Rainfall thresholds for the triggering of landslides considering previous soil moisture conditions (Asturias,NW Spain)

Given its geological and climatic conditions and its rugged orography, Asturias is one of the most landslide prone areas in the North of Spain. Most of the landslides occur during intense rainfall episodes. Thus, precipitation is considered the main triggering factor in the study area, reaching average annual values of 960 mm. Two main precipitation patterns are frequent: (i) long-lasting periods of moderate rainfall during autumn and winter and (ii) heavy short rainfall episodes during spring and early summer. In the present work, soil moisture conditions in the locations of 84 landslides are analysed during two rainfall episodes, which represent the most common precipitation patterns: October–November 2008 and June 2010. Empirical data allowed the definition of available water capacity percentages of 99–100% as critical soil moisture conditions for the landslide triggering. Intensity-duration rainfall thresholds were calculated for each episode, considering the periods with sustained high soil moisture levels before the occurrence of each analysed landslide event. For this purpose, data from daily water balance models and weather stations were used. An inverse relationship between the duration of the precipitation and its intensity, consistent with published intensity-duration thresholds, was observed, showing relevant seasonal differences.     

Toxic metals in a highly urbanized industry-impacted estuary (Bahia Blanca Estuary,Argentina): spatio-temporal analysis based on GIS

Cadmium, chromium, nickel, and lead were evaluated in the particulate fraction at one of the most industrialized estuaries at the Southwestern Atlantic Ocean, through Geographic Information System (GIS). Concentrations were analyzed at 21 stations during 2008–2010. The highest metal concentrations (Cd: 8,9; Cr: 256,49; Ni: 27,02; Pb: 78,43 µg g^??1 d. w.) were recorded at the stations located near industrial and urban discharges situated along the estuary. In addition, Pb presented a different seasonal and spatial behavior in comparison with Cd, Cr and Ni. Winter and spring presented the higher concentrations of Pb, and the inner stations presented the higher values. The estuary is considered a moderate to strongly polluted and significantly polluted according to the Index of geoaccumulation (I_geo) and the Enrichment Factor of Cd, respectively. The Multidimensional Scaling plot showed three groups of stations: the inner, associated to low levels of metals (G1), middle stations (G2) with intermediate levels and the outer (G3) with the highest ones. In addition, this work reveals the usefulness of the GIS-mapping techniques in the distribution of pollutants along an estuarine environment and the environmental quality assessment of estuarine systems.     

Bioaccumulation of heavy metals in <Emphasis Type="Italic">Limnobium laevigatum</Emphasis> and <Emphasis Type="Italic">Ludwigia peploides</Emphasis>: their phytoremediation potential in water contaminated with heavy metals

Contamination with heavy metals in surface and groundwater is a threat to human health and ecosystems. Due to this, the need arises to remediate water polluted through ecological and profitable technologies, such as phytoremediation. The objective of the work was to evaluate the concentration of lead (Pb) and zinc (Zn) in the floating macrophytes Limnobium laevigatum and Ludwigia peploides, after being exposed to contaminated water experimentally. In this way to be able to determine if these plants have mechanisms that allow them to accumulate the metals in the roots and to perform the translocation of these to different vegetative organs, L. laevigatum and L. peploides were placed in solutions contaminated with Pb ([Pb]?=?5 mg/l) and Zn ([Zn]?=?20 mg/l). The concentrations of metals in water, root and leaf samples were evaluated as a function of time (0, 1, 2 and 4 days). The determination of the metals was performed by the atomic absorption spectrophotometry technique. After 4 days of exposure to Pb and Zn, the plants showed high metal removal efficiencies of water, more to 70% in all cases. Pb was accumulated fundamentally by roots, while Zn was accumulated more in the leaves. In addition, the bioconcentration and translocation factors for each metal were calculated.     

Revisit the calibration errors on experimental slant total electron content (TEC) determined with GPS

The calibration errors on experimental slant total electron content (TEC) determined with global positioning system (GPS) observations is revisited. Instead of the analysis of the calibration errors on the carrier phase leveled to code ionospheric observable, we focus on the accuracy analysis of the undifferenced ambiguity-fixed carrier phase ionospheric observable determined from a global distribution of permanent receivers. The results achieved are: (1) using data from an entire month within the last solar cycle maximum, the undifferenced ambiguity-fixed carrier phase ionospheric observable is found to be over one order of magnitude more accurate than the carrier phase leveled to code ionospheric observable and the raw code ionospheric observable. The observation error of the undifferenced ambiguity-fixed carrier phase ionospheric observable ranges from 0.05 to 0.11 total electron content unit (TECU) while that of the carrier phase leveled to code and the raw code ionospheric observable is from 0.65 to 1.65 and 3.14 to 7.48 TECU, respectively. (2) The time-varying receiver differential code bias (DCB), which presents clear day boundary discontinuity and intra-day variability pattern, contributes the most part of the observation error. This contribution is assessed by the short-term stability of the between-receiver DCB, which ranges from 0.06 to 0.17 TECU in a single day. (3) The remaining part of the observation errors presents a sidereal time cycle pattern, indicating the effects of the multipath. Further, the magnitude of the remaining part implies that the code multipath effects are much reduced. (4) The intra-day variation of the between-receiver DCB of the collocated stations suggests that estimating DCBs as a daily constant can have a mis-modeling error of at least several tenths of 1 TECU.     

Image-aided platform orientation determination with a GNSS/low-cost IMU system using robust-adaptive Kalman filter

The availability of miniaturized sensors with enhanced capabilities, new methods for image processing, and easy access to small and low-weight airborne platforms for data acquisition, including unmanned vehicles, opens new possibilities for geodetic navigation applications and developing new developments in sensor fusion. In this context, the development of efficient methods, based on low-cost sensors, to extract precise georeferenced information from digital cameras is of utmost interest. We present a method to improve the performance of the integration of GNSS/low-cost IMU by exploiting the orientation changes retrieved from digital images. In this work, a robust-adaptive Kalman filter is also introduced to further improve the performance of the method deployed. The adaptive factor and the robust factor accomplished are determined by innovation information and the threshold value of orientation changes between consecutive images. Results from airborne tests used to assess the performance of the method are presented. The results show that using a non-metric camera, the Euler angle estimation accuracy of the GNSS/low-cost IMU integration can be improved to be close to 0.5 degree and an additional improvement, which can reach 59%, can be achieved after using the robust-adaptive Kalman filter.     

3D-Monitoring Big Geo Data on a seaport infrastructure based on FIWARE

Many organizations of all kinds are using new technologies to assist the acquisition and analysis of data. Seaports are a good example of this trend. Seaports generate data regarding the management of marine traffic and other elements, as well as environmental conditions given by meteorological sensors and buoys. However, this enormous amount of data, also known as Big Data, is useless without a proper system to organize, analyze and visualize it. SmartPort is an online platform for the visualization and management of a seaport data that has been built as a GIS application. This work offers a Rich Internet Application that allows the user to visualize and manage the different sources of information produced in a port environment. The Big Data management is based on the FIWARE platform, as well as “The Internet of Things” solutions for the data acquisition. At the same time, Glob3 Mobile (G3M) framework has been used for the development of map requirements. In this way, SmartPort supports 3D visualization of the ports scenery and its data sources.     

The Effect of Key Parameters on the Strength of a Dispersive Soil Stabilized with Sustainable Binders

Geotechnical and Geological Engineering - Dispersive soils are susceptible to phenomena of internal and external erosion when in contact with relatively pure water due to its particle’s...     

Hydrologic models coupled with 2D hydrodynamic model for high-resolution urban flood simulation

Natural Hazards - Floods are the most frequent natural disaster and pose a very challenging threat to many cities worldwide. Understanding the flood dynamic is essential for developing strategies...     

Long- and short-term volcanic hazard assessment of El Chichón Volcano (Mexico) through Bayesian inference

Natural Hazards - The 1982 eruption of El Chichón volcano constitutes the worst volcanic disaster in Mexico producing more than 2000 fatalities, thousands of displaced people and severe...     

9000 years of changes in peat organic matter composition in Store Mosse (Sweden) traced using FTIR-ATR

Store Mosse (the ‘Great Bog’ in Swedish) is one of the most extensive bog complexes in southern Sweden (~77 km²), where pioneering palaeoenvironmental research has been carried out since the early 20th century. This includes, for example, vegetation changes, carbon and nitrogen dynamics, peat decomposition, atmospheric metal pollution, mineral dust deposition, dendrochronology, and tephrochronology. Even though organic matter (OM) represents the bulk of the peat mass and its compositional change has the potential to provide crucial ecological information on bog responses to environmental factors, peat OM molecular composition has not been addressed in detail. Here, a 568-cm-deep peat sequence was studied at high resolution, by attenuated reflectance Fourier-transform infrared spectroscopy (FTIR-ATR) in the mid-infrared region (4000–400 cm^–1). Principal components analysis was performed on selected absorbances and change-point modelling was applied to the records to determine the timing of changes. Four components accounted for peat composition: (i) depletion/accumulation of labile (i.e. carbohydrates) and recalcitrant (i.e. lignin and other aromatics, aliphatics, organic acids and some N compounds) compounds, due to peat decomposition; (ii) variations in N compounds and carbohydrates; (iii) residual variation of lignin and organic acids; and (iv) residual variation of aliphatic structures. Peat decomposition showed two main patterns: a long-term trend highly correlated to peat age (r = 0.87), and a short-term trend, which showed five main phases of increased decomposition (at ~8.4–8.1, ~7.0–5.6, ~3.5–3.1, ~2.7–2.1 and ~1.6–1.3 ka) – mostly corresponding to drier climate and its effect on bog hydrology. The high peat accumulation event (~5.6–3.9 ka), described in earlier studies, is characterized by the lowest degree of peat decomposition of the whole record. Given that FTIR-ATR is a quick, non-destructive, cost-effective technique, our results indicate that it can be applied in a systematic way (including multicore studies) to peat research and provide relevant information on the evolution of peatlands.