Observing Entrainment Processes Using a Small Unmanned Aerial Vehicle: A Feasibility Study

Measurement flights with the meteorological mini aerial vehicle (M $^2$ AV) were performed in spring 2011 to assess the capability of an unmanned aerial vehicle (UAV) to measure the structure of the transition zone between the convective boundary layer and the stably stratified free atmosphere. The campaign took place at the Meteorological Observatory Lindenberg/Richard-Aßmann-Observatory of the German Meteorological Service. Besides the M $^2$ AV flights, observations were made from a 12-m and a 99-m tower, a sodar, two ceilometers, radiosondes, and a tethered balloon with sensor packages at six different levels. M $^2$ AV measurements were intentionally combined with remote sensing systems. The height range of the entrainment zone as well as its diurnal cycle were provided by the remote sensing instruments. The UAV provided the high-resolution in situ data of temperature and wind for the study of turbulent processes. It is shown that the M $^2$ AV is able to maintain constant altitude with very small deviations—a pre-requisite to study processes inside the often quite thin entrainment zone and that M $^2$ AV high-resolution wind and temperature measurements allow for very detailed studies of the fine structure of the atmosphere and thus for the identification of quite local and/or short-duration processes such as overshooting thermals or downward intrusions of warm air. Spatial series measured by the M $^2$ AV during horizontal flights show turbulent exchange of heat in short turbulent bursts at heights close to and within the entrainment zone. Scaled vertical profiles of vertical velocity, potential temperature variance, and sensible heat flux confirm the general shape found by previous measurements and numerical studies.     

Holocene environmental reconstruction from deltaic deposits in northeast Greenland

Terraces of different age in the Zackenberg delta, located at 74°N in northeast Greenland, have provided the opportunity for an interdisciplinary approach to the investigation of Holocene glacial, periglacial, pedological, biological and archaeological conditions that existed during and after delta deposition. The raised Zackenberg delta accumulated mainly during the Holocene Climatic Optimum, starting slightly prior to 9500 cal. yr BP (30 m a.s.l.) and continued until at least 6300 cal. yr BP (0.5 m a.s.l.). Evidence of sea‐level change is based on conventional ¹⁴C dates of shells from the marine delta bottomsets, ¹⁴C AMS dating of macroscopic plant material from the foresets and of fluvial deposits. Arthropod and plant remains from 7960 cal. yr BP in the delta foresets include the oldest evidence of the arctic hare in Greenland and evidence of a rich herb flora slightly different from the modern flora. Empetrum nigrum and Salix herbacea remains indicate a summer temperature at least as high as today during delta deposition. Post‐depositional nivation activity, dated by luminescence, lichenometry and Schmidt Hammer measurements indicate mainly late Holocene activity, at least since 2900 yr BP, including Little Ice Age (LIA) avalanche activity. Pedological analyses of fossil podsols in the Zackenberg delta, including ¹⁴C AMS dating of selected organic rich B‐horizons, show continued podsol development during the Holocene Climatic Optimum and into the subsequent colder period of the late Holocene, until 3000–2400 yr BP. A Neo‐Eskimo house ruin found on the lower part of the delta, presently being eroded by the sea, is dated to AD 1800. It presumably was abandoned prior to AD 1869, and suggests that some of the last Eskimos that lived in northeast Greenland might have occupied the Zackenberg delta. Copyright © 2002 John Wiley & Sons, Ltd.     

Detection of PAHs in seawater using surface-enhanced Raman scattering (SERS)

The laboratory characterization of a field-operable surface-enhanced Raman scattering sensor (SERS optode) is presented for the detection of aromatic hydrocarbons in seawater. The sensor has been developed for deployment with a robust underwater spectrograph. To meet the demands of the harsh seawater application, sol-gel derived SERS substrates were used. The calibration curves of six PAHs were determined to be of Langmuir adsorption isotherm type with limits of detection ranging from the microg l(-1) to ng l(-1) level. The experimentally determined adsorption constants varied strongly with the molecular weight of the analytes and correlated with their solubility. A mixture of five PAHs dissolved in seawater was investigated to demonstrate the utility of this method for screening. Emphasis was put on the interference from suspended particulate matter (SPM). The Raman measurement with backscattering configuration was shown to be immune against turbidities up to 1000 NTU. The physico-chemical interference arising from adsorption by the sediment was measured on-line by adding sediment to a PAH-spiked solution. According to the calibration curve, the PAH concentration decrease corresponded to more than 98% of the analyte being scavenged by the sediment.     

Direct measurements of volume transports through Fram Strait

Heat and freshwater transports through Fram Strait are understood to have a significant influence on the hydrographic conditions in the Arctic Ocean and on water mass modifications in the Nordic seas. To determine these transports and their variability reliable estimates of the volume transport through the strait are required. Current meter moorings were deployed in Fram Strait from September 1997 to September 1999 in the framework of the EU MAST III Variability of Exchanges in the Northern Seas programme. The monthly mean velocity fields reveal marked velocity variations over seasonal and annual time scales, and the spatial structure of the northward flowing West Spitsbergen Current and the southward East Greenland Current with a maximum in spring and a minimum in summer. The volume transport obtained by averaging the monthly means over two years amounts to 9.5 ± 1.4 Sv to the north and 11.1 ± 1.7 Sv to the south (1 Sv = 10⁶ m³s⁻¹). The West Spitsbergen Current has a strong barotropic and a weaker baroclinic component; in the East Greenland Current barotropic and baroclinic components are of similar magnitude. The net transport through the strait is 4.2 ± 2.3 Sv to the south. The obtained northward and southward transports are significantly larger than earlier estimates in the literature; however, within its range of uncertainty the balance obtained from a two year average is consistent with earlier estimates.     

Using snakes for the registration of topographic road database objects to ALS features

For historical reasons many national mapping agencies store their topographic data in a dual system consisting of a Digital Landscape Model (DLM) and a Digital Terrain Model (DTM). The DLM contains 2D vector data representing objects on the Earth’s surface, such as roads and rivers, whereas the DTM is a 2.5D representation of the related height information, often acquired by Airborne Laser Scanning (ALS). Today, many applications require reliable 3D topographic data. Therefore, it is advantageous to convert the dual system into a 3D DLM. However, as a result of different methods of acquisition, processing, and modelling, the registration of the two data sets often presents difficulties. Thus, a straightforward integration of the DTM and DLM might lead to inaccurate and semantically incorrect 3D objects.In this paper we propose a new method for the fusion of the two data sets that exploits parametric active contours (also called snakes), focusing on road networks. For that purpose, the roads from a DLM initialise the snakes, defining their topology and their internal energy, whereas ALS features exert external forces to the snake via the image energy. After the optimisation process the shape and position of the snakes should coincide with the ALS features. With respect to the robustness of the method several known modifications of snakes are combined in a consistent framework for DLM road network adaptation. One important modification redefines the standard internal energy and thus the geometrical model of the snake in order to prevent changes in shape or position not caused by significant features in the image energy. For this purpose, the initial shape is utilized creating template-like snakes with the ability of local adaptation. This is one crucial point towards the applicability of the entire method considering the strongly varying significance of the ALS features. Other concepts related to snakes are integrated which enable our method to model network and ribbon-like characteristics simultaneously. Additionally, besides ALS road features information about context objects, such as bridges and buildings, is introduced as part of the image energy to support the optimisation process. Meaningful examples are presented that emphasize and evaluate the applicability of the proposed method.     

High temperature alteration minerals and thermal brines,Reykjanes, Iceland

The geothermal area on Reykjanes, Iceland has been investigated mineralogically. The temperature within the studied area is very variable from 30–300° C. Mineral zones corresponding to the temperature conditions in the area are found. Accidental changes in the geothermal system are also reflected in the mineralogy by formation of anhydrite. Changes in temperature conditions in the field are indicated by epidote occurrence at 40° C and retrograd formation of montmorillonite.     

Controls on the lateral channel-migration rate of braided channel systems in coarse non-cohesive sediment

Lateral movements of alluvial river channels control the extent and reworking rates of alluvial fans, floodplains, deltas, and alluvial sections of bedrock rivers. These lateral movements can occur by gradual channel migration or by sudden changes in channel position (avulsions). Whereas models exist for rates of river avulsion, we lack a detailed understanding of the rates of lateral channel migration on the scale of a channel belt. In a two-step process, we develop here an expression for the lateral migration rate of braided channel systems in coarse, non-cohesive sediment. On the basis of photographic and topographic data from laboratory experiments of braided channels performed under constant external boundary conditions, we first explore the impact of autogenic variations of the channel-system geometry (i.e. channel-bank heights, water depths, channel-system width, and channel slope) on channel-migration rates. In agreement with theoretical expectations, we find that, under such constant boundary conditions, the laterally reworked volume of sediment is constant and lateral channel-migration rates scale inversely with the channel-bank height. Furthermore, when channel-bank heights are accounted for, lateral migration rates are independent of the remaining channel geometry parameters. These constraints allow us, in a second step, to derive two alternative expressions for lateral channel-migration rates under different boundary conditions using dimensional analysis. Fits of a compilation of laboratory experiments to these expressions suggest that, for a given channel bank-height, migration rates are strongly sensitive to water discharges and more weakly sensitive to sediment discharges. In addition, external perturbations, such as changes in sediment and water discharges or base level fall, can indirectly affect lateral channel-migration rates by modulating channel-bank heights. © 2019 The Author. Earth Surface Processes and Landforms published by John Wiley & Sons, Ltd. © 2019 The Author. Earth Surface Processes and Landforms published by John Wiley & Sons, Ltd.     

Mechanical compaction and ultrasonic velocity of sands with different texture and mineralogical composition

This study presents the results of experimental compaction while measuring ultrasonic velocities of sands with different grain size, shape, sorting and mineralogy. Uniaxial mechanical compaction tests up to a maximum of 50 MPa effective stress were performed on 29 dry sand aggregates derived from eight different sands to measure the rock properties. A good agreement was found between the Gassmann saturated bulk moduli of dry and brine saturated tests of selected sands. Sand samples with poor sorting showed low initial porosity while sands with high grain angularity had high initial porosity. The sand compaction tests showed that at a given stress well‐sorted, coarse‐grained sands were more compressible and had higher velocities (Vp and Vs) than fine‐grained sands when the mineralogy was similar. This can be attributed to grain crushing, where coarser grains lead to high compressibility and large grain‐to‐grain contact areas result in high velocities. At medium to high stresses the angular coarse to medium grained sands (both sorted sands and un‐sorted whole sands) showed high compaction and velocities (Vp and Vs). The small grain‐to‐grain contact areas promote higher deformation at grain contacts, more crushing and increased porosity loss resulting in high velocities. Compaction and velocities (Vp and Vs) increased with decreasing sorting in sands. However, at the same porosity, the velocities in whole sands were slightly lower than in the well‐sorted sands indicating the presence of loose smaller grains in‐between the framework grains. Quartz‐poor sands (containing less than 55% quartz) showed higher velocities (Vp and Vs) compared to that of quartz‐rich sands. This could be the result of sintering and enlargement of grain contacts of ductile mineral grains in the quartz‐poor sands increasing the effective bulk and shear stiffness. Tests both from wet measurements and Gassmann brine substitution showed a decreasing Vp/Vs ratio with increasing effective stress. The quartz‐rich sands separated out towards the higher side of the Vp/Vs range. The Gassmann brine substituted Vp and Vs plotted against effective stress provide a measure of the expected velocity range to be found in these and similar sands during mechanical compaction. Deviations of actual well log data from experimental data may indicate uplift, the presence of hydrocarbon, overpressure and/or cementation. Data from this study may help to model velocity‐depth trends and to improve the characterization of reservoir sands from well log data in a low temperature (<80–100^o C) zone where compaction of sands is mostly mechanical.     

Flood frequencies reveal Holocene rapid climate changes (Lower Moulouya River,northeastern Morocco)

Current high‐resolution palaeoenvironmental records reveal short‐term Holocene coolings. One of these major Holocene rapid climate changes occurred between 3.2 and 2.7 cal. ka BP. The sensitivity of river systems vis‐à‐vis slight and short‐term Holocene climatic variations is a subject of controversy in the scientific community. In this paper, we present a 4.0 to 1.4 cal ka BP palaeoflood record from the Lower Moulouya River (northeastern Morocco) to demonstrate the high sensitivity of semiarid rivers in the southwestern Mediterranean towards Holocene environmental changes. The Lower Moulouya flood deposits are characterised by thick, well‐stratified, predominantly clayey to silty overbank fine sediments. These cohesive sediments show evidence of excellent preservation conditions against fluvial erosion and contain a continuous record of mid to late Holocene flood sequences. The Moulouya palaeoflood record can be interpreted in the context of regional and global high‐resolution proxy data, revealing a strong coupling with Holocene rapid climate changes. The centennial‐scale Moulouya palaeohydrological history will be discussed with palaeoenvironmental data from the same record (palaeomagnetics, sedimentary charcoal record, anthracological analyses, snail analyses) to generate new ideas about the mid to late Holocene hydrological cycle in the southwestern Mediterranean. The deduced features of pronounced Lower Moulouya flooding and the decreased fire recurrence during Holocene cooling remain somewhat inconsistent with the interpretation of other palaeohydrological and paleaoecological records from the southwestern Mediterranean. However, enhanced Lower Moulouya flood frequencies between 3.2 and 2.7 cal. ka BP agree with increased floodplain aggradation in other major river systems of Mediterranean North Africa. Copyright © 2009 John Wiley & Sons, Ltd.     

Influence of instruments on the H/V spectral ratios of ambient vibrations

For an optimal analysis of the H/V curve, it appears necessary to check the instrument signal to noise ratio in the studied frequency band, to ensure that the signal from the ground noise is well above the internal noise. We assess the reliability and accuracy of various digitizers, sensors and/or digitizer-sensor couples. Although this study is of general interest for any kind of seismological study, we emphasize the influence of equipment on H/V analysis results. To display the impact of the instrumental part on the H/V behavior, some series of tests have been carried out following a step-by-step procedure: first, the digitizers have been tested in the lab (sensitivity, internal noise...), then the three components sensors, still in the lab, and finally the usual user digitizers-sensors couple in lab and outdoors. In general, the digitizer characteristics, verified during this test, correspond well to the manufacturer specifications, however, depending on the digitizer, the quality of the digitized waveform can be very good to very poor, with variation from a channel to another channel (gain, time difference etc.). It appears very clearly that digitizers need a warming up time before the recording to avoid problems in the low-frequency range. Regarding the sensors, we recommend strongly to avoid the use of “classical” accelerometers (i.e., usual force balance technology). The majority of tested seismometers (broadband and short period, even 4.5 Hz) can be used without problems from 0.4 to 25 Hz. In all cases, the instrumentation should be checked first to verify that it works well for the defined study aim, but also to define its limit of use (frequency, sensitivity...).