Characterization of Compass M-1 signals

An analysis of observations from China’s first medium earth orbit satellite Compass M-1 is presented, with main focus on the first orbit and clock solution for this satellite. The orbit is computed from laser ranging measurements. Based on this orbit solution, the apparent clock offset is estimated using measurements from two GNSS receivers, which allow Compass tracking. The analysis of the clock solutions reveals unexpectedly high dynamics in the pseudorange and carrier-phase observations. Furthermore, carrier-to-noise density ratio, pseudorange noise, and multipath are analyzed and compared to GPS and GIOVE. The results of the clock analysis motivate further research on the signals of the geostationary satellites of the Compass constellation.     

Time and Frequency Transfer Using GPS Codes and Carrier Phases: Onsite Experiments

Recent studies have shown the capabilities of Global Positioning System (GPS) carrier phases for frequency transfer based on the observations from geodetic GPS receivers driven by stable atomic clocks. This kind of receiver configuration is the kind primarily used within the framework of the International GPS Service (IGS). The International GPS Service/Bureau International des Poids et Mesures (IGS/BIPM) pilot project aims at taking advantage of these GPS receivers to enlarge the network of Time Laboratories contributing to the realization of the International Atomic Time (TAI). In this article, we outline the theory necessary to describe the abilities and limitations of time and frequency transfer using the GPS code and carrier phase observations. We report on several onsite tests and evaluate the present setup of our 12-channel IGS receiver (BRUS), which uses a hydrogen maser as an external frequency reference, to contribute to the IGS/BIPM pilot project. In the initial experimental setup, the receivers had a common external frequency reference; in the second setup, separate external frequency references were used. Independent external clock monitoring provided the necessary information to validate the results. Using two receivers with a common frequency reference and connected to the same antenna, a zero baseline, we were able to use the carrier phase data to derive a frequency stability of 6 × 10⁻¹⁶ for averaging times of one day. The main limitation in the technique originates from small ambient temperature variations of a few degrees Celsius. While these temperature variations have no effect on the functioning of the GPS receiver within the IGS network, they reduce the capacities of the frequency transfer results based on the carrier phase data. We demonstrate that the synchronization offset at the initial measurement epoch can be estimated from a combined use of the code and carrier phase observations. In our test, the discontinuity between two consecutive days was about 140 ps. ? 1999 John Wiley & Sons, Inc.     

Correction of inertial oscillations by assimilation of HF radar data in a model of the Ligurian Sea

This article aims at analyzing if high-frequency radar observations of surface currents allow to improve model forecasts in the Ligurian Sea, where inertial oscillations are a dominant feature. An ensemble of ROMS models covering the Ligurian Sea, and nested in the Mediterranean Forecasting System, is coupled with two WERA high-frequency radars. A sensitivity study allows to determine optimal parameters for the ensemble filter. By assimilating observations in a single point, the obtained correction shows that the forecast error covariance matrix represents the inertial oscillations, as well as large- and meso-scale processes. Furthermore, it is shown that the velocity observations can correct the phase and amplitude of the inertial oscillations. Observations are shown to have a strong effect during approximately half a day, which confirms the importance of using a high temporal observation frequency. In general, data assimilation of HF radar observations leads to a skill score of about 30% for the forecasts of surface velocity.     

Controls on knickpoint migration in a drainage network of the moderately uplifted Ardennes Plateau,Western Europe

Much research has been devoted to the development of numerical models of river incision. In settings where bedrock channel erosion prevails, numerous studies have used field data to calibrate the widely acknowledged stream power model of incision and to discuss the impact of variables that do not appear explicitly in the model's simplest form. However, most studies have been conducted in areas of active tectonics, displaying a clear geomorphic response to the tectonic signal. Here, we analyze the traces left in the drainage network 0.7 My after the Ardennes region (western Europe) underwent a moderate 100–150 m uplift. We identify a set of knickpoints that have traveled far upstream in the Ourthe catchment, following this tectonic perturbation. Using a misfit function based on time residuals, our best fit of the stream power model parameters yields m = 0.75 and K = 4.63 × 10^‐8 m^‐0.5y^‐1. Linear regression of the model time residuals against quantitative expressions of bedrock resistance to erosion shows that this variable does not correlate significantly with the residuals. By contrast, proxies for position in the drainage system prove to be able to explain 76% of the residual variance. High time residuals correlate with knickpoint position in small tributaries located in the downstream part of the Ourthe catchment, where some threshold was reached very early in the catchment's incision history. Removing the knickpoints stopped at such thresholds from the data set, we calculate an improved m = 0.68 and derive a scaling exponent of channel width against drainage area of 0.32, consistent with the average value compiled by Lague for steady state incising bedrock rivers. Copyright © 2014 John Wiley & Sons, Ltd.     

Importance sampling for efficient modelling of hydraulic loads in the Rhine–Meuse delta

During flood events, breaching of flood defences along a river system can have a significant reducing effect on downstream water levels and flood risks. This paper presents a Monte Carlo based flood risk framework for policy decision making, which takes this retention effect into account. The framework is developed to estimate societal flood risk in terms of potential numbers of fatalities and associated probabilities. It is tested on the Rhine–Meuse delta system in the Netherlands, where floods can be caused by high flows in the Rhine and Meuse rivers and/or high sea water levels in the North Sea. Importance sampling is applied in the Monte Carlo procedure to increase computational efficiency of the flood risk computations. This paper focuses on the development and testing of efficient importance sampling strategies for the framework. The development of an efficient importance sampling strategy for river deltas is more challenging than for non-tidal rivers where only discharges are relevant, because the relative influence of river discharge and sea water level on flood levels differs from location to location. As a consequence, sampling methods that are efficient and accurate for one location may be inefficient for other locations or, worse, may introduce errors in computed design water levels. Nevertheless, in the case study described in this paper the required simulation time was reduced by a factor 100 after the introduction of an efficient importance sampling method in the Monte Carlo framework, while at the same time the accuracy of the Monte Carlo estimates were improved.     

Modelling the Gibraltar Strait/Western Alboran Sea ecohydrodynamics

The ecohydrodynamics of the Gibraltar Strait and the Western Alboran Sea is investigated using a 3-D, two-way nested, coupled hydrodynamic/plankton ecosystem model, exploiting the MEDATLAS climatological database. A high-resolution model (~1 km) of the Gibraltar/Western Alboran region embedded within a coarse-resolution model of the West Mediterranean (~5 km) is implemented. The model seasonal climatology of the 3-D circulation and the flow characteristics at the Gibraltar Strait and the Alboran Sea are discussed, and their impact on the plankton ecosystem evolution is explored. An important ecohydrodynamic feature produced by the model is a permanent upwelling zone in the northwestern part of the Alboran Sea in agreement with observations. Model results show that both horizontal and vertical current intensity of the Atlantic Jet increases progressively at the strait to obtain maximum values in the northeastern Mediterranean entrance, inducing an upward displacement of the nitracline. The nutrient-rich water transport through the strait along with the generation of cyclonic vorticity in the northwestern Alboran Sea result in the accumulation of nutrients there and thus induce a permanent fertilisation of this area.     

The MAR-Vema Fracture Zone intersection surveyed by deep submersible Nautile

One of the two objectives of the Vemanaute cruise of the French deep submersible Nautile, was the geological study of the eastern intersection area between the Mid-Atlantic Ridge (MAR) and the Vema Fracture Zone in the equatorial Atlantic. Fourteen dives were conducted that allowed detailed geological survey and sampling of the main morphostructural units of this area: the northern and southern walls of the fracture zone, the median ridge, the northern and southern troughs and the nodal basin. In situ observations of recent tectonic features such as furrows, ridges and circular depressions, concentrated within the southern trough, allowed us to establish the location and the size of the present-day displacement zone. Geological investigations have shown that the nodal basin is entirely floored by basalts thus contrasting with other equivalent areas such as the Kane and Oceanographer fracture zone-MAR eastern intersections. Finally, this study stresses the great opposition between the relatively old and tectonically inactive northern part of the fracture, and the southern part which shows active tectonics and recent volcanic activity.     

Al-O--Al paramagnetic defects in kaolinite

Trapped holes located on Al-O-Al bonds in kaolinite were studied by electron paramagnetic resonance spectroscopy (EPR) at 9.3 and 35 GHz applied to well-crystallized, X-ray irradiated and oriented samples. The Q-band EPR spectrum is characterized by three clearly separated groups of 11 quasi-equidistant superhyperfine lines centered at g_xx=2.040±0.0005, g_yy=2.020±0.0005 and g_zz=2.002±0.001. In each of these groups, the 11 superhyperfine lines exhibit intensities according to the ratios 12345654321. An angular dependence of the Q-band EPR spectrum with respect to the magnetic field is demonstrated by measurements on oriented films of kaolinite. An appropriate numerical treatment of the EPR spectra is described, which allowed extraction of the SuperHyperfine Structures (SHFS). X-and Q-band spectra have also been simulated. It is concluded from these experiments that only one type of center is present. This center, labelled the B-center in the literature, is very probably a hole trapped on oxygen (O^- center) atoms coupled to two octahedral aluminium.     

Reconstruction of incomplete oceanographic data sets using empirical orthogonal functions: application to the Adriatic Sea surface temperature

A method for the reconstruction of missing data based on an EOF decomposition has been applied to a large data set, a test case of Sea Surface Temperature satellite images of the Adriatic Sea. The EOF decomposition is realised with a Lanczos method, which allows optimising computational time for large matrices. The results show that the reconstruction method leads to accurate reconstructions as well as a low cpu time when dealing with realistic cases. The method has been tested with different amounts of missing data, artificially adding clouds ranging from 40% to 80% of data loss, and then compared to the same data set with no missing data. A comparison with in situ data has also been made. These validation studies show that results are robust, even when the amount of missing data is very high. The reconstruction of the data from the Adriatic Sea shows realistic features and a reliable temperature distribution. In addition, the method is compared to an Optimal Interpolation reconstruction. The results obtained with both methods are very similar. The main difference is the computational time, which is reduced nearly 30 times with the method presented here. Once the reconstruction has been performed, the EOF decomposition is analysed to show the method’s reliability, and a cold event on the Albanian coast is studied. The reconstructed data reflect the effect of wind on the Albanian coast, that led to a cold-water episode in this zone for a 6-day period.     

Sedimentary record of redox-sensitive elements (U, Mn, Mo) in a transitory anoxic basin (the Thau lagoon, France)

In order to further document the relation between redox conditions and the sedimentary record of Mn, U and Mo in a transitory anoxic water basin, their distribution has been studied along two profiles in the Thau lagoon (France). Sediments and pore-water have been sampled at two contrasting sites located, respectively, in the shellfish-farming area and in the centre of the lagoon. In the shellfish-farming area, the particulate organic carbon (POC) data indicate a more rapid organic matter mineralisation compared to the centre of the lagoon. This results in a sharper redox gradient characterized by the appearance of H₂S in pore-water a few millimetres below the sediment–water interface. In the centre of the lagoon, H₂S appears at a depth of 35 cm.In both cores, sedimentary Mn is relatively depleted through out the whole sedimentary column and varies with the proportion of clay minerals. After an initial release into solution at the sediment–water interface in relation to Mn-oxide reductive dissolution, authigenic U is immobilized when sulphides appear. Despite the occurrence of anoxic conditions at the sediment–water interface at the site influenced by shellfish farming, the burial of U is reduced by bioturbation, which raises reducing sediments to the surface. In the centre of the lagoon, Mo profiles reflect continuous diffusion into pore water and immobilization at 15 cm probably in anoxic microenvironments. At shellfish farms, dissolved Mo undergoes removal with sulphides but contrary to U, sedimentary Mo does not appear to be strongly affected by bioturbation. The profile indicates an increase in the frequency of anoxia crises during the second half of the 20th century.