On the effect of the rigid sidewall on the dynamic stiffness of embedded circular footings

The effect of the rigid sidewall, which is usually combined with embedded footings, on the dynamic stiffness of the footings is considered. An efficient numerical technique is used to calculate the static and dynamic stiffness of circular footings embedded in a stratum. The results show that the increase in static stiffness with increasing height of the sidewall is most significant in the case of rocking. The dynamic stiffness coefficients change considerably, if the sidewall extends higher than about half the depth of embedment. The damping coefficients corresponding to vertical vibrations and rocking are likewise affected by the height of the sidewall. The damping coefficients corresponding to torsional and horizontal vibrations increase considerably with increasing height of the sidewall.     

Coastal processes and environmental hazards: the Buenos Aires (Argentina) and Venetian (Italy) littorals

The Buenos Aires (Argentina) and Venice (Italy) coastlands have experienced significant saltwater contamination of the phreatic aquifer, coastal erosion, hydrodynamic changes and relative sea level rise processes due to natural and man-induced factors. These factors expose coastal areas to morpho-hydro-geological hazards, such as soil desertification, frequency and degree of flooding, littoral erosion, and the silting of river mouths and channels. Man-made interventions and actions, such as beach mining, construction of coastal structures and exploitation of aquifers without an adequate knowledge of the hydrology setting and an adequate management program, worsen these natural hazards. Uncontrolled human activity induces environmental damage to the overall coastal plains. The coastal plains play an important role in the social/economic development of the two regions based on land use, such as agriculture, horticulture, breeding, and tourism, as well as industry. Results of investigations on saltwater contamination, sea level rise and morphological changes recently performed in these two coastal areas are presented here.     

Ground motion characterization and seismic hazard assessment in Spain: context,problems and recent developments

This article points out some particular features conditioning seismic hazard assessments (SHA) in Spain, a region with low–moderate seismicity. Although sized earthquakes occurred in the past, as evidenced by historical documents and neotectonic studies, no large events occurred during the last decades. The absence of strong motion records corresponding to earthquakes with magnitude larger than 5.5 is an important obstacle for the development of ground motion models constrained by local data, with the consequent difficulty in SHA studies. In this paper, some recent developments aiming at providing solutions to these difficulties are presented. Specifically, a strong motion databank containing a massive collection of accelerograms and response spectra from different configurations source-path-site corresponding to earthquakes all over the world is introduced, together with software utilities for its management. A first application of this databank is the development of specific ground motion models for Spain and for the Mediterranean region that predict peak ground accelerations as a function of several definitions of magnitude, distance and soil class. The predictive power of these ground motion models is tested by contrasting their estimates with recently recorded ground motions. The comparison between our ground-motion models with others proposed in the literature for other areas reveals a regular overestimation of the expected ground motions at Spanish sites by the non-local models. Consequently, SHA studies based in external models may overestimate the predicted hazard at the Iberian sites. In the last part of the paper a method for checking whether the response spectra proposed in the Spanish Building Code (NCSE-02) are consistent with actual accelerometric data from recent low magnitude earthquakes is applied. The spectral shapes of the Spanish Building Code NCSE-02 are compared with the response spectral shapes deduced from the available accelerograms by normalising the response spectra with the recorded PGA. It is appreciated that the NCSE-02 spectral shapes are exceeded by a large number of actual spectral shapes for short periods (around 0.2 s), a result to be taken into account in further revisions of the NCSE-02 code. The issues tackled in this work constitute not only an improvement for ground-motion characterisation in Spain, but also provide guidelines of general interest for potential applications in other regions with similar seismicity.     

Morphology of the Itapeva to Tramandai transgressive dunefield barrier system and mid‐ to late Holocene sea level change

The surface morphology of the transgressive dunefield barrier extending from Itapeva to Tramandai along the northern littoral of Rio Grande do Sul, is examined and an attempt is presented to link morphological changes across the barrier to Holocene sea level changes. The 4·5 km wide Holocene barrier displays two typical morphologies: an inner part dominated by large‐scale, continuous alongshore, overlapping dunefield phases comprising sand sheets, dunes, deflation plains and precipitation ridges; and an outer part dominated by discontinuous, medium‐ to small‐scale, triangular to lobate transgressive dunefield phases, cut by both active and relict (palaeo‐) creeks or washouts. Holocene sea level in the region rose to c. +1 to +3 m above present reaching a maximum around 5100 years bp and then progressively fell to the present level. We argue that the effect on barrier development was to suppress the development of a drainage system during the rising and maximum stages, and encourage the development of an organized drainage system in the form of regularly spaced washouts during the falling period, and that this change in sea level from rising to falling therefore produced the large‐scale differences in barrier morphology. Copyright © 2006 John Wiley & Sons, Ltd.     

Peralkaline acid tendencies in Gran Canaria (Canary Islands)

The study of a volcanic series from the island of Gran Canaria (Canary Islands) in which alkaline and peralkaline, saturated and undersaturated rocks coexist, is reported here. Materials with high volatile content (ignimbritic trachytes) were first emitted and the series ended with the eruption of phonolitic lavas. The average peralkalinity index in these rocks is typically about 1.0 and, therefore, peralkaline rocks coexist with non-peralkaline ones. However, a maximum in peralkalinity is found in the ignimbritic rocks of the lower part of the series. In spite of the evident acid peralkaline tendencies of these rocks, it does not seem appropriate to classify them as pantellerites or comendites. Nor are they consistent with the genetic processes proposed for rocks of similar composition and oceanic environment.The crystallization of the feldspars controls the variation trends among the different magmas but the fractionation alone does not sufficiently explain the genesis of successive fluids. Various factors seem to point to the important role which a gas-transfer process causing a geochemical stratification inside the magmatic chamber may have played.The occurrence of peralkaline silicics at Gran Canaria, which is located for away from the active Mid-Atlantic ridge, is not related to transitional basalts. These rocks are a deviation from the main undersaturated alkalic trend which characterizes the volcanism of the Canary Islands, their genesis being related to the realization of favourable local volcanic conditions.     

Cretaceous stratigraphy and palaeoenvironments of the Southern Petén Basin, Guatemala

The Cretaceous deposits of the Southern Petén Basin, an oil-producing province, are located to the south of the Yucatan Platform and to the east of the Chiapas Carbonate Platform of Mexico. The succession in the southern part of this basin has been studied both in wells and at outcrop by microfacies analysis. It is composed of 5000 m of shallow marine carbonates and evaporites with a few thin layers of pelagic limestones rich in organic carbon and planktic foraminifera deposited during peak transgressions or maximum flooding. The sedimentation of this thick succession was not continuous, and the section is punctuated by subaerial erosional bounding surfaces and a single hardground which marks the final drowning of the carbonate platform during the late Maastrichtian. New age determinations have been obtained on the basis of planktic and benthic foraminifera from the Aptian to Santonian Cobán Formation, D, C, B and A Members. Cobán C (Albian) and B (Cenomanian) Members are the present oil reservoirs. The rudist and alveolinid limestones of late Campanian and Maastrichtian age referred to the Campur Formation in the Southern Petén Basin are here reassigned to the Angostura Formation, as recognized in the Chiapas area. The Actela Formation is defined here to encompass the limestone breccia deposits that occur at the Cretaceous–Tertiary boundary and extend into the Parvularugoglobigerina eugubina Zone of early Danian age. The D, C, B and A Members of the Cobán Formation and the Angostura Formation represent second order transgressive and regressive trends in a passive margin area where the deposits indicate a succession of various environments, including fluviatile, salinas, shallow marine carbonate platform, outer shelf and intrashelf basin. High subsidence rates, sea-level changes and tectonic uplift controlled the sedimentation.

Abstract

Les formations crétacées du sud-est du Bassin du Petén, région pétrolière du nord du Guatemala, sont situées au Sud du Yucatan et à l'Est du Chiapas au Mexique. Ces sédiments ont été étudiés à la fois dans deux puits et à l'affleurement par l'analyse des microfaciès. Cet ensemble sédimentaire est composé de 5000 m de carbonates de plate-forme de faible profondeur et d'évaporites, dans lesquels s'intercalent de minces couches de calcaires pélagiques riches en matière organique et en foraminifères planctoniques. Ces calcaires pélagiques se sont déposés lors des maximums de transgressions. La sédimentation de cette épaisse série n'est pas continue et est ponctuée par quelques surfaces d'érosion sub-aérienne et une surface durcie qui souligne l'ennoyage définitif de la plate-forme carbonatée au Maastrichtien terminal. De nouvelles datations ont été obtenues sur la formation Cobán et ses membres D, C, B et A qui s'étagent de l'Aptien au Santonien. Les membres C (albien) et B (cénomanien) constituent les réservoirs productifs. Les calcaires à rudistes et à alveolinidés du Campanien supérieur–Maastrichtien ont été appelés à tort au Petén formation Campur. Ils doivent, selon nous, être attribués à la formation Angostura comme au Chiapas voisin, où affleurent des faciès comparables et de même âge. Une nouvelle formation est créée (formation Actela) pour les brèches calcaires de la limite Crétacé–Tertiaire et de la Zone à Eugubina du Danien inférieur. Les membres D, C, B, A de la formation Cobán et la formation Angostura représentent des cycles transgressifs–régressifs de deuxième ordre. Sur cette marge passive du Petén, les dépôts correspondent à des environnements variés comme des terres émergées soumises à une altération karstique et à des dépôts fluviatiles, des salinas, des plates-formes carbonatées marines, des shelf externes et des bassins intra plate-forme. La sédimentation a été, ici, contrôlée par une forte vitesse de subsidence, les variations du niveau marin et des soulèvements tectoniques.     

Stable isotope (C,O, S) systematics of the mercury mineralization at Idrija,Slovenia: constraints on fluid source and alteration processes

The world-class Idrija mercury deposit (western Slovenia) is hosted by highly deformed Permocarboniferous to Middle Triassic sedimentary rocks within a complex tectonic structure at the transition between the External Dinarides and the Southern Alps. Concordant and discordant mineralization formed concomitant with Middle Triassic bimodal volcanism in an aborted rift. A multiple isotopic (C, O, S) investigation of host rocks and ore minerals was performed to put constraints on the source and composition of the fluid, and the hydrothermal alteration. The distributions of the ¹³C and ¹⁸O values of host and gangue carbonates are indicative of a fracture-controlled hydrothermal system, with locally high fluid-rock ratios. Quantitative modeling of the ¹³C and ¹⁸O covariation for host carbonates during temperature dependent fluid-rock interaction, and concomitant precipitation of void-filling dolomites points to a slightly acidic hydrothermal fluid (¹³C–4 and ¹⁸O+10), which most likely evolved during isotopic exchange with carbonates under low fluid/rock ratios. The ³⁴S values of hydrothermal and sedimentary sulfur minerals were used to re-evaluate the previously proposed magmatic and evaporitic sulfur sources for the mineralization, and to assess the importance of other possible sulfur sources such as the contemporaneous seawater sulfate, sedimentary pyrite, and organic sulfur compounds. The ³⁴S values of the sulfides show a large variation at deposit down to hand-specimen scale. They range for cinnabar and pyrite from –19.1 to +22.8, and from –22.4 to +59.6, respectively, suggesting mixing of sulfur from different sources. The peak of ³⁴S values of cinnabar and pyrite close to 0 is compatible with ore sulfur derived dominantly from a magmatic fluid and/or from hydrothermal leaching of basement rocks. The similar stratigraphic trends of the ³⁴S values of both cinnabar and pyrite suggest a minor contribution of sedimentary sulfur (pyrite and organic sulfur) to the ore formation. Some of the positive ³⁴S values are probably derived from thermochemical reduction of evaporitic and contemporaneous seawater sulfates.Editorial handling: P. Lattanzi