Current-scattered (?) detrital remanence directions in the Zn-rich Pennsylvanian Stark black shale, USA

Palaeomagnetic results are reported from the metalliferous Stark black shale in the Upper Pennsylvanian (Missourian/Kasimovian) Kansas City Group. Palaeomagnetic analysis of 400 specimens from 28 sites gives a characteristic remanent magnetization in 17 sites of the shale that yields a Late Mississippian to Middle Pennsylvanian palaeopole at 32.2°N 128.5°E (dp = 4.7° and dm = 8.8°). The observed palaeomagnetic age is slightly older than the host rock, indicating that the mineralization of the Stark Shale has, excluding recent alteration, a primary sedimentary or syngenetic origin. The reason for the slightly older age is likely due to trace modern hematite that slightly steepens the remanence inclination. The large oval of 95 per cent confidence is interpreted to be caused by clay–magnetite aggregates that formed during sediment transport and the biasing effect of the gentle palaeocurrent at each site acting on the large aggregates. Therefore, the scattered distribution of the site mean remanence declinations found for the Stark Shale is evidence of a detrital remanent magnetization that is formed by primary sedimentary processes with an enriched metallic content and not remagnetization with mineralization by secondary hydrothermal processes.     

Study of the erosion rates in the upper Maracujá Basin (Quadrilátero Ferrífero/MG,Brazil) by the in situ produced cosmogenic 10Be method

The present work quantifies the erosive processes in the two main substrates (schists–phyllites and granites–gneisses) of the upper Maracujá Basin in the Quadrilátero Ferrífero/MG, Brazil, a region of semi‐humid tropical climate. Two measuring methods of concentration were used: (i) in situ produced ¹⁰Be in quartz veins (surface erosion rates) and (ii) ¹⁰Be in fluvial sediments (basin erosion rates). The results confirm that (i) erosion tends to be more aggressive close to the headwaters than in the lower parts of the basin and (ii) the region is now affected by dissection. Copyright © 2006 John Wiley & Sons, Ltd.     

足尺磁流变阻尼器的建模及动态特性

在过去三十年左右的时间里,结构保护系统受到了广大研究者的普遍关注.这种保护系统可以用来降低自然灾害(如地震、强风)对上木工程建筑的损害.由于磁流变阻尼器机械结构简单,动态范围大,能耗低,回复力大,鲁棒性良好,能够在满足不同工程项目需求的同时提供有效的结构抗震抗风手段,目前它是一种非常有前途的半主动结构减震装置.本文首先介绍了磁流变液体和装置的主要特性和优点,建立了磁流变阻尼器的伪静力轴对称模型,并将其结果和平行板模型以及阻尼器实验结果进行了比较.尽管伪静力模型对于阻尼器的设计十分有效,但是它们还不足以描述阻尼器的动态特性.对实际工程应用来说,动态响应时间是一项非常重要的性能指标.文章还讨论了影响磁流变阻尼器动态响应时间的因素,建立了基于Bouc-Wen模型的阻尼器动态模型.同时文章也提出了优化阻尼器动态响应的途径和方法以及其实验验证.     

In Situ Measurement of Electro-Osmotic Fluxes and Conductivity Using Single Wellbore Tracer Tests

Electro-osmosis (EO), the movement of water through porous media in response to an electric field, offers a means for extracting contaminated ground water from fine-grained sediments, such as clays, that are not easily amenable to conventional pump-and-treat approaches. The EO-induced water flux is proportional to the voltage gradient in a manner analogous to the flux dependence on the hydraulic gradient under Darcy's law. The proportionality constant, the soil electro-osmotic conductivity or k_eo, is most easily measured in soil cores using bench-top tests, where flow is one-dimensional and interfering effects attributable to Darcy's law can be directly accounted for. In contrast, quantification of EO fluxes and k_eo in the field under deployment conditions can be difficult because electrodes are placed in ground water wells that may be screened across a heterogeneous mixture of lithologies. As a result, EO-induced water fluxes constitute an approximate radial flow system that is superimposed upon a Darcy flow regime through permeable pathways that may or may not be coupled with hydraulic head differences created by the EO-induced water fluxes. A single well comparative tracer test, which indirectly measures EO fluxes by comparing wellbore tracer dilution rates between background and EO-induced water fluxes, may provide a means for routinely quantifying the efficacy of EO systems in such settings. EO fluxes measured in field tests through this technique at a ground water contamination site were used to estimate a mean k_eo value through a semianalytic line source model of the electric field. The resulting estimate agrees well with values reported in the literature and with values obtained with bench-top tests conducted on a soil core collected in the test area.     

Petrochemical Investigation of the Antique Ophiolite (Philippines): Implications on Volcanogenic Massive Sulfide and Podiform Chromitite Deposits

Abstract: The Antique ophiolite, located in Panay island (west‐central Philippines), corresponds to several tectonic slices within the suture zone between the Philippine Mobile Belt (PMB) and the North Palawan Block (NPB). It includes dismembered fragments of a basaltic sequence, dominantly pillow‐lavas with minor sheet flows, rare exposures of sheeted dikes, isotropic gabbros, subordinate layered mafic and ultramafic rock sequences and serpentinites. Most of the ophiolite units commonly occur as clasts and blocks within the serpentinites, which intrude the whole ophiolitic body, as well as, the basal conglomerate of the overlying Middle Miocene sedimentary formation. The volcanic rock sequence is characterized by chemical compositions ranging from transitional (T)‐MORB, normal (N)‐MORB and to chemistry intermediate between those of MORB and island arc basalt (IAB). The residual upper mantle sequence is harzburgitic and generally more depleted than the upper mantle underlying modern mid‐oceanic ridges. Calculations using whole‐rock and mineral compositions show that they can represent the residue of a fertile mantle source, which have undergone degrees of partial melting ranging from 9‐22.5 %. Some of the mantle samples display chondrite‐nor‐malized REE and extended multi‐element patterns suggesting enrichments in LREE, Rb, Sr and Zr, which are comparable to those found in fore‐arc peridotites from the Izu‐Bonin‐Mariana (IBM) arc system. The Antique ultramafic rocks also record relatively oxidizing mantle conditions (Δlog f_O2 (FMQ)=0.9‐3.5). As a whole, the ophiolite probably represents an agglomeration of oceanic ridge and fore‐arc crust fragments, which were juxtaposed during the Miocene collision of the PMB and the NPB. The intrusion of the serpentinites might be either coeval or subsequent to the accretion of the oceanic crust onto the fore‐arc. Volcanogenic massive sulfide (VMS) deposits occur either in or near the contact between the pillow basalts and the overlying sediments or interbedded with the sediments. The morphology of the deposits, type of metals, ore texture and the nature of the host rocks suggest that the formation of the VMS bodies was similar to the accumulation of metals around and in the subsurface of hydrothermal vents observed in modern mid‐oceanic ridge and back‐arc basin rift settings. The podiform chromitites occur as pods and subordinate layers within totally serpentinized dunite in the residual upper mantle sequence. No large coherent chromitite deposit was found since the host dunitic rocks often occur as blocks within the serpentinites. It is difficult to evaluate the original geodynamic setting of the mineralized bodies since the chemistry of the host rocks were considerably modified by alteration during their tectonic emplacement. A preliminary conclusion for Antique is that the VMS is apparently associated with a primitive tholeiitic intermediate MORB‐IAB volcanic suite, the chemistry of which is close to the calculated composition of the liquid that coexisted with the podiform chromitites.     

Stratigraphic Correlation of the Malusok Volcanogenic Massive Sulfide Deposits, Southern Mindanao, Philippines

Abstract: Two adjacent volcanogenic massive sulfide (VMS) deposits, the Main Malusok and the Malusok Southeast, are delineated within Barangay Tabayo, Siocon, Zamboanga del Norte, Mindanao, Philippines. These deposits comprise massive to semi-massive sulfide lenses representing the down-dip equivalent of oxidized gossans. The massive sulfides have a primary mineral assemblage of pyrite-chalcopyrite-sphalerite with significant amounts of supergene copper in the form of chal-cocite. Owing to structural and metamorphic overprinting combined with intense alteration, primary textures are generally obliterated. Rock types are classified according to dominant mineral assemblages whereas the main lithologic units comprising the Malusok volcanic package are divided based on the position of each unit relative to the mineralized zone. The main lithologic units are designated as the hanging wall, the host, and the footwall sequences. In correlating the stratigraphy of the Main Malusok zone with that of the Malusok Southeast zone, a chlorite/epidote-rich interval located at the base of the hanging wall sequence serves as a distinct stratigraphic marker from which all lithologies are referred to. Comparisons between the stratigraphy of the two areas show that massive to semi-massive sulfide lenses are confined within a single stratigraphic interval representing the favorable horizon for the entire Malusok area. However, differences exist relative to style of mineralization and configuration of the altered interval between the Main Malusok and the Malusok Southeast VMS deposits. Based on characteristics exhibited by each individual deposit, it is inferred that the Main Malusok VMS deposit overlies a feeder zone whereas the Malusok Southeast sulfide lenses represent satellite deposits and transported blocks.     

Spatial variability of water vapor turbulent transfer within the boundary layer

Although the physics of evaporation within the inner region of the boundary layer is believed to be well understood, observations of mass-energy exchange processes have been hindered by the limitations of point sensors. A combination of point sensors and active remote sensing, namely, water-Raman Lidar measurements, offers new opportunities to study relatively large areas at temporal and spatial scales previously unattainable. Results from experiments over uniform canopies both confirm some traditional theories and challenge some of the underlying assumptions concerning the homogeneity of the surface-atmosphere interface and the use of point sensors to characterize large areas.This work was performed under the auspices of the U.S. Department of Energy. The authors would like to thank F. Archuleta, J. Archuleta, F. Barnes, W. Clements, K. Muller and W. Porch of LANL, R. Whitis of USDA, R. Jackson and P. Pinter of USDA-WCL, and L. Balick of EG&G for their invaluable time and support.     

The impact of doubled CO2 on the energetics and hydrologic processes of mid-latitude transient eddies

The Northern Hemisphere winter (DJF) stationary eddy response of a general circulation model (GCM) to a doubling of atmospheric CO₂ is simulated with a linear steady state model as a response to anomalies in diabatic heating (latent, sensible and radiative), mountain and transient eddy effects. For this analysis the doubled CO₂ experiment performed by Wilson and Mitchell (1987) is used. The linear simulations of the control and perturbation climate capture most of the important features of the GCMs stationary eddies. The simulation of the anomalous stationary eddy pattern in the Northern Hemisphere captures only some of the important features of the GCMs anomalies. The climate anomalies in the Southern Hemisphere are poorly simulated. In the Northern Hemisphere the climate anomalies are dominated by the effect of transient eddies and mountains. In low latitudes also the contribution of latent heating is important. The contributions of sensible and radiative heating are small.