Cobble cam: grain‐size measurements of sand to boulder from digital photographs and autocorrelation analyses

A new application of the autocorrelation grain size analysis technique for mixed to coarse sediment settings has been investigated. Photographs of sand‐ to boulder‐sized sediment along the Elwha River delta beach were taken from approximately 1·2 m above the ground surface, and detailed grain size measurements were made from 32 of these sites for calibration and validation. Digital photographs were found to provide accurate estimates of the long and intermediate axes of the surface sediment (r² > 0·98), but poor estimates of the short axes (r² = 0·68), suggesting that these short axes were naturally oriented in the vertical dimension. The autocorrelation method was successfully applied resulting in total irreducible error of 14% over a range of mean grain sizes of 1 to 200 mm. Compared with reported edge and object‐detection results, it is noted that the autocorrelation method presented here has lower error and can be applied to a much broader range of mean grain sizes without altering the physical set‐up of the camera (～200‐fold versus ～6‐fold). The approach is considerably less sensitive to lighting conditions than object‐detection methods, although autocorrelation estimates do improve when measures are taken to shade sediments from direct sunlight. The effects of wet and dry conditions are also evaluated and discussed. The technique provides an estimate of grain size sorting from the easily calculated autocorrelation standard error, which is correlated with the graphical standard deviation at an r² of 0·69. The technique is transferable to other sites when calibrated with linear corrections based on photo‐based measurements, as shown by excellent grain‐size analysis results (r² = 0·97, irreducible error = 16%) from samples from the mixed grain size beaches of Kachemak Bay, Alaska. Thus, a method has been developed to measure mean grain size and sorting properties of coarse sediments. Copyright © 2009 John Wiley & Sons, Ltd.     

When hazard avoidance is not an option: lessons learned from monitoring the postdisaster Oso landslide,USA

On 22 March 2014, a massive, catastrophic landslide occurred near Oso, Washington, USA, sweeping more than 1 km across the adjacent valley flats and killing 43 people. For the following 5 weeks, hundreds of workers engaged in an exhaustive search, rescue, and recovery effort directly in the landslide runout path. These workers could not avoid the risks posed by additional large-scale slope collapses. In an effort to ensure worker safety, multiple agencies cooperated to swiftly deploy a monitoring and alerting system consisting of sensors, automated data processing and web-based display, along with defined communication protocols and clear calls to action for emergency management and search personnel. Guided by the principle that an accelerating landslide poses a greater threat than a steadily moving or stationary mass, the system was designed to detect ground motion and vibration using complementary monitoring techniques. Near real-time information was provided by continuous GPS, seismometers/geophones, and extensometers. This information was augmented by repeat-assessment techniques such as terrestrial and aerial laser scanning and time-lapse photography. Fortunately, no major additional landsliding occurred. However, we did detect small headscarp failures as well as slow movement of the remaining landslide mass with the monitoring system. This was an exceptional response situation and the lessons learned are applicable to other landslide disaster crises. They underscore the need for cogent landslide expertise and ready-to-deploy monitoring equipment, the value of using redundant monitoring techniques with distinct goals, the benefit of clearly defined communication protocols, and the importance of continued research into forecasting landslide behavior to allow timely warning.

     

Floodgate Operations and Fish Communities in Tidal Creeks of the Lower Fraser River (British Columbia,Canada)

Tidal creeks in large coastal deltas can be important habitat for fish but are often highly modified by human activities. Connectivity between tributary creeks and mainstem channels is often constrained by structures such as dikes and floodgates, designed to protect urban and agricultural areas from flooding. While they play important roles in flood mitigation, floodgates can diminish habitat quality and block fish from accessing tidal creeks. It is likely that floodgates differ in their operations and may consequently open for different amounts of time; however, floodgate operations and their effects are not well quantified. We asked the question: how does the mechanical functioning of these floodgates affect fish communities in tidal creeks? We used time-lapse cameras and quantified the timing of gate openings for 22 tributaries of the Lower Fraser River in British Columbia, Canada, and related these operational data to differences in fish communities above and below floodgates. Floodgate operations varied substantially, with some floodgates opening daily while others opened less than 20% of the day, on average. Sites with floodgates that seldom opened were associated with greater differences in fish communities and with reduced upstream native species richness by about one species on average. Where floodgates opened infrequently, we also found lower upstream dissolved oxygen concentrations than at sites where floodgates opened for longer periods of time. Thus, floodgate operations can influence fish communities as well as water quality. These data indicate a large scope for improving floodgate operations for connectivity.     

Coastal erosion vs man-made protective structures: evaluating a two-decade history from southeastern India

Remote sensing images of AD 1991–2011 and field observations help evaluate shoreline changes (erosion and accretion) in Puducherry and Tamil Nadu states of southeastern India. A minor harbor was constructed during AD 1986–1989 in the coast of Puducherry, and it initiated the gradual process of shoreline modification. In the subsequent years, beaches located toward the north of the harbor suffered erosion (?0.12–?4.19 m/year) and there was accretion (0.27–7.25 m/year) in the southern beaches. However, the man-made structures (seawall and groin) have reduced the shoreline changes after AD 2004. In the last two decades, the rate of erosion area-wise gradually decreased (0.24–0.013 km²/year) and accretion remained constant (0.019 km²/year). Our results suggest that accretion happened in the southern side of the breakwaters and erosion occurred in the northern part. Presence of groins structures in the region in the northern part has also provoked accretion in the south and erosion in the northern side close to the State of Tamil Nadu.

     

Relations between hydrology and velocity of a continuously moving landslide—evidence of pore-pressure feedback regulating landslide motion?

We measured displacement, pore-water pressure, and climatic conditions for 3 years at the continuously moving Slumgullion landslide in Colorado, USA. The landslide accelerated when pore-water pressure increased within the landslide body, but this occurred as pore-water pressure decreased along the landslide margin. The decrease probably occurred in response to shear-induced soil dilation at rates greater than pore-pressure diffusion and likely increased resistance to shear displacement and resulted in landslide deceleration. This dilative strengthening has been experimentally observed and explained theoretically, but not previously identified during field studies. Although landslide displacement should have exceeded that required to achieve critical-state density of shear boundaries, observed relocation of these boundaries indicates that shearing is episodic at fixed locations, so it permits renewed dilative strengthening when “fresh” soil is sheared. Thus, dilatant strengthening may be a considerable mechanism controlling landslide velocity, even for landslides that have continuously moved great distances.     

Trace element zoning in pyroxenes from ODP Hole 735B gabbros: diffusive exchange or synkinematic crystal fractionation?

Major and trace element profiles of clinopyroxene grains in oceanic gabbros from ODP Hole 735B have been investigated by a combined in situ analytical study with ion probe, and electron microprobe. In contrast to the homogeneous major element compositions, trace elements (REE, Y, Cr, Sr, and Zr) show continuous core to rim zoning profiles. The observed trace element systematics in clinopyroxene cannot be explained by a simple diffusive exchange between melts and gabbros along grain boundaries. A simultaneous modification of the melt composition is required to generate the zoning, although Rayleigh fractional crystallization modelling could mimic the general shape of the profiles. Simultaneous metasomatism between the cumulate crystal and the porous melt during crystal accumulation is the most likely process to explain the zoning. Deformation during solidification of the crystal mush could have caused squeezing out of the incompatible element enriched residual melts (interstitial liquid). Migration of the melt along grain boundaries might carry these melt out of the system. This process named as synkinematic differentiation or differentiation by deformation (Natland and Dick in J Volcanol Geotherm Res 110(3–4):191–233, 2001) may act as an important magma evolution mechanism in the oceanic crust, at least at slow-spreading ridges.     

Enrichment pattern of leachable trace metals in roadside soils of Miri City,Eastern Malaysia

This article presents the results on distribution and enrichment pattern of acid-leachable trace metals (ALTMs) from roadside soil of Miri city, Sarawak, East Malaysia. The city is one of the fastest developing in the Malaysian region with huge petroleum resources. ALTMs Fe, Mn, Cr, Cu, Ni, Co, Pb, Zn and Cd along with organic carbon and carbonates (CaCO₃) were analyzed in 37 soil sediments collected from roadside. The enrichment of ALTMs [especially Cu (0.4–13.1 μg g^?1), Zn (9.3–70.7 μg g^?1), Pb (13.8–99.1 μg g^?1)] in the roadside soils indicate that these metals are mainly derived from sources related to traffic exhausts, forest fires and oil refineries. The comparative study and enrichment pattern of elements indicates that Mn, Cu, Zn and Pb are enriched multi-fold than the unpolluted soil and Ni, Pb, Cd in some samples compared to Sediment Quality Guidelines like Lowest Effect Level (LEL) and Effects Range Low (ERL) in the region which is mainly due to the recent industrial developments in the region.     

Ethnic enterprises and community development

Ethnic enterprises are growing rapidly in urban areas across the United States. Anecdotal evidence from around the country reports many success stories of how ethnic businesses transform communities; however, researchers have not provided a systematic review of the role of ethnic businesses in community developing. In practice, ethnic businesses have not been formally incorporated in local planning and development process. This article provides a systematic review of the multi-faceted ways ethnic businesses contribute to community building and neighborhood development. In addition to surveying the current literature, we also chose three communities for a focused review: Buford Highway in Atlanta, Monterey Park in Los Angeles, and Sunset Park in New York. A framework is developed to evaluate the economic, physical, social/cultural, and political effects that ethnic businesses exert on communities. We find that ethnic businesses can serve local economic interests and community-level cohesion and accrue economic, social, physical, and political benefits to their respective communities. These include serving the unmet market needs of certain neighborhoods and households, creating job opportunities and generating revenues, revitalizing and fueling the commercial development of abandoned communities, organizing and promoting social life and cultural diversity, as well as contributing their collective interest and voice in local communities. We argue that ethnic businesses should be better incorporated into urban policies in community economic development.     

Short-term and seasonal variation in metabolic balance in Liverpool Bay

Regions of freshwater influence (ROFIs) are dynamic areas within the coastal seas that experience cycles of stability driven by density gradients and the spring-neap tidal cycle. As a result, pulses of biological production may occur on a more frequent timescale than the classic seasonal cycle. Net community production (NCP) rates and chlorophyll a concentration are presented from a site within the ROFI of Liverpool Bay and compared to similar measurements made at a site outside the ROFI during 2009. The influence of water column stability on biological production in the ROFI was also investigated using high-frequency observations from a Cefas Smartbuoy. Both sites were autotrophic from spring to autumn before becoming heterotrophic over winter. NCP at the inshore site was estimated to range from 30.8 to 50.4 gC m⁻² year⁻¹. A linear relationship detected between chlorophyll a and NCP from both sites was used to estimate metabolic balance over 1 year at the ROFI site using high-resolution chlorophyll a concentrations from the Smartbuoy but was found to poorly replicate NCP rates compared to those derived from dissolved oxygen fluxes. There was no clear biological response to periods of stratification within the ROFI, and it is proposed that changes in light attenuation in the Liverpool Bay ROFI, driven not only by stratification but also by fluctuations in riverine sediment load, most likely play an important role in controlling phytoplankton growth in this region.