Influence of non-feedback variations of radiation on the determination of climate feedback

Recent studies have estimated the magnitude of climate feedback based on the correlation between time variations in outgoing radiation flux and sea surface temperature (SST). This study investigates the influence of the natural non-feedback variation (noise) of the flux occurring independently of SST on the determination of climate feedback. The observed global monthly radiation flux is used from the Clouds and the Earth's Radiant Energy System (CERES) for the period 2000–2008. In the observations, the time lag correlation of radiation and SST shows a distorted curve with low statistical significance for shortwave radiation while a significant maximum at zero lag for longwave radiation over the tropics. This observational feature is explained by simulations with an idealized energy balance model where we see that the non-feedback variation plays the most significant role in distorting the curve in the lagged correlation graph, thus obscuring the exact value of climate feedback. We also demonstrate that the climate feedback from the tropical longwave radiation in the CERES data is not significantly affected by the noise. We further estimate the standard deviation of radiative forcings (mainly from the noise) relative to that of the non-radiative forcings, i.e., the noise level from the observations and atmosphere–ocean coupled climate model simulations in the framework of the simple model. The estimated noise levels in both CERES (>13 %) and climate models (11–28 %) are found to be far above the critical level (~5 %) that begins to misrepresent climate feedback.     

Rock preference of planulae of jellyfish Aurelia aurita (Linnaeus 1758) for settlement in the laboratory

Planulae of Aurelia aurita were exposed to 11 types of rocks (basalt, gabbro, granite, rhyolite, sandstone, limestone, conglomerate, gneiss, quartzite, marble and schist) to examine their attachment preference among rock material and position. Numbers of attached polyps was the highest on marble and the least on limestone. Their preference with regard to settling position was the same among the rocks, showing the highest density of polyps on the underside (88.5%) compared to upper (23.6%) and perpendicular sides (10.3%) of rock. The results showed that while position preference is more important than rock property, higher numbers of polyps were observed in rocks with a medium surface hardness.     

Trace metals (Co,Ni, Cu,Cd, and Pb) in the southern East/Japan Sea

Total dissolvable metals (Co, Ni, Cu, Cd, and Pb) in both surface waters and the water columns were acquired in the southern East/Japan Sea during a cruise around the Ulleung Basin in June 2001 to understand the spatial distributions of the metals. Concentrations in offshore surface waters were found to be Co 60 ± 12 pM, Ni 2.16 ± 0.25 nM, Cu 1.85 ± 0.55 nM, Cd 0.134 ± 0.018 nM, and Pb 155 ± 40 pM. Spatial distributions in surface waters showed that metal levels were generally enhanced at coastal sites in both Korea and Japan, where the metal distributions indicated complex patterns due to inputs, biogeochemical processes, and physical factors including upwelling. The Co distributions in the water columns seemed to be influenced predominantly by surface and bottom inputs, scavenged rather than regenerated at depth. For Cd, there was generally good agreement between the Cd and PO₄ depth distributions, in agreement with the literature. The Cd/PO₄ ratio from the water columns was found to be 0.133–0.203, lower than that in other marginal seas (e.g. the East/South China Seas and the Philippine Sea) of the western Pacific Ocean; this might be a result of the fast ventilation rate in this sea. The vertical Pb profile showed typical scavenged-type behavior with a surface maximum and deep minimum. From a comparison of inputs from the atmosphere and the Tsushima Warm Current, atmospheric deposition is substantial enough that it cannot be ignored, and its role in metal cycling is more significant in the offshore zone.     

Autopilot control synthesis for path tracking maneuvers of underwater vehicles

This paper is concerned with the robust control synthesis of autonomous underwater vehicle(AUV) for general path following maneuvers.First,we present maneuvering kinematics and vehicle dynamics in a unified framework.Based on H∞ loop-shaping procedure,the 2-DOF autopilot controller has been presented to enhance stability and path tracking.By use of model reduction,the high-order control system is reduced to one with reasonable order,and further the scaled low-order controller has been analyzed in both the frequency and the time domains.Finally,it is shown that the autopilot control system provides robust performance and stability against prescribed levels of uncertainty.     

Development of a reconstituted brown coal material using cement as a binder

Like any other coal, the highly heterogeneous nature of brown coal can sometimes make it difficult to interpret the results of laboratory experiments. More homogeneous samples with properties reproducible in the laboratory would provide significant advantage, especially in understanding the effects of various factors in the properties of coal. An attempt was made to develop reconstituted coal (RC) samples in the laboratory through an extensive material development and laboratory testing programme. The latter consisted of mainly uniaxial compression tests. The main objective in developing the RC material is to use it in future research on CO₂ sequestration in unmineable coal seams. A highly homogeneous coal sample would make it much easier to identify, for example, the effect of CO₂ sorption on the mechanical, flow and transport properties of coal. Uniaxial compression tests were conducted on some brown coal samples to determine the approximate mechanical properties. The results revealed an average uniaxial compressive strength of 1.46 MPa, an average elastic modulus of 77.43 MPa and a Poisson’s ratio of 0.16. The measured properties were used as a reference for the development of RC samples. An extensive laboratory experimental programme was conducted to develop RC samples with the desirable mechanical properties. Portland cement was used as the cementing agent for the RC. Different variables such as percentage of cement, water content, compaction load and curing time were taken into account when developing RC samples. Uniaxial compression tests were carried out to ensure that the RC samples were reasonably homogeneous and the properties were similar to those of natural coal. Percentages of cement by weight of coal such as 4, 6 and 8% were attempted and a 4% cement mix with 50% water was considered most suitable for the RC samples. Average compressive strength of 0.8 MPa (28-day strength) and an average elastic modulus of 34 MPa were achieved for the RC samples. Further efforts at improvement would involve better matching of the uniaxial compressive strength and elastic modulus of RC samples with the natural coal samples.     

The spatial distribution of surface <Emphasis Type="Italic">f</Emphasis>CO<Subscript>2</Subscript> in the Southwestern East Sea/Japan sea during summer 2005

Fugacity of CO₂ (fCO₂), temperature, salinity, nutrients, and chlorophyll-a were measured in the surface waters of southwestern East Sea/Japan Sea in July 2005. Surface waters were divided into three waters based on hydrographic characteristics: the water with moderate sea surface temperature (SST) and high sea surface salinity (SSS) located east of the front (East water); the water with high SST and moderate SSS located west of the front (West water); and the water with low SST and SSS located in the middle part of the study area (Middle water). High fCO₂ larger than 420 μatm were found in the West water. In the Middle water, CO₂ was undersaturated with respect to the atmosphere, with values between 246 and 380 μatm. Moderate fCO₂ values ranging from 370 to 420 μatm were observed in the East water. For the East and West waters, estimates of temperature dependency of fCO₂ (12.6 and 15.1 μatm °C⁻¹, respectively) were rather similar to a theoretical value, indicating that SST is likely to be a major factor controlling the surface fCO₂ distribution in these two regions. In the Middle water, however, the estimated temperature dependence was somewhat lower than the theoretical value, and relatively high concentrations of surface chlorophyll-a coincided with the low surface fCO₂, implying that biological uptake may considerably affect the fCO₂ distribution. The net sea-to-air CO₂ flux of the study area was estimated to be 0.30±4.81 mmol m⁻² day⁻¹ in summer, 2005.     

Characteristics of the changes in tropical cyclones influencing the South Korean region over the recent 10 years (2001–2010)

Through the investigation of tropical cyclone (TC) characteristics related to climate change, this study found that the frequency of TCs occurring over the Western North Pacific has recently decreased slightly, while their average intensity has increased. The number of overall TCs that passed within the vicinity of South Korea has also been reduced, but the number of strong typhoons in the area, those with maximum wind speeds of more than 44 m/s, has significantly increased. These changes are closely related to the following phenomena. (1) The average genesis region of TCs that influence South Korea has moved eastward. Accordingly, the TCs tend to strengthen as they move westward for long distances along the Intertropical Convergence Zone (ITCZ) trade easterlies and the southern boundary of the North Pacific Subtropical High (NPSH). (2) The NPSH and Asia Monsoon trough, which are known to affect TC tracks, have extended to the northwest and southeast. This has caused TCs that travel to higher latitudes and curve back toward the Korean Peninsula to become more frequent. (3) TCs have approached the Korean Peninsula without hitting land. In addition, the sea surface temperature became higher than it was before. These factors have caused TCs to maintain their strength or become stronger than before.     

Sequestration of arsenate from aqueous solution using 2-line ferrihydrite: equilibria,kinetics, and X-ray absorption spectroscopic analysis

Arsenic(V), as the arsenate (AsO₄ ^3?) ion and its conjugate acids, has a strong affinity on Fe, Mn, and Al (oxyhydr)oxides and clay minerals. Removal of arsenate from aqueous solution by poorly crystalline ferrihydrite (hydrous ferric oxide) via a combination of macroscopic (equilibria and kinetics of sorption) and X-ray absorption spectroscopic studies was investigated. The removal of arsenate significantly decreased with increasing pH and sorption maxima of approximately 1.994 mmol/g (0.192 mol_As/mol_Fe) were achieved at pH 2.0. The Langmuir isotherm is most appropriate for arsenate sorption over the wide range of pH, indicating that arsenate sorption preferentially takes place at relatively homogenous and monolayer sites rather than heterogeneous and multilayer surfaces. The kinetic study demonstrated that arsenate sorption onto 2-line ferrihydrite is considerably fast, and sorption equilibrium was achieved within the reaction time of 2 h. X-ray absorption near-edge structure spectroscopy indicates no change in oxidation state of arsenate following interaction with the ferrihydrite surfaces. Extended X-ray absorption fine structure spectroscopy supports the efficient removal of arsenate by the 2-line ferrihydrite through the formation of highly stable inner-sphere surface complexes, such as bidentate binuclear corner-sharing (²C) and bidentate mononuclear edge-sharing (²E) complexes.     

Geologically controlled agricultural contamination and water–rock interaction in an alluvial aquifer: results from a hydrochemical study

Environmental Earth Sciences - Hydrogeochemistry data collected from three multi-level monitoring wells in a sandy alluvial aquifer located in the Keum River watershed, South Korea, are used in...     

Time stability and variability of Electronically Scanned Thinned Array Radiometer soil moisture during Southern Great Plains hydrology experiments

Variability and time‐stability analysis for field‐scale (800 m) Electronically Scanned Thinned Array Radiometer soil moisture within a satellite scale footprint (∼ 50 km) were quantified using observations from the Southern Great Plains Hydrology Experiment 1997 and 1999 (SGP97 and SGP99). The pixels' time‐stability properties were examined with respect to soil, vegetation and topographic parameters in order to determine which physical parameters can be used to identify good candidate observation locations for validating soil moisture from satellite observations and global‐scale model output. The results show that the time‐stability concept remains valid at the satellite scale. The root mean square error values were 1·47, 1·51, 1·93 and 2·32% for the 1st, 2nd, 50th and 100th most stable fields, respectively. The most stable locations had sand and clay percentages consistent with sandy loam soils and moderate to high normalized difference vegetation index values. Neither land cover nor topography properties could be used to identify potentially stable fields in the study region. Copyright © 2010 John Wiley & Sons, Ltd.