Pushover and nonlinear time history analysis evaluation of a RC building collapsed during the Van (Turkey) earthquake on October 23, 2011

The nonlinear seismic behavior of a collapsed reinforced concrete (RC) residential building in the city of Van in Turkey is investigated by the static pushover and nonlinear time history analyses. The selected RC structure was designed according to the 1975 version of Turkish Earthquake Code (TEC-1975). The building had experienced heavy damage, and it was demolished in the Van earthquake on October 23, 2011. The 2007 version of Turkish Earthquake Code (TEC-2007) is considered for the assessing seismic performance evaluation of the selected RC building. The RC structure presents collapse performance level under the earthquake loads. Besides, the analytical solutions show that different performance levels for the sections are obtained from the pushover and nonlinear time history methods.     

Hedonic price models with omitted variables and measurement errors: a constrained autoregression–structural equation modeling approach with application to urban Indonesia

Omitted variables and measurement errors in explanatory variables frequently occur in hedonic price models. Ignoring these problems leads to biased estimators. In this paper, we develop a constrained autoregression–structural equation model (ASEM) to handle both types of problems. Standard panel data models to handle omitted variables bias are based on the assumption that the omitted variables are time-invariant. ASEM allows handling of both time-varying and time-invariant omitted variables by constrained autoregression. In the case of measurement error, standard approaches require additional external information which is usually difficult to obtain. ASEM exploits the fact that panel data are repeatedly measured which allows decomposing the variance of a variable into the true variance and the variance due to measurement error. We apply ASEM to estimate a hedonic housing model for urban Indonesia. To get insight into the consequences of measurement error and omitted variables, we compare the ASEM estimates with the outcomes of (1) a standard SEM, which does not account for omitted variables, (2) a constrained autoregression model, which does not account for measurement error, and (3) a fixed effects hedonic model, which ignores measurement error and time-varying omitted variables. The differences between the ASEM estimates and the outcomes of the three alternative approaches are substantial.     

Lateglacial ice dynamics of the Cordilleran Ice Sheet in northern British Columbia and southern Yukon Territory: retreat pattern of the Liard Lobe reconstructed from the glacial landform record

The Liard Lobe formed a part of the north‐eastern sector of the Cordilleran Ice Sheet and drained ice from accumulation areas in the Selwyn, Pelly, Cassiar and Skeena mountains. This study reconstructs the ice retreat pattern of the Liard Lobe during the last deglaciation from the glacial landform record that comprises glacial lineations and landforms of the meltwater system such as eskers, meltwater channels, perched deltas and outwash fans. The spatial distribution of these landforms defines the successive configurations of the ice sheet during the deglaciation. The Liard Lobe retreated to the west and south‐west across the Hyland Highland from its local Last Glacial Maximum position in the south‐eastern Mackenzie Mountains where it coalesced with the Laurentide Ice Sheet. Retreat across the Liard Lowland is evidenced by large esker complexes that stretch across the Liard Lowland cutting across the contemporary drainage network. Ice margin positions from the late stage of deglaciation are reconstructed locally at the foot of the Cassiar Mountains and further up‐valley in an eastern‐facing valley of the Cassiar Mountains. The presented landform record indicates that the deglaciation of the Liard Lobe was accomplished mainly by active ice retreat and that ice stagnation played a minor role in the deglaciation of this region. Copyright © 2013 John Wiley & Sons, Ltd.     

The 150d Modulation of the X-ray Emission of CYG X-1

The X-ray observations of Cyg X-1, covering a period of 3.8 years, by the All Sky Monitor (ASM) on board the Rossi X-ray Timing Explorer (RXTE) were analysed to search for long periodicities. The periodicities in the original data were seen to be distorted by the high/soft state and the failed state counts of the system, and thus the power spectra showed two unrealistic peaks at 1608and 406 days. The ∼ 300 day modulation reported previously(e.g. Priedhorsky et al. 1983) is not confirmed by the present ASM data. Truncation of the high counts above 30 cnts/s partly eliminates the distortion and reveals the true period of 150^d in the power spectra. It is interesting that the high/soft state (HS) and the failed state transitions (FST) always occur on the maximum phase of the150^d cycle. This revised version was published online in July 2006 with corrections to the Cover Date.     

Palaeosurfaces in central West Greenland as reference for identification of tectonic movements and estimation of erosion

Landform analysis of basement rocks has been undertaken with the aid of digital elevation data, aerial photographs and field observations in central West Greenland (69°15′N–66°00′N). Palaeosurfaces have been identified, dated relatively to each other, used to quantify uplift and fault movements and also used to estimate differential erosion. Two types of palaeosurfaces were mapped across the Precambrian basement: a surface at low elevation with distinct hills (hilly relief), and two planation surfaces formed across different types of basement rocks. The hilly relief surface emerges as an inclined surface from Cretaceous cover rocks in Disko Bugt and is interpreted as a stripped late Mesozoic etch surface. This surface is cut off towards the south by a less inclined planation surface, which is younger and thus of Cenozoic age. It is similar to the post-Eocene (Miocene?) planation surfaces identified on Disko and Nuussuaq in other studies. The planation surface splits in two southwards towards high areas around Nordre Isortoq and Sukkertoppen Ice Cap. The upper planation surface forms near-summit areas of tectonic blocks dipping in different directions and with different tilts. The uplift centres define the crests of two mega blocks, separated by the ‘Sisimiut Line’ which coincides with the Precambrian Ikertôq thrust zone. A partially developed lower planation surface indicates a first uplift of maximum 500 m followed by a second uplift of maximum 1000 m. We infer that these uplift events occurred during the late Neogene based on correlation with similar surfaces on Nuussuaq and the timing of exhumational events estimated from apatite fission track analyses of samples from a deep borehole on Nuussuaq (reported elsewhere). The difference between a reconstruction of the upper planation surface across the entire area and the present topography was used as an estimate of erosion of basement rock since the formation of the upper planation surface. The erosion is unevenly distributed and varies from almost none on the well-preserved planation surfaces to 800–1300 m along valleys, and even more in the fjords. Erosion is less within areas of gneiss in granulite facies, than in areas of gneiss in amphibolite facies.     

Prospects for the GLAS Rayleigh laser beacon on the 4.2-m WHT

The scientific exploitation of adaptive optics (AO) with natural guide stars is severely constrained by the limited presence of bright guide stars for wavefront sensing. Use of a laser beam as an alternative means to provide a source for wavefront sensing has the potential of drastically improving the sky coverage for AO. For this reason at the 4.2-m William Herschel Telescope a project was started to develop a Rayleigh laser beacon to work together with the existing NAOMI adaptive optics instrumentation and the OASIS integral field spectrograph. This paper presents the rationale for this development, highlights some of the technical aspects, and gives some expected performance measures.     

The colours of the Sun

We compile a sample of Sun-like stars with accurate effective temperatures, metallicities and colours (from the ultraviolet to the near-infrared). A crucial improvement is that the effective temperature scale of the stars has recently been established as both accurate and precise through direct measurement of angular diameters obtained with stellar interferometers. We fit the colours as a function of effective temperature and metallicity, and derive colour estimates for the Sun in the Johnson–Cousins, Tycho, Strömgren, 2MASS and SDSS photometric systems. For  ( B − V )_⊙  , we favour the 'red' colour 0.64 versus the 'blue' colour 0.62 of other recent papers, but both values are consistent within the errors; we ascribe the difference to the selection of Sun-like stars versus interpolation of wider colour– T _eff–metallicity relations.     

An implementation ofN-body chain regularization

The chain regularization method (Mikkola and Aarseth 1990) for high accuracy computation of particle motions in smallN-body systems has been reformulated. We discuss the transformation formulae, equations of motion and selection of a chain of interparticle vectors such that the critical interactions requiring regularization are included in the chain. The Kustaanheimo-Stiefel (KS) coordinate transformation and a time transformation is used to regularize the dominant terms of the equations of motion. The method has been implemented for an arbitrary number of bodies, with the option of external perturbations. This formulation has been succesfully tested in a generalN-body program for strongly interacting subsystems. An easy to use computer program, written inFortran, is available on request.