Dynamics of arrays of floating point-absorber wave energy converters with inter-body and bottom slack-mooring connections

If point absorbers are employed in the extensive exploitation of the offshore wave energy resource, they should be deployed in arrays, the distance between the elements in the array being possibly tens of meters. In such cases, it may be more convenient that the array is spread moored to the sea bottom through only some of its elements, located in the periphery, while the other array elements are prevented from drifting and colliding with each other by connections to adjacent elements. An array of identical floating point absorbers located at the grid points of an equilateral triangular grid is considered in the paper. A spread set of slack-mooring lines connect the peripheric floaters to the bottom. A weight is located at the centre of each triangle whose function is to pull the three floaters towards each other and keep the inter-body mooring lines under tension. The power take-off system (PTO) is a linear damper activated by the buoy heaving motion. The whole system–buoys, moorings and power take-off systems–is assumed linear, so that a frequency domain analysis may be employed. Hydrodynamic interference between the oscillating buoys in array is accounted for. Equations are presented for a set of three identical point absorbers. This is then extended to more complex equilateral triangular grid arrays. Results from numerical simulations, with regular and irregular waves, are presented for the motions and power absorption of hemispherical converters in arrays of three and seven elements and for different mooring parameters and wave incidence angles. Comparisons are given with the unmoored and independently-moored buoy situations.     

Conspicuous sediment structures in fossil beach deposits (southern Tenerife, Canary Islands, Spain): paleoliquefaction features versus biogenic origin

Tubular-shaped concretions and concretionary dykes occur in Holocene fossil beach deposits between the township of El Médano and Punta Roja in southern Tenerife, Canary Islands. These sediment structures have been interpreted either as the result of (a) the interaction between hot ignimbrites that overflowed wet beaches; (b) fast accumulation of beach sands on hot and degassing ignimbrites; (c) paleoliquefaction caused by an earthquake (seismites). Based on the interpretation as seismites, an intense paleoearthquake with a moment magnitude of M = 6.8 was proposed to be responsible for the generation of the paleoliquefaction structures. However, we here reinterpret the sedimentary structures in question using the general criteria diagnostic for rhizocretions and root tubules with respect to their orientation, size, branching system, and style of cementation and, thus, consider them, to be of biogenic origin.     

Onshore sandbar migration at Tairua Beach (New Zealand): Numerical simulations and field measurements

We observed the onshore migration (3.5 m/day) of a nearshore sandbar at Tairua Beach, New Zealand during 4 days of low-energy wave conditions. The morphological observations, together with concurrent measurements of waves and suspended sediment concentrations, were used to test a coupled, wave-averaged, cross-shore model. Because of the coarse bed material and the relatively low-energy conditions, the contribution of the suspended transport to the total transport was predicted and observed to be negligible. The model predicted the bar to move onshore because of the feedback between near-bed wave skewness, bedload, and the sandbar under weakly to non-breaking conditions at high tide. The predicted bathymetric evolution contrasts, however, with the observations that the bar migrated onshore predominantly at low tide. Also, the model flattened the bar, while in the observations the sandbar retained its steep landward-facing flank. A comparison between available observations and numerical simulations suggests that onshore propagating surf zone bores in very shallow water (< 0.25 m) may have been responsible for most of the observed bar behaviour. These processes are missing from the applied model and, given that the observed conditions can be considered typical of very shallow sandbars, highlight a priority for further field study and model development. The possibility that the excess water transported by the bores across the bar was channelled alongshore to near-by rip-channels further implies that traditional cross-shore measures to judge the applicability of a cross-shore morphodynamic model may be misleading.     

The influence of 70 and 120 kHz tonal signals on the behavior of harbor porpoises (Phocoena phocoena) in a floating pen

Two harbor porpoises in a floating pen were subjected to five pure tone underwater signals of 70 or 120kHz with different signal durations, amplitudes and duty cycles (% of time sound is produced). Some signals were continuous, others were intermittent (duty cycles varied between 8% and 100%). The effect of each signal was judged by comparing the animals' surfacing locations and number of surfacings (i.e. number of respirations) during test periods with those during baseline periods. In all cases, both porpoises moved away from the sound source, but the effect of the signals on respiration rates was negligible. Pulsed 70kHz signals with a source level (SL) of 137dB had a similar effect as a continuous 70kHz signal with an SL of 148dB (re 1muPa, rms). Also, a pulsed 70kHz signal with an SL of 147dB had a much stronger deterring effect than a continuous 70kHz signal with a similar SL. For pulsed 70kHz signals (2s pulse duration, 4s pulse interval, SL 147dB re 1muPa, rms), the avoidance threshold sound pressure level (SPL), in the context of the present study, was estimated to be around 130dB (re 1muPa, rms) for porpoise 064 and around 124dB (re 1muPa, rms) for porpoise 047. This study shows that ultrasonic pingers (70kHz) can deter harbor porpoises. Such ultrasonic pingers have the advantage that they do not have a "dinner bell" effect on pinnipeds, and probably have no, or less, effect on other marine fauna, which are often sensitive to low frequency sounds.     

Microbial photosynthesis in coral reef sediments (Heron Reef, Australia)

We investigated microphytobenthic photosynthesis at four stations in the coral reef sediments at Heron Reef, Australia. The microphytobenthos was dominated by diatoms, dinoflagellates and cyanobacteria, as indicated by biomarker pigment analysis. Conspicuous algae firmly attached to the sand grains (ca. 100 μm in diameter, surrounded by a hard transparent wall) were rich in peridinin, a marker pigment for dinoflagellates, but also showed a high diversity based on cyanobacterial 16S rDNA gene sequence analysis. Specimens of these algae that were buried below the photic zone exhibited an unexpected stimulation of respiration by light, resulting in an increase of local oxygen concentrations upon darkening. Net photosynthesis of the sediments varied between 1.9 and 8.5 mmol O₂ m⁻² h⁻¹ and was strongly correlated with Chl a content, which lay between 31 and 84 mg m⁻². An estimate based on our spatially limited dataset indicates that the microphytobenthic production for the entire reef is in the order of magnitude of the production estimated for corals. Photosynthesis stimulated calcification at all investigated sites (0.2–1.0 mmol Ca²⁺ m⁻² h⁻¹). The sediments of at least three stations were net calcifying. Sedimentary N₂-fixation rates (measured by acetylene reduction assays at two sites) ranged between 0.9 to 3.9 mmol N₂ m⁻² h⁻¹ and were highest in the light, indicating the importance of heterocystous cyanobacteria. In coral fingers no N₂-fixation was measurable, which stresses the importance of the sediment compartment for reef nitrogen cycling.     

Isotopic,trace element and nutrient characterization of coastal waters from Ubatuba inner shelf area,south-eastern Brazil

Stable isotopes, tritium, radium isotopes, radon, trace elements and nutrients data were collected during two sampling campaigns in the Ubatuba coastal area (south-eastern Brazil) with the aim of investigating submarine groundwater discharge (SGD) in the region. The isotopic composition (δD, δ¹⁸O, ³H) of submarine waters was characterised by significant variability and heavy isotope enrichment. The stable isotopes and tritium data showed good separation of groundwater and seawater groups. The contribution of groundwater in submarine waters varied from a few % to 17%. Spatial distribution of ²²²Rn activity concentration in surface seawater revealed changes between 50 and 200 Bq m⁻³ which were in opposite relationship with observed salinities. Time series measurements of ²²²Rn activity concentration in Flamengo Bay (from 1 to 5 kBq m⁻³), obtained by in situ underwater gamma-spectrometry showed a negative correlation between the ²²²Rn activity concentration and tide/salinity. This may be caused by sea level changes as tide effects induce variations of hydraulic gradients, which increase ²²²Rn concentration during lower sea level, and opposite, during high tides where the ²²²Rn activity concentration is smaller. The estimated SGD fluxes varied during 22–26 November between 8 and 40 cm d⁻¹, with an average value of 21 cm d⁻¹ (the unit is cm³/cm² per day). The radium isotopes and nutrient data showed scattered distributions with offshore distance and salinity, which implies that in a complex coast with many small bays and islands, the area has been influenced by local currents and groundwater–seawater mixing. SGD in the Ubatuba area is fed by coastal contaminated groundwater and re-circulated seawater (with small admixtures of groundwater), which claims for potential environmental concern with implications on the management of freshwater resources in the region.     

Determination of residence time and mixing processes of the Ubatuba,Brazil, inner shelf waters using natural Ra isotopes

Coastal waters contain elevated dissolved activities of short-lived radium isotopes, ²²³Ra and ²²⁴Ra, having half-lives of 11.4 and 3.66 days, respectively. The input of these isotopes near the coast must be balanced by decay and mixing into the open ocean, where excess activities are zero. Since the decay rate is known, in the ideal case the mixing rate may be determined from the offshore distribution of these isotopes. This study found that samples collected in June 2000 followed the expected exponential decrease with distance offshore. We assign a dispersion coefficient of 28–39 m² s⁻¹ for this study. During January 2002 and November 2003, there was not a consistent decrease of activity with distance offshore. This is likely due to the ruggedness of the coastline, where many bays and small islands interrupt simple mixing patterns. To estimate exchange rates during 2002 and 2003, we used a model based on the decrease in the ²²⁴Ra/²²³Ra activity ratio (AR) with time for samples isolated from fresh inputs of Ra. This model yielded residence times of 1–2 weeks for samples collected within 20 km of the coast. We used this residence time to calculate the flux of ²²⁸Ra (half-life = 5.7 years) to the study area necessary to maintain the enrichment relative to ocean water. This enrichment is a factor of ten greater than the flux of ²²⁸Ra expected from submarine groundwater discharge (SGD) occurring within 50 m of shore.     

The role of two sediment-dwelling invertebrates on the mercury transfer from sediments to the estuarine trophic web

The annual total and organic mercury bioaccumulation pattern of Scrobicularia plana and Hediste diversicolor was assessed to evaluate the potential mercury transfer from contaminated sediments to estuarine food webs. S. plana was found to accumulate more total and organic mercury than H. diversicolor, up to 0.79 mg kg⁻¹ and 0.15 mg kg⁻¹ (wet weight) respectively, with a maximum annual uptake of 0.21 mg kg⁻¹ y⁻¹, while for methylmercury the annual accumulation was similar between species and never exceeded 0.045 mg kg⁻¹ y⁻¹. The higher organic mercury fraction in H. diversicolor is related to the omnivorous diet of this species. Both species increase methylmercury exposure by burrowing activities and uptake in anoxic, methylmercury rich sediment layers. Integration with the annual biological production of each species revealed mercury incorporation rates that reached 28 μg m⁻² y⁻¹, and to extract as much as 11.5 g Hg y⁻¹ (of which 95% associated with S. plana) in the 0.4 km² of the most contaminated area, that can be transferred to higher trophic levels. S. plana is therefore an essential vector in the mercury biomagnification processes, through uptake from contaminated sediments and, by predation, to transfer it to economically important and exploited estuarine species.     

The effect of a topographic high on the morphological stability of a two-inlet bay system

The cross-sectional stability of two tidal inlets connecting the same back-barrier lagoon to the ocean is investigated. The condition for equilibrium is the cross-sectional area tidal prism relationship. In an earlier study [Van de Kreeke, J., 1990. Can multiple inlets be stable? Estuarine, Coastal and Shelf Science 30: 261–273.], using the same equilibrium condition, it was concluded that where two inlets connect the same basin to the ocean ultimately one inlet will close. One of the major assumptions in that study was that the water level in the basin fluctuated uniformly. In hindsight this assumption might be too restrictive. For example, in the Wadden Sea the back barrier lagoon consists of a series of basins, rather than one single basin, separated by topographic highs. These topographic highs limit but do not exclude the exchange of water between the sub-basins. For this reason in the present study, a topographic high in the form of a weir was added, separating the back-barrier lagoon in two sub-basins. The water level in the sub-basins, rather than in the back-barrier as a whole, is assumed to fluctuate uniformly. For this schematization the hydrodynamic equations are solved using a finite difference method. The results, together with the equilibrium condition, yield the equilibrium flow curve for each of the inlets. The intersections of the two equilibrium flow curves represent combinations of cross-sectional areas for which both inlets are in equilibrium. The stability of the equilibriums was investigated using a non-linear stability analysis resulting in a flow diagram. Calculations were carried out for different inlet and weir characteristics. Sinussoidal tides were the same for both inlets. The results show that for relatively large wetted cross-sectional areas over the topographic high, approaching the situation of a single basin, there are no combinations of inlet cross-sectional areas for which both inlets are in a stable equilibrium. This supports the conclusion in the earlier study. For relatively small wetted cross-sectional areas over the topographic high there is one set of stable equilibriums. In that case the two-inlet bay system approaches that of two single-inlet bay systems.     

Large-scale dune erosion tests to study the influence of wave periods

Large-scale physical model tests were performed to quantify the effects of the wave period on dune erosion. Attention was focussed on 2D cross-shore effects in a situation with sandy dunes and extreme water levels and wave conditions. Besides profile measurements, detailed measurements in time and space of water pressure, flow velocities and sediment concentrations were performed in the near near-shore area. It was concluded that a longer wave period leads to a larger dune erosion volume and to a larger landward retreat of the dune face. Tests with double-peaked wave spectra showed that the influence of the spectral shape on dune erosion was best represented by the T_m − 1,0 spectral mean wave period, better than the peak wave period, T_p. The effect of the wave period on dune erosion was implemented in a dune erosion prediction method that estimates erosion volumes during normative storm conditions for the Dutch coast. More details of the measurements and additional analyses of physical processes are described in an accompanying paper by Van Thiel de Vries et al. [Van Thiel de Vries, J.S.M., van Gent, M.R.A., Reniers, A.J.H.M. and Walstra, D.J.R., submitted for publication. Analysis of dune erosion processes in large scale flume experiments, In this volume of Coastal Engineering.].