Change detection in Sal forest in Dehradun Forest Division using remote sensing and geographical information system

The review of study site have revealed the change in vegetation cover of Sal Dense to Sal Medium and Sal Open in 6 forest Mosaics owing to biotic and abiotic conditions prevailing in the specific areas. Analysis carried out using thematic map derived from aerial photograph of 1976 and satellite data of IRS 1C LISS III False Colour Composite (FCC) of March 1999 revealed the cause for change in forest density classes. Deforestation, encroachment and agriculture have been identified as the underlying causes, which have affected some specific locations to a marked extent. There has been a progressive and remarkable change among vegetation classes from 1976 to 1999. It is evident from forest type and density map that Sal density has significantly reduced from Sal Dense 65.61 % in 1976 to Sal Dense 11.12% in the year 1999 followed by Sal Open 11.18 % and Sal Medium 18.24 %. The overall change has been estimated to be 42.11% of the total forested area.     

Elasticity of tetragonal end-member majorite and solid solutions in the system Mg4Si4O12-Mg3Al2Si3O12

 The adiabatic elastic moduli of polycrystalline En₅₀Py₅₀ and En₈₀Py₂₀ majorite-garnet solid solutions (where En=4MgSiO₃, Py=Mg₃Al₂Si₃O₁₂) and the end-member En₁₀₀ tetragonal majorite were determined at ambient conditions using Brillouin spectroscopy. The adiabatic bulk modulus, K, and shear modulus, μ, of En₅₀Py₅₀ were found to be K=173.1 (20) and μ=92.3 (10) GPa, and are indistinguishable from those of the end-member pyrope, Py₁₀₀. The moduli of the more majorite-rich samples are significantly lower and are virtually identical to each other (K=162.6(11) and μ=85.7(7) for En₈₀Py₂₀; K=166(5) and μ=88(2) for En₁₀₀). In combination with previously reported moduli for this system, we conclude that both K and μ are constant over the compositional range from Py₁₀₀ to a majorite content of about 70–80%, whereupon the moduli decrease substantially. For compositions ranging from En₈₀Py₂₀ to the end-member majorite, the moduli are also approximately independent of composition, but at a lower value. An alternative model with a continuous decrease in moduli with increasing majorite content cannot be excluded, within the uncertainties of existing measurements. The contrast in moduli between aluminous pyrope garnet and Al-free majorite are small compared with the modulus changes accompanying the pyroxene – majorite phase transformation. Received August 16, 1995 /Revised, accepted January 12, 1996     

Byproduct Formation During the Reduction of TCE by Zero-Valence Iron and Palladized Iron

Trichloroethene (TCE) was reduced with zero-valence iron and palladized iron in zero-head-space extractors. Progress of the reaction in these batch studies was monitored with purge-and-trap gas chromatography and a flame ionization detector. When a 5 ppm initial concentration of TCF. reacts with zero-valence iron, approximately 140 ppb of vinyl chloride persists for as long as 73 days. The concentration of vinyl chloride (approximately If) ppb) remaining with palladized iron is approximately an order of magnitude less than when zero-valence iron is the reductant. These data suggest that volatile byproducts may be under-represented in oilier published data regarding reduction with zero-valence metals. These results also demonstrate that the reduction of TCE with palladized iron (0.05 percent palladium) is more than an order of magnitude faster than with zero-valence iron. Wilh a 5:1 solution-to-solid ratio the TCE half-life with zero-valence iron is 7.41 hours. but is only 0.59 hours with the palladized iron.     

The causes and environmental effects of land use conversion during agricultural restructuring in Northeast China

During the last decade of the 20th century, extensive conversion in agricultural land use took place in Northeast China. The goal of this study is to ascertain its spatial distribution and regional differentiation, determine its causes, and analyze its environmental impact. Especially we attempt to elucidate how institutional constraints have facilitated the change at a time of agrarian restructuring when newly emerging free market was hybridized with the former planned economy. Information on six categories of land use was mapped from interpretation of Landsat TM images recorded in 1990, 1995 and 2000. Most of land use changes took place during the first half of the decade, coinciding with abrupt and chaotic changes in government directives. Farmland was changed mainly to woodland, water body and built-up areas while woodland and grassland were converted chiefly to farmland. Spatially, the change from farmland to woodland was restricted to the west of the study area. The change from grassland to farmland took place in the grazing and farming interlocked west. These chaotic and occasionally conflicting changes were largely caused by lack of stability and consistency in agricultural land use policies promulgated. They have exerted adverse impacts on the local environment, including land degradation, increased flooding, and modified climate regime.     

Isotopic variability in the aragonite shells of freshwater gastropods living in springs with nearly constant temperature and isotopic composition

We conducted a year-long, intensive monitoring program of live aquatic gastropods (Helisoma duryi, Melanoides tuberculata, Physa virgata, Pyrgulopsis sp., and Tyronia sp.) and their host springs in the Ash Meadows National Wildlife Refuge of southern Nevada. Our purpose was to constrain the degree of natural variation in the isotopic values of shell aragonite for gastropods living in near-constant conditions. Inter- and intraspecies variations, as well as within-shell variations, of δ¹⁸O and δ¹³C values for all taxa were larger than predicted based on variations in environmental conditions alone. This result suggests that different organisms growing in identical or nearly identical environmental conditions may not produce shells with equilibrium isotopic compositions and that these offsets from equilibrium may differ by small, but statistically significant amounts. For the gill-breathing, fully aquatic gastropods M. tuberculata, Pyrgulopsis sp., and Tyronia sp., the deviation of measured isotopic values compared to predicted values based on average environmental conditions were consistent with differences between taxa in the seasonal timing of shell growth. Measured values for the lung-breathing gastropods H. duryi and P. virgata were higher for δ¹⁸O and lower for δ¹³C than predicted at isotopic equilibrium, even when accounting for seasonality effects. We suggest that explaining the differences between the shell isotopic composition of lung- and gill-breathing snails requires a combination of both behavioral and physiologic factors. Our results illustrate the potential complexities of interpreting stable isotopic data from fossil gastropod shells even when environmental conditions are nearly constant, and place limitations on the paleoenvironmental deductions that can be made from the isotopic measurements on fossil gastropods.     

Lacustrine basin hydrocarbon exploration – current thoughts

Although much of the world's petroleum resource-base is associated with marine systems, regionally lacustrine petroleum systems are important. Individual accumulations may exceed several billion barrels. In each of these cases the oil is derived from a lacustrine source rock and may be produced from either nonmarine or marine reservoir rocks. The purpose of this paper is to describe the factors that control lacustrine source rock development and the nature of lacustrine reservoirs. Lacustrine oils display different physical and chemical characteristics than their marine counterparts. These differences can be related to the nature of their precursor material. Although the nature of the products are different, the geochemical threshold criteria for defining source rocks in both settings are the same because of common expulsion requirements. Commercially significant lacustrine systems require the presence of large, long-lived lakes. Such lake settings are tectonic in origin and restricted to climatic settings where precipitation exceeds evaporation. Within these large lake systems three primary factors determine source rock potential and quality. These factors are primary productivity level, organic preservation potential, and matrix sedimentation rate, which controls the dilution of preserved organic matter. Source rock potential is maximized where both productivity and preservation potential are maximized and sedimentation rate is minimized. To some degree these factors can compensate for each other. Hydrocarbon reservoir potential within lacustrine basins is partially impacted by overall tectonic setting. Within extensional settings, transport distances tend to be limited, with much of the sediment being transported away from the basin. The sediments delivered to the lake are poorly sorted and sedimentologically immature, commonly resulting in poor reservoirs due to both primary properties and their susceptibility to diagenesis. Within rifts better reservoirs tend to develop along platform or flexural margins. Stacking of reservoirs is important in lacustrine systems but baffles and barriers are often present between individual sand units. These barriers form as a result of lake level fluctuations. In compressional settings transport distances tend to be longer, resulting in more mature, better sorted sediments leading to higher quality reservoirs. These reservoirs typically develop in fluvial-deltaic and wave-dominated shoreline settings. Lacustrine carbonate reservoirs are locally important. These carbonates tend to develop during lake level lowstands and are dependent on diagenesis (dissolution and karstification) for porosity and permeability development. Lacustrine reservoirs are often stratigraphically and areally limited and display low individual well production rates. Within pure lacustrine systems exploration opportunities appear to be often restricted by either reservoir presence or quality (i.e., production rates). The best exploration opportunities in lacustrine basins appear to be associated with hybrid systems where a lacustrine source and marine reservoir exist.     

Influences of pika and simulated grazing disturbances on bare patches of alpine meadow in the Yellow River Source Zone

Bare patches in alpine meadow are the main manifestation of its degradation. The change of bare patches in an alpine meadow in the Yellow River Source Zone during 2018-2019 was studied in relation to the disturbances caused by plateau pika(Ochotona curzoniae) population and simulated grazing via artificial mowing both independently and interactively. The disturbance was set at three levels of high, medium and no disturbance(control group). Bare patches were mapped by from unmanned aerial vehicle(UAV) images with fine resolution of 1 cm obtained in August 2018 and August 2019 in ArcGIS. The results showed that the total area of bare patches decreased by 112.05 m~2 in sub-plots devoid of pika disturbance but increased by 126.37 m~2 in other subplots. The highest rate of increase is 89.02%. The individual effect of pika exceeds the joint effect of pika and mowing disturbances. The sole effect of mowing is lower than the joint effect of pika disturbance and intensive mowing, but higher than the joint influence of pika disturbance and moderate mowing. Strong pika disturbance(14 per sub-plot) caused the influence of mowing from moderate to intensive to increase by five-fold. The area of bare patches treated with moderate mowing and no pika disturbance decreased at the highest pace(-37.22%). Intensive mowing and medium density pikas(100 pikas/ha) are considered the thresholds at which the bare patches start to expand. Even if the meadow is mowed at the medium and high intensity, the area of bare patches can be significantly reduced if plateau pika population is controlled to a low level. ANOVA analysis and longterm macro-scale satellite-derived results reveal that pika disturbance is more important in causing the bare patches to change than simulated grazing. Therefore, it is more important to control the number of pikas than to reduce grazing intensity to prevent the expansion of bare patches in the degraded alpine meadow in the study area.     

Experimental study of quartz inclusions in garnet at pressures up to 3.0 GPa: evaluating validity of the quartz-in-garnet inclusion elastic thermobarometer

Garnet crystals with quartz inclusions were hydrothermally crystallized from oxide starting materials in piston–cylinder apparatuses at pressures from 0.5 to 3 GPa and temperatures ranging from 700 to 800 °C to study how entrapment conditions affect remnant pressures of quartz inclusions used for quartz-in-garnet (QuiG) elastic thermobarometry. Systematic changes of the 128, 206 and 464 cm^?1 Raman band frequencies of quartz were used to determine pressures of quartz inclusions in garnet using Raman spectroscopy calibrations that describe the P–T dependencies of Raman band shifts for quartz under hydrostatic pressure. Within analytical uncertainties, inclusion pressures calculated for each of the three Raman band frequencies are equivalent, which suggests that non-hydrostatic stress effects caused by elastic anisotropy in quartz are smaller than measurement errors. The experimental quartz inclusions have pressures ranging from ??0.351 to 1.247 GPa that span the range of values observed for quartz inclusions in garnets from natural rocks. Quartz inclusion pressures were used to model P–T conditions at which the inclusions could have been trapped. The accuracy of QuiG thermobarometry was evaluated by considering the differences between pressures measured during experiments and pressures calculated using published equation of state parameters for quartz and garnet. Our experimental results demonstrate that Raman measurements performed at room temperature can be used without corrections to estimate garnet crystallization pressures. Calculated entrapment pressures for quartz inclusions in garnet are less than ~?10% different from pressures measured during the experiments. Because the method is simple to apply with reasonable accuracy, we expect widespread usage of QuiG thermobarometry to estimate crystallization conditions for garnet-bearing silicic rocks.     

Simulation of urban expansion via integrating artificial neural network with Markov chain – cellular automata

Accurate simulations and predictions of urban expansion are critical to manage urbanization and explicitly address the spatiotemporal trends and distributions of urban expansion. Cellular Automata integrated Markov Chain (CA-MC) is one of the most frequently used models for this purpose. However, the urban suitability index (USI) map produced from the conventional CA-MC is either affected by human bias or cannot accurately reflect the possible nonlinear relations between driving factors and urban expansion. To overcome these limitations, a machine learning model (Artificial Neural Network, ANN) was integrated with CA-MC instead of the commonly used Analytical Hierarchy Process (AHP) and Logistic Regression (LR) CA-MC models. The ANN was optimized to create the USI map and then integrated with CA-MC to spatially allocate urban expansion cells. The validated results of kappa and fuzzy kappa simulation indicate that ANN-CA-MC outperformed other variously coupled CA-MC modelling approaches. Based on the ANN-CA-MC model, the urban area in South Auckland is predicted to expand to 1340.55 ha in 2026 at the expense of non-urban areas, mostly grassland and open-bare land. Most of the future expansion will take place within the planned new urban growth zone.