Dynamics of arrays of floating point-absorber wave energy converters with inter-body and bottom slack-mooring connections

If point absorbers are employed in the extensive exploitation of the offshore wave energy resource, they should be deployed in arrays, the distance between the elements in the array being possibly tens of meters. In such cases, it may be more convenient that the array is spread moored to the sea bottom through only some of its elements, located in the periphery, while the other array elements are prevented from drifting and colliding with each other by connections to adjacent elements. An array of identical floating point absorbers located at the grid points of an equilateral triangular grid is considered in the paper. A spread set of slack-mooring lines connect the peripheric floaters to the bottom. A weight is located at the centre of each triangle whose function is to pull the three floaters towards each other and keep the inter-body mooring lines under tension. The power take-off system (PTO) is a linear damper activated by the buoy heaving motion. The whole system–buoys, moorings and power take-off systems–is assumed linear, so that a frequency domain analysis may be employed. Hydrodynamic interference between the oscillating buoys in array is accounted for. Equations are presented for a set of three identical point absorbers. This is then extended to more complex equilateral triangular grid arrays. Results from numerical simulations, with regular and irregular waves, are presented for the motions and power absorption of hemispherical converters in arrays of three and seven elements and for different mooring parameters and wave incidence angles. Comparisons are given with the unmoored and independently-moored buoy situations.     

Tectonics of an extinct ridge-transform intersection,Drake Passage (Antarctica)

New swath bathymetric, multichannel seismic and magnetic data reveal the complexity of the intersection between the extinct West Scotia Ridge (WSR) and the Shackleton Fracture Zone (SFZ), a first-order NW-SE trending high-relief ridge cutting across the Drake Passage. The SFZ is composed of shallow, ridge segments and depressions, largely parallel to the fracture zone with an `en echelon' pattern in plan view. These features are bounded by tectonic lineaments, interpreted as faults. The axial valley of the spreading center intersects the fracture zone in a complex area of deformation, where N120° E lineaments and E–W faults anastomose on both sides of the intersection. The fracture zone developed within an extensional regime, which facilitated the formation of oceanic transverse ridges parallel to the fracture zone and depressions attributed to pull-apart basins, bounded by normal and strike-slip faults.On the multichannel seismic (MCS) profiles, the igneous crust is well stratified, with numerous discontinuous high-amplitude reflectors and many irregular diffractions at the top, and a thicker layer below. The latter has sparse and weak reflectors, although it locally contains strong, dipping reflections. A bright, slightly undulating reflector observed below the spreading center axial valley at about 0.75 s (twt) depth in the igneous crust is interpreted as an indication of the relict axial magma chamber. Deep, high-amplitude subhorizontal and slightly dipping reflections are observed between 1.8 and 3.2 s (twt) below sea floor, but are preferentially located at about 2.8–3.0 s (twt) depth. Where these reflections are more continuous they may represent the Mohorovicic seismic discontinuity. More locally, short (2–3 km long), very high-amplitude reflections observed at 3.6 and 4.3 s (twt) depth below sea floor are attributed to an interlayered upper mantle transition zone. The MCS profiles also show a pattern of regularly spaced, steep-inclined reflectors, which cut across layers 2 and 3 of the oceanic crust. These reflectors are attributed to deformation under a transpressional regime that developed along the SFZ, shortly after spreading ceased at the WSR. Magnetic anomalies 5 to 5 E may be confidently identified on the flanks of the WSR. Our spreading model assumes slow rates (ca. 10–20 mm/yr), with slight asymmetries favoring the southeastern flank between 5C and 5, and the northwestern flank between 5 and extinction. The spreading rate asymmetry means that accretion was slower during formation of the steeper, shallower, southeastern flank than of the northwestern flank.     

Stratigraphic framework of gas accumulations in the Ría de Pontevedra (NW Spain)

Knowledge of marine geological environments in which shallow gas is accumulating is becoming increasingly important in global studies of climate change because a measurable proportion of the total methane source comes from continental margins. Previous studies have revealed that coastal environments represent important geological environments where microbial methane is being generated, is accumulating, and is being released. In the Ría de Pontevedra, at least 4.5 km² of seafloor in the innermost part of the ría is underlain by sediments containing natural gas. Seismic interpretation contributes new findings for the definition of periods and geological environments in which the gas could have been generated, and is accumulating and released in the Ría de Pontevedra. Groundtruthing the seismic data (facies, environments) makes it possible to identify favourable geological environments for gas generation in the sedimentary infill of the Ría de Pontevedra. Sequence stratigraphy based on high-resolution seismic profiles and post-Last Glacial Maximum sea-level records makes it possible to establish the stratigraphic architecture of the ría and to define the periods in which gas could have been generated. The results of this study show that the sedimentary infill is composed of a fifth-order sequence developed since the Last Glacial Maximum. Within this sequence, gas appears to have accumulated in the Holocene deposits associated with the latest transgressive and highstand system tracts. Seismic analysis shows that gas could have been generated in different geological environments in the Ría de Pontevedra. If coastal environments at times of lower sea level were similar to those of the present, organic-rich mud deposits (deposited mainly in lakes, estuaries and floodplains) could have survived transgression and remained buried as potential gas sources in the inner part of the ría.     

Mid-Holocene evolution and paleoenvironments of the shoreface–offshore transition, north-eastern Argentina: New evidence based on benthic microfauna

A sedimentary record spanning 5792–5511 cal yr BP and 3188–2854 cal yr BP was recovered at 36° 45′ 43″ S–56 ° 37′ 13″ W, south-west South Atlantic. The sedimentological features and micropaleontological (benthic foraminifera and ostracoda) content were analyzed in order to reconstruct paleoenvironmental conditions. Considerable environmental fluctuations are indicated by all these proxies. Five different stages were distinguished: Stage 1 (ca. 5800–5000 cal yr BP) consists of muddy sand with abundant microfossils. In this interval, species typical for inner marine shelf environments maintained a high abundance. Stage 2 consists of plastic light greenish grey clays barren of microfossils, and probably represents fluvial input from the de la Plata River to the shelf contemporaneous of a lowering of sea level. Stage 3 is composed of brownish yellow sandy silts, and represents increasing marine conditions in the area as reflected by higher faunal diversity and typical foraminifera of inner shelf environments. Stage 4 is made of homogeneous mud, barren of microfossil, which represents a new pulse of fluvial input to the shelf in consequence of a new fall in sea level. The final part of the core (Stage 5) is a coarsening upward sequence, grading from greeny brown clayey sandy silts to coarse shelly sands and represents the modern sedimentation in the area. This interpretation strengthens the stepped model of late-Holocene sea-level fall between 5511–5792 cal yr BP and 2854–3188 cal yr BP in Buenos Aires coast, and agrees with the relative sea-level history previously proposed by some authors from western South Atlantic coasts.     

Reionization and the Cosmic Dawn with the Square Kilometre Array

The Square Kilometre Array (SKA) will have a low frequency component (SKA-low) which has as one of its main science goals the study of the redshifted 21 cm line from the earliest phases of star and galaxy formation in the Universe. This 21 cm signal provides a new and unique window both on the time of the formation of the first stars and accreting black holes and the subsequent period of substantial ionization of the intergalactic medium. The signal will teach us fundamental new things about the earliest phases of structure formation, cosmology and even has the potential to lead to the discovery of new physical phenomena. Here we present a white paper with an overview of the science questions that SKA-low can address, how we plan to tackle these questions and what this implies for the basic design of the telescope.     

Spatial and temporal evolution of soft and hard X-ray emission in a solar flare

We study the spatial and temporal characteristics of the 3.5 to 30.0 keV emission in a solar flare on April 10, 1980. The data were obtained by the Hard X-ray Imaging Spectrometer aboard the Solar Maximum Mission Satellite. It is complemented in our analysis with data from other instruments on the same spacecraft, in particular that of the Hard X-ray Burst Spectrometer.Key results of our investigation are: (a) Continuous energy release is needed to substain the increase of the emission through the rising phase of the flare, before and after the impulsive phase in hard X-rays. The energy release is characterized by the production of hot (5 × 10⁷ T 1.5 × 10⁸ K) thermal regions within the flare loop structures. (b) The observational parameters characterizing the impulsive burst show that it is most likely associated with non-thermal processes (particle acceleration). (c) The continuous energy release is associated with strong chromospheric evaporation, as evidenced in the spectral line behavior determined from the Bent Crystal Spectrometer data. Both processes seem to stop just before flare maximum, and the subsequent evolution is most likely governed by the radiative cooling of the flare plasma.     

Direct detection of the secondary spectrum of the interacting eclipsing binary TX UMa

Eclipsing binary TX UMa was observed with the D.A.O. high-dispersion spectrographs in 1969–1970, with emphasis on the detailed coverage of the primary minimum. One spectrum was taken exclusively within totality, thus exhibiting an uncontaminated spectrum of the secondary component. This leads to spectral reclassification of the secondary (F6 IV). The narrowing of the line profile of the H-line in totality is interpreted in terms of synchronous rotation of the secondary (v sini80 km s^–1) while the primary rotates faster (v sini130 km s^–1) than synchronously (v sini50 km s^–1). Although the secondary does not fill in its Roche lobe fully, the system exhibits pronounced indications of rather strong physical interaction. This is now supported also by the profound changes of the line profiles of the H-line with phase.     

Can Brans-Dicke universes in five dimensions be interpreted as 4-dimensional general relativity cosmologies?

The 5-dimensional Jordan-Brans-Dicke cosmologies in vacuum are found for the Bianchi type I metric, their relation with general relativity cosmologies is studied. Two solutions are possible, both produce effective pressure and energy density in the 4-dimensional G.R.-universes. One is a power-law relation, with two cases, the first one is forp _eff=_eff and the other forp _eff=_eff(– 1 < < 1) has a behaviour as the open flat universe. The second solution is an exponential only valid forp _eff=–_eff. In all cases the three-space expansion reaches infinity ast and the fifth dimension can be made to decrease approaching zero. The scalar field can increase or decrease with time.