Perfect partial reconstructions for multiple simultaneous sources

A major focus of research in the seismic industry of the past two decades has been the acquisition and subsequent separation of seismic data using multiple sources fired simultaneously. The recently introduced method of signal apparition provides a new take on the problem by replacing the random time-shifts usually employed to encode the different sources by fully deterministic periodic time-shifts. In this paper, we give a mathematical proof showing that the signal apparition method results in optimally large regions in the frequency–wavenumber space where exact separation of sources is achieved. These regions are diamond shaped and we prove that using any other method of source encoding results in strictly smaller regions of exact separation. The results are valid for arbitrary number of sources. Numerical examples for different number of sources (three, respectively, four sources) demonstrate the exact recovery of these diamond-shaped regions. The implementation of the theoretical proofs in the field is illustrated by the results of a conducted field test.     

Acoustic and petrophysical properties of mechanically compacted overconsolidated sands: part 1 – experimental results

This paper part one is set out to lay primary observations of experimental compaction measurements to form the basis for rock physics modelling in paper part two. P- and S-wave velocities and corresponding petrophysical (porosity and density) properties of seven unconsolidated natural sands with different mineralogical compositions and textures are reported. The samples were compacted in a uniaxial strain configuration from 0.5 up to 30 MPa effective stresses. Each sand sample was subjected to three loading cycles to study the influence of stress reduction on acoustic velocities and rock physical properties with the key focus on simulating a complex burial history with periods of uplift. Results show significant differences in rock physical properties between normal compaction and overconsolidation (unloaded and reloaded). The differences observed for total porosity, density, and P- and S-wave velocities are attributed to irrecoverable permanent deformation. Microtextural differences affect petrophysical, acoustic, elastic and mechanical properties, mostly during normal consolidation but are less significant during unloading and reloading. Different pre-consolidation stress magnitudes, stress conditions (isotropic or uniaxial) and mineral compositions do not significantly affect the change in porosity and velocities during unloading as a similar steep velocity–porosity gradient is observed. The magnitude of change in the total porosity is low compared to the associated change in P- and S-wave velocities during stress release. This can be explained by the different sensitivity of the porosity and acoustic properties (velocities) to the change in stress. Stress reduction during unloading yields maximum changes in the total porosity, P- and S-wave velocities of 5%, 25%, and 50%, respectively. These proportions constitute the basis for the following empirical (approximation) correlations: Δϕ ∼ ±5 ΔV_P and ΔV_P ∼ ±2ΔV_S. The patterns observed in the experiments are similar to well log data from the Barents Sea. Applications to rock physics modelling and reservoir monitoring are reported in a companion paper.     

An unusual compound object in Yamato 793408 (H3.2‐an): The missing link between compound chondrules and macrochondrules?

We found a large (~2 mm) compound object in the primitive Yamato 793408 (H3.2‐an) chondrite. It consists mostly of microcrystalline material, similar to chondrule mesostasis, that hosts an intact barred olivine (BO) chondrule. The object contains euhedral pyroxene and large individual olivine grains. Some olivine cores are indicative of refractory forsterites with very low Fe‐ and high Ca, Al‐concentrations, although no ¹⁶O enrichment. The entire object is most likely a new and unique type, as no similar compound object has been described so far. We propose that it represents an intermediate stage between compound chondrules and macrochondrules, and formed from the collision between chondrules at low velocities (below 1 m s^?1) at high temperatures (around 1550 °C). The macrochondrule also trapped and preserved a smaller BO chondrule. This object appears to be the first direct evidence for a genetic link between compound chondrules and macrochondrules. In accordance with previous suggestions and studies, compound chondrules and macrochondrules likely formed by the same mechanism of chondrule collisions, and each represents different formation conditions, such as ambient temperature and collision speed.     

Shocked quartz grains in the early Cambrian Vakkejokk Breccia,Sweden—Evidence of a marine impact

Here we present a study of the abundance and orientation of planar deformation features (PDFs) in the Vakkejokk Breccia, a proposed lower Cambrian impact ejecta layer in the North‐Swedish Caledonides. The presence of PDFs is widely accepted as evidence for shock metamorphism associated with cosmic impact events and their presence confirms that the Vakkejokk Breccia is indeed the result of an impact. The breccia has previously been divided into four lithological subunits (from bottom to top), viz. lower polymict breccia (LPB), graded polymict breccia (GPB), top sandstone (TS), and top conglomerate (TC). Here we show that the LPB contains no shock metamorphic features, indicating that the material derives from just outside of the crater and represents low‐shock semi‐autochthonous bombarded strata. In the overlying, more fine‐grained GPB and TS, quartz grains with PDFs are relatively abundant (2–5% of the grain population), and with higher shock levels in the upper parts, suggesting that they have formed by reworking of more distal ejecta by resurge of water toward the crater in a marine setting. The absence of shocked quartz grains in the TC indicates that this unit represents later slumps associated with weathering and erosion of the protruding crater rim. Sparse shocked quartz grains (<0.2%) were also found in sandstone beds occurring at the same stratigraphic level as the Vakkejokk Breccia 15–20 km from the inferred crater site. It is currently unresolved whether the sandstone at these distal sites is related to the impact or just contains rare reworked quartz grains with PDFs.     

Resurge gullies and “inverted sombrero” morphology,Flynn Creek impact structure,Tennessee

The Flynn Creek impact structure is an approximately 3.8 km diameter, marine‐target impact structure, which is located in north central Tennessee, USA. The target stratigraphy consists of several hundreds of meters of Ordovician carbonate strata, specifically Knox Group through Catheys‐Leipers Formation. Like other, similarly sized marine‐target impact craters, Flynn Creek's crater moat‐filling deposits include, in stratigraphic order, gravity‐driven slump material, aqueous resurge deposits, and secular (postimpact) aqueous settling deposits. In the present study, we show that Flynn Creek also possesses previously undescribed erosional resurge gullies and an annular, sloping surface that comprises an outer crater rim surrounding an inner, nested bowl‐shaped crater, thus forming a concentric crater structure. Considering this morphology, the Flynn Creek impact structure has a crater shape that has been referred to at other craters as an “inverted sombrero.” In this paper, we describe the annular rim and the inner crater at Flynn Creek using geographic information system technology. We relate these geomorphic features to the marine environment of crater formation, and compare the Flynn Creek impact structure with other marine‐target impact structures having similar features.     

Clay mineral diagenesis and quartz cementation in mudstones: The effects of smectite to illite reaction on rock properties

The Late Cretaceous to Early Tertiary sequence of the Vøring and Møre Basins from the Norwegian Sea has been examined with respect to mineralogy based on 319 cutting samples from five wells. A clear relationship between mineralogy and well log data is demonstrated. A significant change with respect to velocity, porosity and density occurs within the depth interval corresponding to 80–90 °C. At shallow depths/temperatures (<2.0 km/70 °C), compaction is mainly mechanical and the physical properties are similar to what has been measured by experimental compaction of mudstones. At greater depths, however, the log derived velocities and densities are higher than those produced by experimental compaction indicating significant chemical compaction. XRD analyses show a progressive alteration of smectite to illite (S–I) within this depth/temperature interval which results in the release of significant amounts of silica into solution. Detrital silt and fine-grained quartz showed no secondary quartz overgrowths. These grains are isolated within a clay matrix and surrounded by clay minerals, thus limiting the available surface area and pore space for quartz overgrowths. Chemical analyses (XRF) indicate that silica is conserved within this depth interval, and the amount released from S–I alteration was locally precipitated. Field emission gun-scanning electron microscopy (FEG-SEM) and cathode luminescence (CL) identified authigenic micro-crystalline quartz cement within the clay matrix at temperatures above ∼85 °C. This is accompanied by an increase in velocity and density indicating that the S–I reaction and the precipitation of authigenic quartz caused a significant change in the rock stiffness.     

The deglaciation of Upernavik trough,West Greenland,and its Holocene sediment infill: processes and provenance

Under glacial climates, continental ice sheets such as, e.g., the Greenland Ice Sheet, extended onto the continental shelves and often carved out deep cross-shelf troughs. The sedimentary infill of such troughs commonly is a product of the complex interactions between the ice sheets, largely driving sediment input into the ocean, and the surrounding water masses. Off West Greenland, research has focused on the Disko and Uummannaq troughs, leaving the northerly adjacent Upernavik trough relatively understudied. Hence, neither the chronology of deglaciation nor the details of its postglacial infill are sufficiently well understood. Here, we combine computed tomography image-derived information with geochemical and granulometric data from four sediment cores recovered from the Upernavik trough that point to (i) deglaciation of the mid-shelf probably around 13.4 cal. ka BP that was most likely driven by a northward advection of warmer Atlantic waters during the Bølling–Allerød, (ii) the presence of widespread mass wasting around 8 cal. ka BP on the inner shelf and (iii) the complex interplay between various modes of sediment input, transport and deposition under hemipelagic sedimentation afterwards. While this interplay complicates provenance studies, we identify two major sediment delivery mechanisms that control transport and deposition from four sediment source areas. Through the Early Holocene the relative contributions of sediments from the various sources changed from a predominantly local origin to more southerly sources, mainly driven by decreasing input from the local sources. The integration of relative sediment source contributions with varying sedimentation rates challenges previous studies postulating intensified sediment delivery from the south through a greater influence of the West Greenland Current and highlights the need for the integration of sediment input and transport mechanisms into provenance studies in the area.