Strontium isotopes as tracers of airborne fly ash from coal-fired power plants

Fly ash generated by coal-fired power plants is in part collected by filters in the emission stacks while a small portion is vented into the atmosphere. Since many of the coalfired power plants in the western United States are located in the desnrt, the ability to monitor fly ash emissions requires a chemical tracer that utilizes desert soil and plant interactions with the fly ash deposited in the desert environment. This investigation presents the results of a controlled greenhouse experiment in which a native desert plant, the brittlebush (Encelia farinosa), was grown on admixtures of desert soils and fly ash. The fly ash is strongly enriched in Sr and the brittlebush is a Sr accumulator. The data demonstrate that (1) the brittlebush isotopically equilibrates with desert soils whose fly ash components are as low as 0.25% by weight, (2) the fly ash Sr is apparently more available to the plant, than Sr derived from the soils, and (3) the difference between the⁸⁷Sr/⁸⁶Sr ratio of the fly ash (0.70807) and soils (0.71097 to 0.71117) warrants further investigations in the natural environment to determine the practicality of this method as a natural tracer of fly ash in the environment.     

An extended finite volume method and fixed-stress approach for modeling fluid injection–induced tensile opening in fractured reservoirs

Fluid injection–induced tensile opening is modeled using an extended finite volume method (XFVM). An embedded fracture strategy is used for the flow problem, that is, the fractures are discretized using finite volume segments without resolving the grid around them. Further, the discontinuities across fractures are modeled using special basis functions. The fracture openings due to enhanced fluid pressure and the associated shear slip due to traction free boundary condition on the fracture segments are both modeled using these special discontinuity basis functions. Mass transfer between fractures and matrix is modeled using the pressure difference. The enhancement of fracture storativity due to tensile opening leads to stronger coupling between flow and mechanics. An iterative scheme relying on the fixed-stress approach for fractures, which conserves the stress dependent terms over each iteration of the flow problem, has been introduced. Tensile opening has been simulated for single fractures embedded in two- and three-dimensional matrices. The convergence criterion for sequentially implicit fixed-stress scheme for fractures embedded in elastic media is established and has been validated numerically. Further, for 2D simulations, the effect of the matrix permeability for fracture propagation due to tensile opening has been studied.     

A fast method for the solution of a system of simultaneous linear equations—A method adapted to a particular problem

Mathematical Geosciences - In mineral deposit evaluation, the estimation of block values can involve the solution of as many as 100,000 systems of linear equations. To minimize computing costs it...     

Long base line tilt and strain measurement

Two types of noise afflict strain and tilt measurement. They may be categorized as “active” noise, which is due to atmospheric pressure variations, temperature variations, water-table variations and so forth; and “passive” or signal-generated noise which is a consequence of the interaction of the strain field of interest with inhomogeneities of material properties local to the measurement site.The reason why both types of noise are normally reduced by the use of long base line instruments is explained and a simple, practical long base line tiltmeter is described.     

Relationships between gold concentration and structure in quartz veins from the Hodgkinson Province, northeastern Australia

The Hodgkinson Province is a tract of␣multiply deformed Silurian-Devonian rocks in north␣Queensland, Australia. Gold-bearing quartz veins from the West Normanby Goldfield in the northern Hodgkinson Province were emplaced during the Permian D₄ event, broadly coeval with regional granite emplacement. Taylors Fault, a major structure that formed during D₂, hosts the veins which infill dilatational jogs opened during sinistral-normal reactivation of the fault in D₄. Veins contain graphitic laminations that formed when fault planes segmented wallrocks adjacent to the veins, producing tabular clasts that were tectonically sliced into the reefs. Laminations are the result of progressive shear strain, associated with continued movement on the faults, which caused strain-enhanced dissolution of silicate minerals and residual graphite enrichment in the clasts. This process produced graphite-coated shear planes that delimit zones of grain size reduction in the veins. Laminations commonly contain stylolites, which nucleated on pronounced sinuosities of the shear planes due to progressive shortening during D₄. Gold particles have preferentially nucleated in zones of relatively coarser-grained quartz adjacent to the shear planes, where shortening strain caused microfracturing and allowed fluid access. Gold may have been introduced with the quartz, but was redistributed within the reefs and localized along the laminations by the effects of synchronous, progressive deformation. Regionally, gold deposits show close spatial relationships with granite plutons of the Permian Whypalla Supersuite. Relationships in the West Normanby Gold Field support a regional model of reef emplacement and gold mineralization during the Permian D₄ event. Received: 24 August 1997 / Accepted: 14 October 1997     

KARSTIC: a sensitivity method for carbonate aquifers in karst terrain

. Groundwater in karstic aquifers can be dangerously sensitive to contamination. Many cities in the western USA rely on karstic carbonate aquifers for municipal water supplies. For example, Rapid City, South Dakota, pumps more than half of its drinking water from wells in the Madison Limestone. This work examined the sensitivity of karstic aquifers to surface contamination in mountainous terrain. Where karstic carbonate aquifers are exposed at their outcrop areas, they are particularly susceptible to the introduction of contamination through diffuse recharge or through point recharge at swallow holes along streams. Residential developments in mountainous regions of the western USA are encroaching on the recharge areas of karstic aquifers. Many of these residential developments are served by onsite wastewater disposal systems such as septic tanks and drain fields, with the attendant danger of introduction of pathogens from malfunctioning treatment systems above fractured limestone which offers little filtering. Where streams disappear into karstic aquifers at swallow holes, microbial contaminants such as Giardia or Cryptosporidium are a concern, as well as potential spills, leaks, or accidents along roads near these streams. The KARSTIC method developed and modified in this work puts greater emphasis on karst features than previous sensitivity procedures such as the US Environmental Protection Agency's DRASTIC method. The modified method gives increased attention to highly sensitive areas of karstic carbonate aquifers by weighting the synergistic effects of fracturing, karst development, and swallow holes of recharging streams. In a field application, hydrogeologic maps of a watershed in the Black Hills, USA, were digitized into a geographic information system. The resulting sensitivity map and report can be used by planners, managers, and the public as a screening tool for assessing groundwater sensitivity in regions which include karstic aquifers.     

Effects of weathering on site response

Nearly all studies of site response under seismic excitation employ idealized site models in which uniform layers of homogeneous soils are separated by perfect interfaces. The impedance mismatch at each interface gives rise to wave reflections which strongly affect the calculated free surface response. In reality, these perfect interfaces may often not exist. Instead, a zone in which materials from both above and below are mingled may form a blurred interface between layers. This article examines the effects of such weathered zones. The zone is modelled by a linearly varying shear modulus so that no abrupt impedance change occurs. Significant differences in response of weathered and unweathered profiles are found.     

Late Quaternary Vegetation and Climate of the Wind River Range, Wyoming

Sediments from Rapid Lake document glacial and vegetation history in the Temple Lake valley of the Wind River Range, Wyoming over the past 11,000 to 12,000 yr. Radiocarbon age determinations on basal detrital organic matter from Rapid Lake (11,770 ± 710 yr B.P.) and Temple Lake (11,400 ± 630 yr B.P.) bracket the age of the Temple Lake moraine, suggesting that the moraine formed in the late Pleistocene. This terminal Pleistocene readvance may be represented at lower elevations by the expansion of forest into intermontane basins 12,000 to 10,000 yr B.P. Vegetation in the Wind River Range responded to changing environmental conditions at the end of the Pleistocene. Following deglaciation, alpine tundra in the Temple Lake valley was replaced by a Pinus albicaulis parkland by about 11,300 ¹⁴C yr B.P. Picea and Abies, established by 10,600 14C yr B.P., grew with Pinus albicaulis in a mixed conifer forest at and up to 100 m above Rapid Lake for most of the Holocene. Middle Holocene summer temperatures were about 1.5°C warmer than today. By about 5400 ¹⁴C yr B.P. Pinus albicaulis and Abies became less prominent at upper treeline because of decreased winter snowpack and higher maximum summer temperatures. The position of the modern treeline was established by 3000 ¹⁴ C yr B.P. when Picea retreated downslope in response to Neoglacial cooling.