by the tsunami inundation and to clarify the recovery process of contaminated groundwater at the study wells, groundwater monitoring has been conducted once or twice yearly since early summer in 2011. High and abnormal values of electric conductivity (EC), chloride ion concentration (CIC), Na⁺, Ca⁺, heavy metal ions, and heavier isotopes of the contaminated groundwater were also obtained in April and June 2011. The chemical elements have rapidly and exponentially decreased as a result of effective pumping of the contaminated groundwater from the study wells and because of abundant rainfall in 2011. In April 2015 (about 4 years after the tsunami inundation), the CIC and EC of the contaminated groundwater of two study wells in Minamisanriku town had reached pre-inundation values. The estimated residence times of groundwater of the two study wells were 105–118 days in the full-day pumping stage and 910–1000 days in the daytime-only pumping stage.     

地铁暗挖施工引起的管线与地层沉降关系研究

依托北京地铁4号线公益西桥站工程,建立结构-地层-管线三维弹塑性数值模型,基于管线周边地层沉降及地表沉降实测数据分析,研究西南出入口暗挖施工上方管线周边地层变形规律。通过现场实测数据、数值模拟及经验公式计算结果综合对比,分析了管线刚度对地层变形抵制作用的影响。研究表明：管土相对刚度小于0.18时,管线与土体沉降差小于5%,可用经验公式计算出的管线轴线处地层沉降代替管线沉降。随管线刚度的增大,管线对土体变形的抑制作用逐渐增强,沿深度方向地层沉降量增大速率减小,并会出现负增长,甚至出现地层沉降小于地表沉降的情况。通过对数值计算结果的拟合分析,提出了刚性接头管线与地表沉降比和管土相对刚度的经验公式。工程实例应用结果表明,计算值与实测值偏差小于4%,验证了该方法的适用性。     

内蒙古道伦达坝铜钨多金属矿黑云母花岗岩年代学、地球化学特征及其地质意义

内蒙古道伦达坝铜钨多金属矿是大兴安岭南段近年来新发现的一个铜、钨、锡共生的多金属矿床,成矿与中粗粒黑云母花岗岩密切相关,但其形成时代还存在较大争议,对岩浆来源缺乏足够的研究。本文对道伦达坝矿床内黑云母花岗岩进行了系统的岩石地球化学、年代学、Hf-Pb同位素地球化学组成测试。道伦达坝黑云母花岗岩SiO2含量为65.42%～67.41%,富铝、钾,A/NCK值为1.08～1.27,CIPW标准矿物刚玉含量较高(1.82%～4.08%),岩石属于过铝质S型花岗岩。微量、稀土元素组成表现出的轻稀土富集、重稀土亏损型式和Eu负异常以及明显的Nb、Ta、Sr、Ti亏损的特点显示为壳源成因的火山弧花岗岩。LA-ICP-MS锆石U-Pb测年结果表明其形成年龄为292.1±0.84Ma(MSWD=1.18)～292.5±0.88Ma(MSWD=0.46)。Hf同位素测试结果显示,道伦达坝黑云母花岗岩的εHf(t)=-0.8～+13.3,176Hf/177Hf比值(0.282643～0.282804)偏低,二阶段Hf同位素模式年龄较高(740～1024Ma)。全岩Pb同位素组成较均一,206Pb/204Pb介于18.416～18.766,207Pb/204Pb介于15.519～15.542,208Pb/204Pb变化在38.238～39.460。黑云母花岗岩为早二叠世西伯利亚板块南缘俯冲增生背景下的产物,主要源自从亏损地幔新增生的年轻地壳物质的部分重熔,在侵位过程中可能受到了残留的古地壳或岩石圈地幔的混染。古生代是兴蒙造山带的一个重要的成矿阶段,矿化以岛弧或活动大陆边缘背景下的斑岩-矽卡岩-热液脉型铜钼金多金属矿床为主。     

基于WebGIS的民勤绿洲生态预警信息系统设计研究

结合WebGIS框架,对民勤绿洲生态预警信息系统的结构、功能进行了总体设计,提出了基于B／S和C／S结构相结合的分布式Web系统框架,并阐述了保证系统数据和操作安全的关键技术,不但使系统在Web开放式环境下高级别数据得到安全存储管理,而且还保证了基础数据的共享性和可操作性,为民勤绿洲生态问题的解决提供支持。     

世界海洋油气资源与勘探模式概述

描述了全球海洋油气储量的总体情况、海洋油气资源的地域分布以及海洋油气产量的状况与增长趋势。简略阐述了海洋油气勘探的阶段划分、海洋地质调查、海洋地球化学勘探、海洋非地震地球物理勘探以及海洋地震勘探各方法的基本特点、关键技术和常用手段等。对海洋油气勘探的前景,尤其是深水区和天然气水合物的勘探前景作了展望。     

中尺度模式中不同对流参数化方案的比较试验

MM5模式中有多种积云参数化方案可供选择,粗细网格采用不同的积云参数化方案对降水预报有一定的影响。采用常用的四种积云参数化方案,粗细网格进行不同配置,对辽东半岛大暴雨过程进行试验发现：细网格信息可以通过嵌套边界向外层传递,影响外层预报结果。细网格选取GR方案比选取AK、BM、KF方案模拟效果好很多;细网格参数化方案不变,粗网格取不同的参数化方案,对细网格的模拟结果差别不大。但选取一个好的参数化方案对细网格的模拟结果会稍有改进。     

基于经验模态分解的分数维地震随机噪声衰减方法

经验模态分解算法（EMD）是一种基于有效波和噪声尺度差异进行波场分离的随机噪声压制方法,但由于实际地震数据波场复杂,导致模态混叠较严重,仅凭该方法进行去噪很难达到理想效果.本文基于EMD算法对信号多尺度的分解特性,结合Hausdorff维数约束条件,提出一种用于地震随机噪声衰减的新方法.首先对地震数据进行EMD自适应分解,得到一系列具有不同尺度的、分形自相似性的固有模态分量（IMF）;在此基础上,基于有效信号和随机噪声的Hausdorff维数差异,识别混有随机噪声的IMF分量,对该分量进行相关的阈值滤波处理,从而实现有效信号和随机噪声的有效分离.文中从仿真信号试验出发,到模型地震数据和实际地震数据的测试处理,同时与传统的EMD处理结果相对比.结果表明,本文方法对地震随机噪声的衰减有更佳的压制效果.

     

大理岩破坏的声发射双主频特征及其机制初探

因试样制备、试验操作等限制,获得饱和岩石的直接拉伸强度较为困难。为对饱和硬岩的直接拉伸强度进行合理估算并验证其可靠性,同时分析水对估算误差的影响,设计完成了干燥、饱和状态下两种硬岩的单轴压缩和直接拉伸声发射试验。基于Griffith理论和Hoek-Brown(H-B)强度准则,通过裂纹体积应变法确定岩石起裂应力,估算饱和硬岩的直接拉伸强度和H-B强度参数m_i。结合声发射波形信号频谱特性,分析两者估算结果的准确性。结果表明,基于Griffith准则并采用起裂应力估算饱和硬岩的直接拉伸强度是一种较可靠的方法。对于干燥硬岩,该方法确定的直接拉伸强度估算值比试验值偏小。饱和硬岩直接拉伸强度估算值与试验值基本接近,这是因为硬岩饱和后,延性和蠕变趋向增强,并发生更多的微观拉破裂。饱和硬岩的m_i值增大与增多的微观拉破裂有关,m_i值变化可用于描述饱和硬岩的软化程度。基于Griffith准则并采用起裂应力估算的岩石直接拉伸强度和H-B强度参数m_i可用于岩体工程的早期设计。     

Development and verification of the comprehensive model for physical properties of hydrate sediment

Natural gas hydrate is widely distributed all over the world and may be a potential resource in the near future, whereas hydrate dissociation during the development affects wellbore stability and drilling safety. However, the present modeling of hydrate reservoir parameters ignored the influence of effective stress and only considered the hydrate saturation. In this paper, a series of stress sensitivity experiments for the unconsolidated sandstone were carried out, and the influence of mean effective stress on physical parameters was obtained; a comprehensive model for the physical parameters of hydrate reservoir was developed subsequently. With the help of ABAQUS finite element software, the established comprehensive model was verified by the use of the wellbore stability numerical model of hydrate reservoir. The verification results show that ignoring the effect of mean effective stress on the parameters of hydrate formation aggravates the invasion of drilling fluid into the hydrate formation. Besides, ignoring the stress sensitivity of reservoir physical parameters will underestimate the wellbore instability during hydrate drilling, which will be a threat to the safety of gas hydrate drilling. At the end of the drilling operation, the maximum plastic strain of the model for considering and not considering stress sensitivity was 0.0145 and 0.0138, respectively. Therefore, the established comprehensive model will provide a theoretical support for accurately predicting the engineering geological disasters in hydrate development process.