Projecting land-use change processes in the Sierra Norte of Oaxaca, Mexico

The objective of study was to explore short-term trends of processes that determine land-use change in Sierra Norte of Oaxaca (SNO), Mexico. Land use and land cover changes (LULCC) were estimated in a complex mosaic of vegetation in the SNO from 1980 to 2000, and projected them to 2020 through a Markovian model. SNO is highly vulnerable to climatic change according to a 2050 GCM scenario. However, 3% annual rate of tropical and temperate forest deforestation from agriculture and livestock encroachment, suggest the threat from land-use change is higher than that from climatic change for this study site. Productive land-use strategies are needed to reduce such high deforestation rates for tropical regions. Controlling deforestation would also reduce short-term effects of CO₂ emissions to the atmosphere. Because of the necessity to evaluate anthropogenic ecosystem changes, it is imperative to separate short-term influences such as deforestation, from long-term influences such as climatic change.     

Seed germination of five Helianthemum species: Effect of temperature and presowing treatments

The germination behaviour of five Helianthemum species (H. almeriense, H. appeninum, H. cinereum, H. hirtum, H. squamatum) has been studied under controlled conditions. Constant 15, 20 or 25 °C and alternating 25/15 °C temperature regimes and 16/8 h light/dark photoperiod conditions were used. Presowing treatments applied were manual scarification, boiling water, hot water, dry heat and sulphuric acid. Germination values recorded were final germination percentage and germination rate expressed as days to reach 50% of the final germination percentage (T₅₀). Incubation temperature had no significant effect on final germination percentage for untreated seeds of the five Helianthemum species. However, variation due to temperature was significant for scarified seeds, with the lowest germination percentage attained at 25 °C. In all Helianthemum species studied, the highest germination percentages were obtained by manual scarification of seeds. Germination rate of scarified seeds decreased as germination temperature increased. The different presowing treatments investigated allowed some germination in some species, but none were any better than manual scarification. The high germination among most species studied, following mechanical rupture of the seed coat, shows that the mechanism of dormancy lies in the seed coat. The physical dormancy caused by impermeable seed-coat appears to be the main reason of poor germination of untreated seeds of Helianthemum species studied.     

Haul-out pattern of itinerant male Antarctic fur seals (Arctocephalus gazella) at Laurie Island, South Orkney Islands

The seasonal haul-out pattern of itinerant male Antarctic fur seals ( Arctocephalus gazella ) was determined by regular counts at Mossman Peninsula, Laurie Island, South Orkney Islands, from 1996 to 2005. Small numbers of animals began to arrive at the beach in late December/early January (mean date 28 December Ø 15 days, n= 10). Peak numbers of animals ashore changed considerably between seasons. In 1996, 1998 and 2001, peak numbers were registered in March (6/3, 18/3 and 6/3, respectively). Numbers peaked in 1997, 1999 and 2005 at the end of January/beginning of February (26/1,2/2 and 28/1, respectively). In 2000, 2002, 2003 and 2004 peaks were registered in the third week of February (15/2, 22/2, 14/2 and 20/2, respectively). Peaks in numbers of seals ashore also varied between years, being minimum during 2001 (2531 individuals) and maximum during 2006 (16 610 individuals). In March 1998 the coasts of Laurie Island were surveyed by navigating inflatable boats near the shoreline; 18 haul-out places were identified. The big differences in peak numbers, as well as in the dates of peak events among years, suggest that local conditions could have an effect on the numbers of animals hauled out in a given year. It may therefore be difficult to predict trends from summer censuses in non-breeding places.     

3D numerical modelling of fluid flow in the Val-d’Or orogenic gold district: major crustal shear zones drain fluids from overpressured vein fields

Fluid flow patterns have been determined using oxygen isotope isopleths in the Val-d’Or orogenic gold district. 3D numerical modelling of fluid flow and oxygen isotope exchange in the vein field shows that the fluid flow patterns can be reproduced if the lower boundary of the model is permeable, which represents middle or lower crustal rocks that are infiltrated by a metamorphic fluid generated at deeper levels. This boundary condition implies that the major crustal faults so conspicuous in vein fields do not act as the only major channel for upward fluid flow. The upper model boundary is impermeable except along the trace of major crustal faults where fluids are allowed to drain out of the vein field. This upper impermeable boundary condition represents a low-permeability layer in the crust that separates the overpressured fluid from the overlying hydrostatic fluid pressure regime. We propose that the role of major crustal faults in overpressured vein fields, independent of tectonic setting, is to drain hydrothermal fluids out of the vein field along a breach across an impermeable layer higher in the crust and above the vein field. This breach is crucial to allow flow out of the vein field and accumulation of metals in the fractures, and this breach has major implications for exploration for mineral resources. We propose that tectonic events that cause episodic metamorphic dehydration create a short-lived pulse of metamorphic fluid to rise along zones of transient permeability. This results in a fluid wave that propagates upward carrying metals to the mineralized area. Earthquakes along crustal shear zones cause dilation near jogs that draw fluids and deposit metals in an interconnected network of subsidiary shear zones. Fluid flow is arrested by an impermeable barrier separating the hydrostatic and lithostatic fluid pressure regimes. Fluids flow through the evolving and interconnected network of shear zones and by advection through the rock matrix. Episodic breaches in the impermeable barrier along the crustal shear zones allow fluid flow out of the vein field.     

The Removal of Dissolved Metals by Hydroxysulphate Precipitates during Oxidation and Neutralization of Acid Mine Waters, Iberian Pyrite Belt

This study examines the removal of dissolved metals during the oxidation and neutralization of five acid mine drainage (AMD) waters from La Zarza, Lomero, Esperanza, Corta Atalaya and Poderosa mines (Iberian Pyrite Belt, Huelva, Spain). These waters were selected to cover the spectrum of pH (2.2–3.5) and chemical composition (e.g., 319–2,103 mg/L Fe; 2.85–33.3 g/L SO₄⁼) of the IPB mine waters. The experiments were conducted in the laboratory to simulate the geochemical evolution previously recognized in the field. This evolution includes two stages: (1) oxidation of dissolved Fe(II) followed by hydrolysis and precipitation of Fe(III), and (2) progressive pH increase during mixing with fresh waters. Fe(III) precipitates at pH < 3.5 (stages 1 and 2) in the form of schwertmannite, whereas Al precipitates during stage 2 at pH 5.0 in the form of several hydroxysulphates of variable composition (hydrobasaluminite, basaluminite, aluminite). During these stages, trace elements are totally or partially sorbed and/or coprecipitated at different rates depending basically on pH, as well as on the activity of the SO₄⁼ anion (which determines the speciation of metals). The general trend for the metals which are chiefly present as aqueous free cations (Pb²⁺, Zn²⁺, Cu²⁺, Cd²⁺, Mn²⁺, Co²⁺, Ni²⁺) is a progressive sorption at increasing pH. On the other hand, As and V (mainly present as anionic species) are completely scavenged during the oxidation stage at pH < 3.5. In waters with high activities (> 10⁻¹) of the SO ₄⁼ ion, some elements like Al, Zn, Cd, Pb and U can also form anionic bisulphate complexes and be significantly sorbed at pH < 5. The removal rates at pH 7.0 range from around 100% for As, V, Cu and U, and 60–80% for Pb, to less than 20% for Zn, Co, Ni and Mn. These processes of metal removal represent a significant mechanism of natural attenuation in the IPB.     

Avalanche Risk During Backcountry Skiing – An Analysis of Risk Factors

Skier-triggered avalanches are the main cause of avalanche accidents in backcountry skiing. The risk of accidents during backcountry skiing was analysed statistically and related to factors such as elevation level, aspect, stability rating and the time of the year. The analysis is based on a database about terrain usage and avalanche accidents from a large heli-skiing operator in Canada, which makes it possible to study the conditional probability of accidents given the recorded pattern of terrain usage. This study shows that the historical risk of accidentally triggering an avalanche greater than size 1 depends highly on the stability rating, with the highest risk occurring during “poor” stability. The risk is greater at high elevations, and it is lower during the late season than earlier on. Skier risk does not depend as much on aspect as may be indicated from avalanche data alone. However, it is relatively high in the N–NE–E sector. These factors are not independent of each other and therefore analyses of combined factors were also performed. Questionnaires and interviews were used to gain knowledge about the terrain selection of professional mountain guides. These results indicate that when selecting terrain, guides first look at the overall shape and size of the terrain, but avalanche history of terrain and inclination are also important factors. Finally, remarks in avalanche reports were analysed, and common human factors identified.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.     

Geometry and accuracy of reflecting points in bistatic satellite altimetry

The analysis of the time and space distribution of specular (reflecting) points in bistatic altimetry between GPS and CHAMP satellites or SAC-C (taken as examples) is extended from Wagner and Klokočník (2003 J. Geod 77: 128–138). We demonstrate a significantly higher number and density of reflecting points in bistatic altimetry in comparison with traditional monostatic altimetry. After an outline of our older accuracy assessment for the vertical position of the reflecting point, we add a new independent derivation and compare both approaches. We account for orbit errors of both the transmitters (GPS) and receiver (CHAMP) satellites, and the measurement (delay) error. We found that the accuracy of the vertical position of the reflecting point decreases only slowly with increasing off-nadir angle and that the orbit errors must be accounted for if decimeter and better accuracy is required. In this paper, we do not study errors such as state of the ocean, technical parameters of the receiving system, and atmospheric corrections.     

Are Natural Climate Forcings Able to Counteract the Projected Anthropogenic Global Warming?

A two-dimensional global climate model is used to assessthe climatic changes associated with the new IPCC SRES emissions scenarios and to determine which kind of changes in total solar irradiance and volcanic perturbations could mask the projected anthropogenic global warming associated to the SRES scenarios. Our results suggest that only extremely unlikely changes in total solar irradiance and/or volcanic eruptions would be able to overcome the simulated anthropogenic global warming over the century. Nevertheless, in the critical interval of the next two decades the externally-driven natural climate variability might possibly confuse the debate about temperature trends and impede detection of the anthropogenic climate change signal.     

Daily Meteorological Observations in Cádiz – San Fernando. Analysis of the Documentary Sources and the Instrumental Data Content (1786–1996)

Meteorological observations in the city of Cádiz are acknowledged as having been made from the middle of the 18th century onwards although they were only recorded and preserved in documentary form from 1789 onwards. Data readings were taken at the new Naval Observatory in San Fernando, ten kilometres from Cádiz, from 1797 onwards. Continuous series for temperature and atmospheric pressure at a daily resolution have been compiled and constructed from 1817 until 1996. The data series is composed of thrice daily observations made at Cádiz (1821–1880) by local observers and hourly data from Naval Observatory at San Fernando (1870–1996).