Physical modeling of buried PVC pipes overlying localized ground subsidence

The last half-century has witnessed a proliferation in the use of polyvinyl chloride (PVC) pipes in civil engineering applications. However, little physical data are available to date to assess conformance with performance limits of these pipes subjected to events involving localized ground subsidence. In this study, experimental results are generated and evaluated from a series of physical models involving a buried PVC pipe overlying a localized subsiding bedding zone. Ground subsidence was simulated using a precisely controlled trapdoor system positioned at mid-length of the pipe. A technique including the use of a custom-made displacement transducer was developed as part of this study to facilitate collection of continuous deflection profiles along the axis of the pipes. The progressive development of soil arching was also monitored using earth pressure sensors placed on the top, sides, and at several locations beneath the pipe, both within and beyond the zone of ground subsidence. Strains in the external wall of the pipe were also monitored. The results indicate that significant bending developed in the portion of the pipe traversing the subsidence zone, especially at the pipe crown. Beyond this point, radial deflections of the pipe cross section continued to be detected along the pipe length to distances of approximately four pipe diameters. Ground subsidence induced a severe redistribution of the earth pressures measured in the soil mass surrounding the pipe. A significant increase in vertical soil pressures beneath the pipe was captured within a distance of about one pipe diameter outside the subsidence zone. The overall response of the PVC pipe to localized ground subsidence was found to improve with increasing backfill density and decreasing soil confinement.

     

Earthquake damage assessment for deterministic scenarios in Iquique,Chile

Risk evaluation and loss analysis is key in foreseeing the impact of disasters caused by natural hazards and may contribute effectively in improving resilience in a community through the pre-evaluation of preparedness and mitigation actions. The pilot study presented herein is for the Chilean city of Iquique, which is located at the core of a seismic gap that extends from south Perú to north Chile, and has strategic geopolitical and economic importance for the country. The region was hit April 1, 2014, by an \(M_\mathrm{w}\) 8.2 earthquake that caused only moderate damage, but seismological evidence suggests that there is still a potential for a much larger event in the region. Therefore, a careful damage assessment study is fundamental to anticipate the possible physical, social, and economic consequences that Iquique may face in the future. In this work, the HAZUS-MH platform was adapted and used to simulate a set of ten plausible physics-based future seismic scenarios with magnitudes ranging from \(M_\mathrm{w}\) 8.40 to \(M_\mathrm{w}\) 8.98, which were proposed based on an analysis of interplate locking and the residual slip potential remaining after the April 1, 2014, earthquake. Successful application of this damage assessment methodology relies on the construction of a comprehensive exposure model that takes into account regional features and a good characterization of the physical vulnerabilities. For Iquique, a large body of public and local data was used to develop a detailed inventory of physical and social assets including an aggregated building count, demographics, and essential facilities. To characterize the response of the built environment to seismic demand, appropriate HAZUS fragility curves were applied, and outcomes were validated against the damage observed in the 2014 earthquake. After satisfactory testing, a deterministic earthquake damage assessment study was carried out for the collection of predictive scenarios aimed to estimate their expected impacts. This analysis provides data for future evaluations of different physical and social mitigation measures for the city.     

Mantle derived crystal-poor rhyolitic ignimbrites: Eruptive mechanism from geochemical and geochronological data of the Piedra Parada caldera,Southern Argentina

Trace elements, isotopic modeling and U-Th-Pb SHRIMP zircon age constraints are used to reconstruct the eruption history and magmatic processes of the Piedra Parada Caldera. In the early Eocene, the crystal-poor Barda Colorada ignimbrite(BCI), having 15% micro-porphyritic crystals with respect to magmatic components, erupted a volume estimated in more than 300 km~3. The Piedra Parada caldera is located in the Patagonian Andes foreland, at the southern end of the calderas field of the Pilcaniyeu Volcanic Belt(PVB). This belt is related to an extensional tectonic setting as a result of the collision of the Farallon-Aluk ridge with South America, which enabled the development of a transform ocean/continental plate margin followed by the detachment of the Aluk plate and the opening of a slab window. The BCI extra-caldera Plateau is a 100 m thick deposit, having a lower unit with high silica(Si O_2 76 wt.%),potassium poor rhyolitic composition(trondhjemitic like magma), and an upper unit with normal to high potassium rhyolitic composition(granitic like magma). A trace elements modeling of the BCI units shows that the BCI lower and upper units did not evolve from fractionation or immiscibility in the shallow magma reservoir. The BCI also have a primitive isotopic signature(initial87 Sr/86 Sr =0.7031-0.7049 and ε_(Nd)= +3.4 to +3.65). Thus, tectonic, compositional and isotopic constraints suggest the fast ascent of high silica magmas to a shallow reservoir, and point to an upper mantle origin for these rhyolitic magmas in a transitional(Orogenic-Anorogenic) tectono-magmatic setting. U-Th-Pb SHRIMP zircon crystallization ages of the Syn-caldera stage BCI units(56 -51.5 Ma) show a protracted life of 5 Ma for this caldera reservoir. The age of 52.9 ± 0.3 Ma is considered the best fit for the possible maximum age for the caldera collapse. The Late-caldera magmatism has trachyandesitic and rhyolitic compositions.The trace element modeling suggests that these rhyolites evolve from the trachyandesites and do not evolve from the BCI residual magma. The trachyandesites have U-Th-Pb SHRIMP zircon crystallization ages of 52 ± 1 Ma, suggesting that the caldera eruption was triggered by the arrival of the trachyandesitic magma.     

Mobility of trace elements between the river water,the sediments,and the pore water of Las Catonas Stream,Buenos Aires Province,Argentina

The composition of river water, sediments, and pore waters (down to 30 cm below the bed) of Las Catonas Stream was studied to analyze the distribution of trace elements in a peri-urban site. The Las Catonas Stream is one of the main tributaries of Reconquista River, a highly polluted water course in the Buenos Aires Province, Argentina. The semi-consolidated Quaternary sediments of the Luján Formation are the main source of sediments for Las Catonas Stream. The coarse-grained fraction in the sediments is mainly composed of tosca (calcretes), intraclasts, bone fragments, glass shards, quartz, and aggregates of fine-grained sediments together with considerably amounts of vegetal remains. The clay minerals are illite, illite–smectite, smectite, and kaolinite. For the clay-sized fraction, the external surface area values are mostly between 70 and 110 m²g^?1, although the fraction at 15 cm below the bottom of the river shows a lower surface area of 12 m²g^?1. The N₂ adsorption–desorption isotherms at 77 K for this sample display a behavior indicative of non-porous or macroporous material, whereas the samples above and below present a typical behavior of mesoporous materials with pores between parallel plates (slit-shaped). As, Cr, Cu, and Cd concentrations increase down to 15 cm depth in the sediments, where the highest trace element and total organic carbon (TOC) concentrations were found, and then decrease toward the bottom of the core. Except for As, the levels of the other heavy metals show higher concentration in surficial waters than in pore waters. Distribution coefficients between the sediments, pore water, and surficial water phases indicate that As is released from the sediments to the pore and surficial waters. Cu content strongly correlates with TOC (mainly from vegetal remains), suggesting that this element is mainly bound to the organic phase.     

Ornamental stone potential areas for land use planning: a case study in a limestone massif from Portugal

Nowadays, the difficulties of the mining sector in accessing the territory are mostly related to inadequate land use plans. Mineral potential maps have become quite relevant for the land use planning authorities as a decision support tool. This work’s goal is to present a methodology based on geological criteria, for the delimitation of potential areas for ornamental stones production in a limestone area of Portugal known as Maciço Calcário Estremenho. This is one of the world’s most important regions producing limestone blocks for ornamental purposes. The methodology, applied at a scale similar to the commonly used in land use planning, considers two main geological-based criteria for the definition of potential areas, namely the homogeneity criterion, related to the textural and chromatic homogeneity of the potentially productive lithologic units, and the dimension criterion, which refers to the thickness of the productive unit, to the volume of the deposit and to its spatial layout. Based on the criteria, two main types of potential areas for ornamental stones’ production were delimited: specific areas, where the lithostratigraphic units demonstrate ornamental suitability at a very local scale due to highly appreciated particular features, and areas corresponding to the entire outcrop area of some of the lithostratigraphic units, which due to the resource volume are the most relevant potential areas.     

Distribution of benthic foraminiferal assemblages in the transitional environment of the Djerba lagoon (Tunisia)

The eastern edge of the Djerba Island represents an important tourist pole. However, studies describing the environmental processes affecting this Island are scarce. Although never studied before, the peculiar Djerba lagoon is well known by the local population and by tourists. In July 2014, surface sediment and seawater samples were collected in this lagoon to measure grain size, organic matter content and living foraminiferal assemblages to describe environmental conditions. Seawater samples were also collected and the concentration of 17 chemical elements were measured by ICP-OES. The results show that a salinity gradient along the studied transect clearly impacts seagrass distribution, creating different environmental conditions inside the Djerba lagoon. Biotic and abiotic parameters reflect a transitional environment from hypersaline to normal marine conditions. Living benthic foraminifera show an adaptation to changing conditions within the different parts of the lagoon. In particular, the presence of Ammonia spp. and Haynesina depressula correlates with hypersaline waters, whilst Brizalina striatula characterizes the parts of the lagoon colonized by seagrass. Epifaunal species, such as Rosalina vilardeboana and Amphistegina spp. colonize hard substrata present at the transition between the lagoon and the open sea.     

Relationship between solar radiation and dimethylsulfide concentrations using in situ data for the pristine region of the southern hemisphere

The biological processes have been proposed as climate variability contributors. Dimethylsulfide (DMS) is the main biogenic sulfur compound in the atmosphere; it is mainly produced by the marine biosphere and plays an important role in the atmospheric sulfur cycle. Currently it is accepted that terrestrial biota not only adapts to environmental conditions but also influences them through regulations of the chemical composition of the atmosphere. In the present study we used a wavelet method to investigate the relationship between DMS, Low cloud cover (LCC), Ultraviolet Radiation A (UVA), Total Solar Irradiance (TSI) and Sea Surface Temperature (SST) in the so called pristine zone of the Southern Hemisphere. We found that the series analyzed have different periodicities which can be associated with large scale climatic phenomena such as El Niño (ENSO) or the Quasi-Biennial Oscillation (QBO), and/or to solar activity. Our results show an intermittent but sustained DMS-SST correlation and a DMSUVA anti correlation; but DMS-TSI and DMS-LCC show nonlinear relationships. The time-span of the series allow us to study only periodicities shorter than 11 years, then we limit our analysis to the possibility that solar radiation influences the Earth climate in periods shorter than the 11-year solar cycle. Our results also suggest a positive feedback interaction between DMS and solar radiation.     

New assessment of organic mercury formation in highly polluted sediments in the Lenga estuary,Chile

Anomalously high levels of mercury in sediment in the Lenga estuary, Chile are comparable to the most contaminated sites previously reported elsewhere. Total mercury (Hg_total) concentrations range from 0.5 to 129 mg kg⁻¹ and organic mercury (Hg_org) from 11 to 53 μg kg⁻¹. The highest levels are in areas near the previous wastewater outfall of a chlo-alkali plant. The results show that the proportion of Hg_org/Hg_total in the sediment varies by more than two orders of magnitude (0.02–5.7%) according to the concentration of Hg_total. No correlation between the concentration of Hg_org and Hg_total was found. The lack of correlation does contrast with the findings of other authors in culture media. Our results indicate that even at very high concentrations of Hg_total and organic matter do not influence organic mercury formation in estuary sediments. The disparity in Hg_total and Hg_org concentrations also attests to environmental differences in the formation.     

Modulation of the flow structure by progressive bedforms in the Kinoshita meandering channel

An in‐house fully three‐dimensional general‐purpose finite element model is applied to solve the hydrodynamic structure in a periodic Kinoshita‐generated meandering channel. The numerical model solves the incompressible Reynolds‐averaged Navier–Stokes equations for mass and momentum, while solving the k ? ε equations for turbulence. The free surface is described by the rigid‐lid approximation (using measured water surface data) for flat (smooth‐bed) and self‐formed (rough‐bed) conditions. The model results are compared against experimental measurements in the ‘Kinoshita channel’, where three‐dimensional flow velocities and turbulence parameters were measured. This validation was carried out for the upstream‐valley meander bend orientation under smooth (flat bed) conditions. After validation, several simulations were carried out to predict the hydrodynamics in conditions where either it was not possible to perform measurements (e.g. applicability of the laboratory acoustic instruments) and to extrapolate the model to other planform configurations. For the flat smooth‐bed case, a symmetric (no skewness) planform configuration was modeled and compared to the upstream‐skewed case. For the self‐formed rough‐bed case, prediction of the hydrodynamics during the progression of bedforms was performed. It appears that the presence of bedforms on a bend has the following effects: (i) the natural secondary flow of the bend is disrupted by the presence of the bedforms, thus depending on the location of the dune, secondary flows might differ completely from the traditional orientation; (ii) an increment on both the bed and bank shear stresses is induced, having as much as 50% more fluvial erosion, and thus a potential increment on the migration rate of the bend. Implications on sediment transport and bend morphodynamics are also discussed in the paper. Copyright © 2013 John Wiley & Sons, Ltd.     

Erosion feature reclamation in urban areas: typical unsuccessful examples from Brazil

Erosion is responsible for environmental degradation in continental and coastal areas with varying degrees of intensity and spatial range. In continental areas, rills and gullies affect urban and non-urban areas and may occur isolated or in groups. In urban areas, many forms of degradation occur, ranging from relief modifications (with runoff and other hydrological changes) to channel and reservoir silting. Other forms of degradation include the destruction of infrastructure items, such as streets, power lines and pipelines. Many mechanical, structural, agricultural, ecological and bioengineering measures can be adopted to control and restore these areas, with various results. In many cases, the applied techniques are unsuccessful and worsen the environmental problems. To illustrate such cases in Brazil, this study examines the adoption of different techniques to restore gullies in the cities of São Pedro, Franca, São Carlos, Casa Branca and Cajuru, in the state of São Paulo. These areas are characterized by sandy geology in a variety of landscapes, and the erosion processes result from natural and anthropogenic conditions. Additionally, Brazil’s coastal area has been affected by erosion, as in Fortaleza (in the state of Ceará). This study demonstrates that the primary factor associated with erosion in coastal and continental urban areas is the lack of territorial planning that considers the geological, hydrological and geotechnical limitations. In some of the studied areas, positive results have been achieved. However, unsatisfactory results predominate primarily because appropriate geological, environmental and geotechnical studies were not performed before the interventions were selected and implemented.