Evaluation of methods of spatial interpolation for monthly rainfall data over the state of Rio de Janeiro,Brazil

Five deterministic methods of spatial interpolation of monthly rainfall were compared over the state of Rio de Janeiro, southeast Brazil. The methods were the inverse distance weight (IDW), nearest neighbor (NRN), triangulation with linear interpolation (TLI), natural neighbor (NN), and spline tension (SPT). A set of 110 weather stations was used to test the methods. The selection of stations had two criteria: time series longer than 20 years and period of data from 1960 to 2009. The methods were evaluated using cross-validation, linear regression between values observed and interpolated, root mean square error (RMSE), coefficient of determination (r ²), coefficient of variation (CV, %), and the Willmott index of agreement (d). The results from different methods are influenced by the meteorological systems and their seasonality, as well as by the interaction with the topography. The methods presented higher precision (r ²) and accuracy (d, RMSE) during the summer and transition to autumn, in comparison with the winter or spring months. The SPT had the highest precision and accuracy in relation to other methods, in addition to having a good representation of the spatial patterns expected for rainfall over the complex terrain of the state and its high spatial variability.     

Characterisation of Soot Emitted by Domestic Heating,Aircraft and Cars Using Diesel or Biodiesel

The characterisation of aggregates, like soot, firstly requires the determination of the size distribution of the primary particles. The primary particle size of combustion generated aggregates depends upon the combustion environment and the formation conditions, such as temperature, pressure and fuel-to-air ratio, among others. Since the combustion characteristics are different in the different types of burners, the characterisation of primary particles may offer the possibility to distinguish soot from different sources. In this paper, we present the signature of the primary particles and the aggregates of soot emitted by cars using diesel or biodiesel, by domestic heating, and by aircraft exhausts, which can be considered as the major sources as derived from measurements on transmission electron micrographs. The size distributions of all aggregates types with different aerodynamic diameter were log-normal and quasi-monodisperse. The size distribution of the primary particles for soot emitted by different sources showed minor differences. However, a comparison between the diameter of the primary particles and those obtained using a standard method for carbon black revealed discrepancies. The median diameter of the primary particles was combined with the median number of primary particles in an aggregate to calculate the relative particle surface area available for adsorption. In a similar way, the relative specific surface area was determined. The surface area was measured using the Brunauer-Emmett-Teller (B.E.T.) nitrogen adsorption method and the relative surface area available for adsorption was calculated.     

Estimation of Surface-Layer Scaling Parameters in the Unstable Boundary Layer: Implications for Orographic Flow Speed-Up

A method is proposed for estimating the surface-layer depth \((z_s)\) and the friction velocity \((u_*)\) as a function of stability (here quantified by the Obukhov length, L) over the complete range of unstable flow regimes. This method extends that developed previously for stable conditions by Argaín et al. (Boundary-Layer Meteorol 130:15–28, 2009), but uses a qualitatively different approach. The method is specifically used to calculate the fractional speed-up \((\varDelta S)\) in flow over a ridge, although it is suitable for more general boundary-layer applications. The behaviour of \(z_s \left( L\right) \) and \(u_*\left( L\right) \) as a function of L is indirectly assessed via calculation of \(\varDelta S\left( L\right) \) using the linear model of Hunt et al. (Q J R Meteorol Soc 29:16–26, 1988) and its comparison with the field measurements reported in Coppin et al. (Boundary-Layer Meteorol 69:173–199, 1994) and with numerical simulations carried out using a non-linear numerical model, FLEX. The behaviour of \(\varDelta S\) estimated from the linear model is clearly improved when \(u_*\) is calculated using the method proposed here, confirming the importance of accounting for the dependences of \(z_s\left( L \right) \) and \(u_*\left( L \right) \) on L to better represent processes in the unstable boundary layer.     

9. Sedimentation und Tektonik im Rif-Atlas (Spanisch-Marokko)

Ohne Zusammenfassung     

Mid and late Holocene forest fires and deforestation in the subalpine belt of the Iberian range,northern Spain

The conversion of subalpine forests into grasslands for pastoral use is a well-knownphenomenon, although for most mountain areas the timing of deforestation has not been determined. The presence of charcoal fragments in soil profiles affected by shallow landsliding enabled us to date the occurrence of fires and the periods of conversion ofsubalpine forest into grasslands in the Urbión Mountains, Iberian Range, Spain. We found that the treeline in the highest parts of the northwestern massifs of the Iberian Range(the Urbión, Demanda, Neila, and Cebollera massifs) is currently between 1500 and 1600 m a.s.l., probably because of pastoral use of the subalpine belt, whereas in the past it would have reached almost the highest divides(at approximately 2100–2200 m a.s.l.). The radiocarbon dates obtained indicate that the transformation of the subalpine belt occurred during the Late Neolithic, Chalcolithic, Bronze Age, Iron Age, and Middle Ages. Forest clearing was probably moderate during fires prior to the Middle Ages, as the small size of the sheep herds and the local character of the markets only required small clearings, and therefore more limited fires. Thus, it is likely that the forest recovered burnt areas in a few decades; this suggests the management of the forest and grasslands following a slash-andburn system. During the Middle and Modern Ages deforestation and grassland expansion affected most of the subalpine belt and coincided with the increasing prevalence of transhumance, as occurred in other mountains in the Iberian Peninsula(particularly the Pyrenees). Although the occurrence of shallow landslides following deforestation between the Neolithic and the Roman Period cannot be ruled out, the most extensive shallow landsliding processes would have occurred from the Middle Ages until recent times.     

Exploring seven hundred years of transhumance,climate dynamic,fire and human activity through a historical mountain pass in central Spain

A high-altitude peat sequence from the heart of the Spanish Central System (Gredos range) was analysed through a multi-proxy approach to determine the sensitivity of high-mountain habitats to climate, fire and land use changes during the last seven hundred years, providing valuable insight into our understanding of the vegetation history and environmental changes in a mountain pass close to a traditional route of transhumance. The pollen data indicate that the vegetation was dominated by shrublands and grasslands with scattered pines in high-mountain areas, while in the valleys cereals, chestnut and olive trees were cultivated. Strong declines of high-mountain pines percentages are recorded at 1540, 1675, 1765, 1835 and 1925 cal AD, which may be related to increasing grazing activities and/or the occurrence of anthropogenic fires. The practice of mountain summer farming and transhumance deeply changed and redesigned the landscape of the high altitudes in central Spain (Gredos range) since the Middle Ages, although its dynamics was influenced in some way by climate variability of the past seven centuries.     

A first look at the effects of ionospheric signal bending on a globally processed GPS network

This study provides a first attempt at quantifying potential signal bending effects on the GPS reference frame, coordinates and zenith tropospheric delays (ZTDs). To do this, we homogeneously reanalysed data from a global network of GPS sites spanning 14 years (1995.0–2009.0). Satellite, Earth orientation, tropospheric and ground station coordinate parameters were all estimated. We tested the effect of geometric bending and dTEC bending corrections, which were modelled at the observation level based, in part, on parameters from the International Reference Ionosphere 2007 model. Combined, the two bending corrections appear to have a minimal effect on site coordinates and ZTDs except for low latitude sites. Considering five days (DOY 301–305, 28 October–1 November 2001) near ionospheric maximum in detail, they affect mean ZTDs by up to ~1.7 mm at low latitudes, reducing to negligible levels at high latitudes. Examining the effect on coordinates in terms of power-spectra revealed the difference to be almost entirely white noise, with noise amplitude ranging from 0.3 mm (high latitudes) to 2.4 mm (low latitudes). The limited effect on station coordinates is probably due to the similarity in the elevation dependence of the bending term with that of tropospheric mapping functions. The smoothed z-translation from the GPS reference frame to ITRF2005 changes by less than 2 mm, though the effect combines positively with that from the second order ionospheric refractive index term. We conclude that, at the present time, and for most practical purposes, the geometric and dTEC bending corrections are probably negligible at current GPS/reference frame precisions.     

Hydrological characterization of dammed rivers in the NW Mediterranean region

Water scarcity and climatic variability in the Mediterranean region have traditionally required the construction of dams to guarantee water supply for irrigation, industrial and urban uses and hydropower production. Reservoirs affect the hydrology of the river downstream, but the magnitude and persistence of these effects are still poorly unknown. Understanding the magnitude of these effects is the objective of this paper, in which we analyse the flow regimes of twelve rivers located in the NW Mediterranean region. Different temporal scales (daily, monthly and annual) are used for the analysis and also to estimate flow variables associated with flow magnitude, frequency, duration and variability. It is shown that dams alter the hydrological regime of most of the studied rivers, with special influence on monthly flows and flood magnitude and frequency. The most altered rivers (Muga and Siurana, NE Iberian Peninsula) experience a complete overturn in their flow regime with, for instance, flood reduction reaching up to 76% for the 2‐year flood event. Other rivers showed lower changes in hydrology (e.g. Orb and Têt). Annual runoff showed a pattern of decrease in all the studied rivers (regulated and non‐regulated) indicating that besides dams (i.e. reservoir evaporation), other factors likely affect water yield. A general recovery downstream from dams is also observed at all temporal scales, mainly because of the inflow from tributaries. Although dams have a clear impact on the hydrology of Mediterranean rivers, water withdrawals and diversions for irrigation and other consumptive uses also affected the hydrological patterns. Copyright © 2015 John Wiley & Sons, Ltd.     

The June 2013 Alberta catastrophic flooding event – part 2: fine‐scale precipitation and associated features

Data obtained from a variety of sources including the Canadian Lightning Detection Network, weather radars, weather stations and operational numerical weather model analyses were used to address the evolution of precipitation during the June 2013 southern Alberta flood. The event was linked to a mid‐level closed low pressure system to the west of the region and a surface low pressure region initially to its south. This configuration brought warm, moist unstable air into the region that led to dramatic, organized convection with an abundance of lightning and some hail. Such conditions occurred in the southern parts of the region whereas the northern parts were devoid of lightning. Initially, precipitation rates were high (extreme 15‐min rainfall rates up to 102 mm h^?1 were measured) but decreased to lower values as the precipitation shifted to long‐lived stratiform conditions. Both the convective and stratiform precipitation components were affected by the topography. Similar flooding events, such as June 2002, have occurred over this region although the 2002 event was colder and precipitation was not associated with substantial convection over southwest Alberta. Copyright © 2016 Her Majesty the Queen in Right of Canada. Hydrological Processes. © John Wiley & Sons, Ltd.     

Prediction of river water temperature: a comparison between a new family of hybrid models and statistical approaches

River water temperature is a key physical variable controlling several chemical, biological and ecological processes. Its reliable prediction is a main issue in many environmental applications, which however is hampered by data scarcity, when using data‐demanding deterministic models, and modelling limitations, when using simpler statistical models. In this work we test a suite of models belonging to air2stream family, which are characterized by a hybrid formulation that combines a physical derivation of the key equation with a stochastic calibration of parameters. The air2stream models rely solely on air temperature and streamflow, and are of similar complexity as standard statistical models. The performances of the different versions of air2stream in predicting river water temperature are compared with those of the most common statistical models typically used in the literature. To this aim, a dataset of 38 Swiss rivers is used, which includes rivers classified into four different categories according to their hydrological characteristics: low‐land natural rivers, lake outlets, snow‐fed rivers and regulated rivers. The results of the analysis provide practical indications regarding the type of model that is most suitable to simulate river water temperature across different time scales (from daily to seasonal) and for different hydrological regimes. A model intercomparison exercise suggests that the family of air2stream hybrid models generally outperforms statistical models, while cross‐validation conducted over a 30‐year period indicates that they can be suitably adopted for long‐term analyses. Copyright © 2016 John Wiley & Sons, Ltd.