Using gravity and topography-implied anomalies to assess data requirements for precise geoid computation

Many regions around the world require improved gravimetric data bases to support very accurate geoid modeling for the modernization of height systems using GPS. We present a simple yet effective method to assess gravity data requirements, particularly the necessary resolution, for a desired precision in geoid computation. The approach is based on simulating high-resolution gravimetry using a topography-correlated model that is adjusted to be consistent with an existing network of gravity data. Analysis of these adjusted, simulated data through Stokes’s integral indicates where existing gravity data must be supplemented by new surveys in order to achieve an acceptable level of omission error in the geoid undulation. The simulated model can equally be used to analyze commission error, as well as model error and data inconsistencies to a limited extent. The proposed method is applied to South Korea and shows clearly where existing gravity data are too scarce for precise geoid computation.     

The effects of frequency-dependent quasar variability on the celestial reference frame

We examine the relationship between source position stability and astrophysical properties of radio-loud quasars making up the International Celestial Reference Frame (ICRF2). Understanding this relationship is important for improving quasar selection and analysis strategies, and therefore reference frame stability. We construct flux density time series, known as light curves, for 95 of the most frequently observed ICRF2 quasars at both the 2.3 and 8.4 GHz geodetic very long baseline interferometry (VLBI) observing bands. Because the appearance of new quasar components corresponds to an increase in quasar flux density, these light curves alert us about potential changes in source structure before they appear in VLBI images. We test how source position stability depends on three astrophysical parameters: (1) flux density variability at X band; (2) time lag between flares in S and X bands; (3) spectral index root-mean-square (rms), defined as the variability in the ratio between S and X band flux densities. We find that the time lag between S and X band light curves provides a good indicator of position stability: sources with time lags $<$ 0.06 years are significantly more stable ( $>$ 20 % improvement in weighted rms) than sources with larger time lags. A similar improvement is obtained by observing sources with low $(<$ 0.12) spectral index variability. On the other hand, there is no strong dependence of source position stability on flux density variability in a single frequency band. These findings can be understood by interpreting the time lag between S and X band light curves as a measure of the size of the source structure. Monitoring of source flux density at multiple frequencies therefore appears to provide a useful probe of quasar structure on scales important to geodesy. The observed astrometric position of the brightest quasar component (the core) is known to depend on observing frequency. We show how multi-frequency flux density monitoring may allow the dependence on frequency of the relative core positions along the jet to be elucidated. Knowledge of the position–frequency relation has important implications for current and future geodetic VLBI programs, as well as the alignment between the radio and optical celestial reference frames.     

Soil characterization based on land cover heterogeneity over a tropical landscape: an integrated approach using earth observation data-sets

Soil is a vital part of the natural environment and is always responding to changes in environmental factors, along with the influences of anthropogenic factors and land use changes. The long-term change in soil properties will result in change in soil health and fertility, and hence the soil productivity. Hence, the main aim of this paper focuses on the analysis of land use/land cover (LULC) change pattern in spatial and temporal perspective and to present its impact on soil properties in the Merawu catchment over the period of 18?years. Post classification change detection was performed to quantify the decadal changes in historical LULC over the periods of 1991, 2001 and 2009. The pixel to pixel comparison method was used to detect the LULC of the area. The key LULC types were selected for investigation of soil properties. Soil samples were analysed in situ to measure the physicochemical soil properties. The results of this study show remarkable changes in LULC in the period of 18?years. The effect of land cover change on soil properties, soil compaction and soil strength was found to be significant at a level of <0.05.     

Change detection in Sal forest in Dehradun Forest Division using remote sensing and geographical information system

The review of study site have revealed the change in vegetation cover of Sal Dense to Sal Medium and Sal Open in 6 forest Mosaics owing to biotic and abiotic conditions prevailing in the specific areas. Analysis carried out using thematic map derived from aerial photograph of 1976 and satellite data of IRS 1C LISS III False Colour Composite (FCC) of March 1999 revealed the cause for change in forest density classes. Deforestation, encroachment and agriculture have been identified as the underlying causes, which have affected some specific locations to a marked extent. There has been a progressive and remarkable change among vegetation classes from 1976 to 1999. It is evident from forest type and density map that Sal density has significantly reduced from Sal Dense 65.61 % in 1976 to Sal Dense 11.12% in the year 1999 followed by Sal Open 11.18 % and Sal Medium 18.24 %. The overall change has been estimated to be 42.11% of the total forested area.     

Modeling errors in upward continuation for INS gravity compensation

Accurate upward continuation of gravity anomalies supports future precision, free-inertial navigation systems, since the latter cannot by themselves sense the gravitational field and thus require appropriate gravity compensation. This compensation is in the form of horizontal gravity components. An analysis of the model errors in upward continuation using derivatives of the standard Pizzetti integral solution (spherical approximation) shows that discretization of the data and truncation of the integral are the major sources of error in the predicted horizontal components of the gravity disturbance. The irregular shape of the data boundary, even the relatively rough topography of a simulated mountainous region, has only secondary effect, except when the data resolution is very high (small discretization error). Other errors due to spherical approximation are even less important. The analysis excluded all measurement errors in the gravity anomaly data in order to quantify just the model errors. Based on a consistent gravity field/topographic surface simulation, upward continuation errors in the derivatives of the Pizzetti integral to mean altitudes of about 3,000 and 1,500 m above the mean surface ranged from less than 1 mGal (standard deviation) to less than 2 mGal (standard deviation), respectively, in the case of 2 arcmin data resolution. Least-squares collocation performs better than this, but may require significantly greater computational resources.     

Determination of land degradation causes in Tongyu County,Northeast China via land cover change detection

Tongyu County in Northeast China is highly prone to land degradation due to its fragile physical settings characterized by a flat topography, a semi-arid climate, and a shallow groundwater table. This study aims to determine the causes of land degradation through detecting the long-term trend of land cover changes. Degraded lands were mapped from satellite images recorded in 1992 and 2002. These land cover maps revealed that the area subject to land degradation in the form of soil salinization, waterlogging and desertification increased from 2400 to 4214 km², in sharp contrast to most severely degraded land that decreased by 122.5 km². Newly degraded land stems from productive farmland (263 km²), harvested farmland (551 km²), and grassland (468 km²). Therefore, the worsened degradation situation is attributed to excessive reclamation of grassland for farming, over cultivation, overgrazing, and deforestation. Mechanical, biological, ecological and engineering means should be adopted to rehabilitate the degraded land.     

The elastic properties of single-crystal fayalite as determined by dynamical measurement techniques

We present new elasticity measurements on single-crystal fayalite and combine our results with other data from resonance, pulse superposition interferometry, and Brillouin scattering to provide a set of recommended values for the adiabatic elastic moduliC _ij and their temperature variations. We use a resonance method (RPR) with specimens that were previously investigated by pulse superposition experiments. The nineC _ij of fayalite are determined from three new sets of measurements. One set of our newC _ij data is over the range 300–500 K. We believe that the relatively large discrep ncies found in someC _ij are due in large part to specimen inhomogeneities (chemical and microstructural) coupled with differences in the way various techniques sample, rather than only systematic errors associated with experimental procedures or in the preparations of the specimens.Our recommendeaC _ij's (GPa) and (C _ij/T) _p (GPa/K) are: The resulting values for the isotropic bulk and shear moduli,K _s and , and their temperature derivatives are:K _s=134(4) GPa; =50.7(0.3) GPa; (K _s/T) _p =–0.024(0.005) GPa/K; and (/T) _p =–0.013(0.001) GPa/K. An important conclusion is thatK _s increases as the Fe/(Fe+Mg) ratio in olivine is increased.     

Surveillance for previously unmonitored organic contaminants in the San Francisco Estuary

The San Francisco Estuary Regional Monitoring Program initiated surveillance monitoring to identify previously unmonitored synthetic organic contaminants in the San Francisco Estuary. Organic extracts of water samples were analyzed using gas chromatography-mass spectrometry in full scan mode. The major contaminant classes identified in the samples were fire retardants, pesticides, personal care product ingredients, and plasticizers. Evidence from the literature suggests that some of these contaminants can persist in the environment, induce toxicity, and accumulate in marine biota and in higher food chain consumers. The major sources of these contaminants into the marine environment are the discharge of municipal and industrial wastewater effluents, urban stormwater, and agricultural runoff. As a proactive effort, it is suggested that surveillance studies be used routinely in monitoring programs to identify and prevent potential problem contaminants from harming the marine environment.     

Dynamic characteristics and horizontal transports of internal solitons generated at the Columbia River plume front

River plume front-generated internal solitons play an important role in the interaction between the plume and coastal waters. The internal solitons drive a non-harmonic velocity field, resulting in a horizontal transport that carries plume water seaward and redistributes nutrients and sediments. In this study, we present observations of internal solitons generated at the Columbia River plume front that separates the new, tidal plume, older plume and coastal waters. Scale analyses suggest that the plume front-generated internal solitons are highly non-linear waves, and their dynamic properties do not conform to any weakly non-linear theory. Thus, a high-order Korteweg–de Vries (KdV) theory is used to analyze the internal solitons. The comparison between theoretical values and cruise data shows that the high-order KdV model is much better than the weakly non-linear theories for prediction of the soliton dynamic parameters. Based on the model, we develop theoretical and numerical solutions of the soliton-induced upper layer horizontal transport and Lagrangian water parcel transport distance, which shows that the water particle drift, during the internal soliton passage, is as far as 1 km, and demonstrates the role of the internal solitons on the exchange between the plume and ambient coastal water. Energy fluxes caused by the internal solitons are estimated using the high-order KdV theory. The leading soliton fluxes 2.0×10³ W m⁻¹ per unit crest length, and carries energy of 4.2×10⁵ J m⁻¹. The total energy carried by the eight internal solitons is 1.6×10⁶ J m⁻¹, about 70% of the total frontal energy.