Variability in growth,development and reproduction of the non-native seaweed Sargassum muticum (Phaeophyceae) on the Irish west coast

This study compared seasonal growth, development and reproduction of the invasive brown macroalga Sargassum muticum in habitats with different wave exposure on the Irish west coast. Three field sites with different degrees of wave exposure were chosen for monthly observations to reflect different habitats that were characteristic of the Irish west coast. Growth and receptacle development differed considerably between sites. Growth and receptacle development was lower at the most sheltered site. Here, S. muticum showed signs of early fragmentation in April/May during the two years of investigation (2007 and 2008), whilst the population at an exposed site developed normally and plants grew to a maximum average length of 163 cm by July, with the onset of fragmentation in August. Sargassum muticum in a tide pool exhibited a similar seasonal growth cycle as plants at the exposed open shore site. Overall growth however was stunted, with plants reaching a maximum length of only 30–40 cm in July. Receptacle development was also inhibited at the sheltered site, with a maximum of only 10% of plants found to be fertile during spring and summer 2008, while plants at the exposed site and the tide pool exhibited 100% plant fertility by August. An extensive occurrence of the native epiphyte Pylaiella littoralis on S. muticum was noticed during field sampling at the sheltered study site which may have contributed to inhibited development of S. muticum observed in this area.     

Deep 610-MHz Giant Metrewave Radio Telescope observations of the Spitzer extragalactic First Look Survey field – I. Observations, data analysis and source catalogue

Observations of the Spitzer extragalactic First Look Survey field taken at 610 MHz with the Giant Metrewave Radio Telescope are presented. Seven individual pointings were observed, covering a total area of ∼4 deg² with a resolution of 5.8 × 4.7 arcsec², PA 60°. The rms noise at the centre of the pointings is between 27 and 30 μJy before correction for the Giant Metrewave Radio Telescope (GMRT) primary beam. The techniques used for data reduction and production of a mosaicked image of the region are described, and the final mosaic, along with a catalogue of 3944 sources detected above ∼5σ, are presented. The survey complements existing radio and infrared data available for this region.     

Cathodoluminescence as a tool to discriminate impact melt,shocked and unshocked volcanics: A case study of samples from the El'gygytgyn impact structure

El'gygytgyn (Chukotka, Arctic Russia) is a well‐preserved impact structure, mostly excavated in siliceous volcanic rocks. For this reason, the El'gygytgyn structure has been investigated in recent years and drilled in 2009 in the framework of an ICDP (International Continental Scientific Drilling Program) project. The target rocks mostly consist of rhyodacitic ignimbrites and tuffs, which make it difficult to distinguish impact melt clasts from fragments of unshocked target rock within the impact breccia. Several chemical and petrologic attempts, other than dating individual clasts, have been considered to distinguish impact melt from unshocked volcanic rock of the targets, but none has proven reliable. Here, we propose to use cathodoluminescence (imaging and spectrometry), whose intensity is inversely correlated with the degree of shock metamorphism experienced by the investigated lithology, to aid in such a distinction. Specifically, impact melt rocks display low cathodoluminescence intensity, whereas unshocked volcanic rocks from the area typically show high luminescence. This high luminescence decreases with the degree of shock experienced by the individual clasts in the impact breccia, down to almost undetectable when the groundmass is completely molten. This might apply only to El'gygytgyn, because the luminescence in volcanic rocks might be due to devitrification and recrystallization processes of the relatively old (Cretaceous) target rock with respect to the young impactites (3.58 Ma). The alteration that affects most samples from the drill core does not have a significant effect on the cathodoluminescence response. In conclusion, cathodoluminescence imaging and spectra, supported by Raman spectroscopy, potentially provide a useful tool for in situ characterization of siliceous impactites formed in volcanic target.     

Application of a textural geospeedometer to the late‐stage magmatic history of MIL 03346

Abstract— Dynamic crystallization experiments performed on Fe‐rich, Al‐poor basalt are employed as a textural calibration set to quantify the late‐stage igneous history of nakhlite Miller Range (MIL) 03346. The ratio of crystal‐melt surface area to volume typifying morphologically distinct populations of Ca‐pyroxene has been shown to vary as a strong function of cooling rate (Hammer 2006). Furthermore, a texture of phenocrysts surrounded by finer‐grained groundmass crystals arises by sequential nucleation events during constant‐rate cooling, but multiple populations nucleate only if the cooling rate is 72 °C h^?1. Textural analysis of meteorite MIL 03346 reveals at least two distinct populations. The Ca‐pyroxene phenocryst and microphenocryst three dimensional (3D) aspect ratios are 112 ± 8.3 and 1530 ± 160 mm^?1, respectively. By comparison with the calibration set, the range of cooling rates consistent with 3D aspect ratios of both populations in MIL 03346 is ?20 °C h^?1An additional experiment was performed approximating a conductive heat transfer profile in order to interpret and apply results of constant‐rate cooling experiments to the natural cooling of magma. Results suggest that the textures of constant‐rate experiments parallel the initial period of rapid cooling in natural magma. Initial cooling rates of ?20 °C h^?1in the lava hosting MIL 03346 occur in conductively solidifying lava at depths of?0.4 m, constraining the minimum total thickness to 0.8 m. Crystal accumulation beginning in a subsurface reservoir and continuing after lava emplacement as an inflated pahoehoe sheet satisfies all textural constraints on the late‐stage igneous history of MIL 03346.     

High‐pressure metamorphic mineralogy of the Martian crust with implications for density and seismic profiles

Here, we calculate the mineralogy of the Martian lower crust and upper mantle as a function of pressure and temperature with depth using four bulk compositions (average crust, Gusev basalt, olivine‐phyric shergottite, and primitive average mantle). We then use this mineralogy to extract rock properties such as density and seismic velocities, describe their changes with varying conditions and geotherms, and make predictions for the crust–mantle boundary. Mineralogically, all compositions produce garnet, orthopyroxene, clinopyroxene in varying proportions at high pressures, with differences in minor minerals (spinel, ilmenite, rutile, and/or K‐feldspar). According to our calculations, the average crust and Gusev basalt compositions have the potential to yield higher densities than the average mantle composition, particularly for thicker crusts and/or colder geotherms. Therefore, recycling of the Martian crust into the mantle could occur through the process of crustal delamination, if not kinetically inhibited. However, our results show that, depending on crustal thickness, the crust may not be easily distinguishable from the mantle in seismic properties.     

To be or not to be oxidized: A case study of olivine behavior in the fusion crust of ureilite A 09368 and H chondrites A 09004 and A 09502

Meteorite fusion crusts are quenched melt layers formed during meteoroid atmospheric entry, mostly preserved as coating on the meteorite surface. Antarctic ureilite Asuka (A) 09368 and H chondrites A 09004 and A 09502 exhibit well preserved thick fusion crusts, characterized by extensive olivine crystallization. As olivine is one of the major components of most meteorites and its petrologic behavior is well constrained, it can be roughly considered as representative for the bulk meteorite. Thus, in this work, the evolution of olivine in fusion crusts of the above‐listed selected samples is investigated. The different shape and chemistry of olivine crystallized in the fusion crust, both as overgrown rim on relic olivine clasts and as new crystals, suggest a general temperature and cooling rate gradient. The occurrence of reverse and oscillatory zoning in individual olivine grains within the fusion crust suggests complex redox reactions. Overall, the investigated fusion crusts exhibit a general oxidation of the relatively reduced initial material. However, evidence of local reduction is preserved. Reduction is likely triggered by the presence of carbon in the ureilite or by overheating during the atmospheric entry. Constraining these processes provides a potential analog for interpreting features observed in cosmic spherules and micrometeorites and for calibrating experiments and numerical models on the formation of fusion crusts.     

Air ionization at rock surfaces and pre-earthquake signals

Pre-earthquake signals have been widely reported, including perturbations in the ionosphere. These precursory signals, though highly diverse, may be caused by just one underlying physical process: activation of highly mobile electronic charge carriers in rocks that are subjected to ever increasing levels of stress. The charge carriers are defect electrons associated with O^? in a matrix of O^2?. Known as positive holes or pholes h, they flow out of the stressed rock into the unstressed rock volume, traveling meters in the laboratory, probably kilometers in the field. At the rock–air interface they cause: (i) positive surface potential, (ii) field-ionization of air molecules, (iii) corona discharges. The rate of formation of airborne ions can exceed 10⁹ cm^?2 s^?1. Massive air ionization prior to major earthquakes increases the electrical conductivity in the air column and may cause ionospheric perturbations, earthquake lights, and unusual animal behavior as well as infrared emission.     

Physical, chemical and microbiological characterization of the intertidal sediments of Pereque Beach, Guarujá (SP), Brazil

Physical and chemical characteristics of intertidal sediments and their relationships with bacteria and cyanobacteria were analyzed at four stations at Pereque Beach. Granulometric analysis showed that Pereque beach has sediment that is classified as sand. The lowest value of the sediment C/N rates (6.08), mainly due to a higher concentration of organic nitrogen, was found at the northern part of Pereque Beach, where organic matter of marine source was more prominent. In this area, density (9.6x10(6)cells cm(-3)), biomass (1992.04ngC cm(-3)) and activity of bacteria were higher than at the southern end. In contrast, cyanobacteria density varied from 2.0 to 4.0x10(5)cells cm(-3), with biomass and total chlorophyll a of the sediment being higher at the southern part, where there are water input from Pereque River and higher organic matter of continental origin. The variability in the microbial population is discussed in the light of the sediment granulometry, organic matter quality, fresh water inflow and pollution.