The search for fullerenes in rocks from the Ries impact crater

Abstract— Since their discovery, fullerenes have been reported from various geological environments. One group of these findings has been related to bolide impacts, e.g., the Sudbury crater and the K‐T and P‐T boundaries. Impact rocks of the Ries crater, Germany, including samples of suevites, metamorphosed crystalline clasts, and glass bombs, have been collected in the Otting, Altebürg, and Seelbronn quarries. No fullerenes in concentrations above 1 ppb have been found in analyzed samples. Laser desorption time‐of‐flight mass spectrometry (LD‐TOF‐MS) confirmed the absence of fullerenes in the analyzed samples. These results support the concept that the Ries impactor was a stony meteorite.     

Radioisotopic dating of the Tortonian Global Stratotype Section and Point: implications for intercalibration of 40Ar/39Ar and astronomical dating methods

In this paper we present new ⁴⁰Ar/³⁹Ar data of volcanic ash layers intercalated in the astronomically dated sections of Monte dei Corvi and Monte Gibliscemi (Italy) to obtain better radioisotopic time constraints on the Serravallian/Tortonian boundary and to confirm the intercalibration of radioisotopic and astronomical time proposed by Kuiper et al. [2004 ; Fish Canyon Tuff (FCT)-sanidine at 28.21 ± 0.03 Ma]. The latter intercalibration is supported by astronomically calibrated FCT sanidine ages for two ash layers at Monte Gibliscemi (GiF-1: 28.28 ± 0.04; GiD-3: 28.16 ± 0.04 Ma; ±1 SE). As a consequence, our results support the astronomically calibrated age of 11.608 Ma for the Tortonian Global Stratotype Section and Point and, hence, the tuning of the Serravallian/Tortonian boundary interval. The Ancona and Respighi levels at Monte dei Corvi give a more diffuse picture, possibly because of contamination with detrital or xenocrystic material and the inferior quality of biotite for intercalibration purposes.     

Late Cenozoic evolution of the western Barents Sea-Svalbard continental margin

Seven regionally correlatable reflectors, named R7 (oldest) to R1, have been identified in the Upper Cenozoic sedimentary succession along the western continental margin of Svalbard and the Barents Sea. Regional seismic profiles have been used to correlate between submarine fans that comprise major depocentres in this region. Glacial sediment thicknesses reach up to 3 seconds two-way time, corresponding to 3.5–4 km. Despite limited chronostratigraphic control, ages have been assigned to the major sequence boundaries based on ties both to exploration wells and to shallow boreholes, and by paleoenvironmental interpretations and correlations with other regions. Lateral and vertical variations in seismic facies, between stratified and chaotic with slump structures, have major implications for the interpretation of the depositional regime along the margin. The main phases of erosion and deposition at different segments of the margin are discussed in the paper, which also provides a regional seismic stratigraphic framework for two complementary papers in the present volume. Reflector R7 marks the onset of extensive continental shelf glaciations, but whereas the outer Svalbard shelf has been heavily and frequently glaciated since R7 time, this did not occur, or occurred to a much less extent, until R5 time in the southern Barents Sea. The present study provides the background for a quantification of the late Cenozoic glacial erosion of Svalbard and the Barents Sea. The rates of erosion and deposition exhibit large temporal and spatial variations reflecting the importance of glacial processes in the Late Cenozoic development of this nearly 1000 km long margin.     

HI shells in the Leiden-Dwingeloo HI survey

An algorithm of an automatic search for HI shells is presentedand results of identifications in the Leiden-DwingelooHI survey are shown. An identification algorithm searches forlocal minima in channel maps, then creates 3-dimensional objects,HI holes. There is no a priori constraint on the shape of an HI hole, only the dimension criterion: dimensions of the structuremust lie in a preselected interval.When this algorithm is applied to the Leiden-Dwingeloo HI survey,it finds about 1000 structures, which are seen in 4 or more consecutivevelocity channels (Δ v ≥ 4 kms^-1. A total energy contained in all structures in the Milky Way is of theorder of 10⁵⁵ erg, which is less than the energy correspondingto the observed SNR. 80% of the energy contained in holes resides at low galactic z-coordinates, |z|<2 kpc.     

Ground fissures within the Main Ethiopian Rift: Tectonic,lithological and piping controls

Ground fissures, especially if they open due to a sudden collapse of the surface, is a serious risk for populated areas. Their common occurrence in unconsolidated sediments of the Main Ethiopian Rift was found to be mostly a result of piping. The fissures start by piping in linear sub-horizontal underground voids, which often propagate upwards resulting in ceiling collapse and formation of deep and long ground fissures with vertical walls. In the southern and central Main Ethiopian Rift the fissures pose a serious risk to infrastructure and settlements. The ground fissures are often linear (up to several kilometres long and often tens of metres deep) and accompanied by sinkholes (along the length). A detailed field mapping of the geological (rock composition, orientation and character of lithological boundaries, primary fabrics and brittle structures) and geomorphological features (especially a length, width and depth of fissures, sinkholes and gullies) followed by in situ seismic anisotropy measurements and a laboratory determination of the geomechanical properties of volcanoclastic deposits was carried out to investigate the ground fissures' origin. The conditions and factors leading to the formation of the ground fissures have been linked to: (a) the presence of regional normal faults and the associated extensional joints and (b) the alternation of lithological units with contrasting hydraulic permeability. The latter corresponds to a sequence of less permeable hard rocks (e.g., rhyolitic ignimbrites) overlain by heterogeneous, soft and permeable, unconsolidated volcaniclastic deposits with a low amount of clay (less than 10%). The ground fissures' occurrence has shown affiliation to areas which have a significantly high seismic anisotropy (more than 20% at the study sites), which can be used as a proxy to map out high risk areas prone to piping and ground fissure formation.     

A cloud mask methodology for high resolution remote sensing data combining information from high and medium resolution optical sensors

This study presents a novel cloud masking approach for high resolution remote sensing images in the context of land cover mapping. As an advantage to traditional methods, the approach does not rely on thermal bands and it is applicable to images from most high resolution earth observation remote sensing sensors. The methodology couples pixel-based seed identification and object-based region growing. The seed identification stage relies on pixel value comparison between high resolution images and cloud free composites at lower spatial resolution from almost simultaneously acquired dates. The methodology was tested taking SPOT4-HRVIR, SPOT5-HRG and IRS-LISS III as high resolution images and cloud free MODIS composites as reference images. The selected scenes included a wide range of cloud types and surface features. The resulting cloud masks were evaluated through visual comparison. They were also compared with ad-hoc independently generated cloud masks and with the automatic cloud cover assessment algorithm (ACCA). In general the results showed an agreement in detected clouds higher than 95% for clouds larger than 50 ha. The approach produced consistent results identifying and mapping clouds of different type and size over various land surfaces including natural vegetation, agriculture land, built-up areas, water bodies and snow.     

Contrasting punctuated zircon growth in two syn-erupted rhyolite magmas from Tarawera volcano: Insights to crystal diversity in magmatic systems

Two mineralogically and chemically distinct rhyolite magmas (T1 and T3) were syn-erupted from the same conduit system during the 21.9 ka basalt intrusion-triggered Okareka eruption from Tarawera volcano, New Zealand. High spatial resolution U–Th disequilibrium dating of zircon crystals at the ~ 3–5 μm scale reveals a protracted yet discontinuous zircon crystallization history within the magmatic system. Both magma types contain zircon whose interiors predate the eruption by up to 200 ka. The dominant age peak in the T1 magma is ~ 30 ka with subordinate peaks at ~ 45, ~ 75, and ~ 100 ka, whereas the T3 magma has a dominant zircon interior age peak at ~ 90 ka with smaller modes at ~ 35 and ~ 150 ka. These patterns are consistent with isolated pockets of crystallization throughout the evolution of the system. Crystal rim analyses yield ages ranging from within error of the eruption age to at least ~ 90 ka prior to eruption, highlighting that zircon crystallization frequently stalled long before the eruption. Continuous depth profiling from crystal rims inward demonstrates protracted growth histories for individual crystals (up to ~ 100 ka) that were punctuated by asynchronous hiatuses of up to 30 ka in duration. Disparate zircon growth histories can result from localized thermal perturbations caused by mafic intrusions into a silicic reservoir. The crystal age heterogeneity at hand-sample scale requires considerable crystal transport and mixing. We propose that crystal mixing was achieved through buoyancy instabilities caused by mafic magma flow through crystal mush. A terminal pre-eruptive rejuvenation event was capable of mobilizing voluminous melts that erupted, but was too short (< 10²–10³ years) to result in extensive zircon growth. The contrasting, punctuated zircon histories argue against closed-system fractional crystallization models for silicic magmatism that require protracted cooling times following a mostly liquid starting condition.     

Early warning indicators for river nutrient and sediment loads in tropical seagrass beds: a benchmark from a near-pristine archipelago in Indonesia

In remote, tropical areas human influences increase, potentially threatening pristine seagrass systems. We aim (i) to provide a bench-mark for a near-pristine seagrass system in an archipelago in East Kalimantan, by quantifying a large spectrum of abiotic and biotic properties in seagrass meadows and (ii) to identify early warning indicators for river sediment and nutrient loading, by comparing the seagrass meadow properties over a gradient with varying river influence. Abiotic properties of water column, pore water and sediment were less suitable indicators for increased sediment and nutrient loading than seagrass properties. Seagrass meadows strongly responded to higher sediment and nutrient loads and proximity to the coast by decreasing seagrass cover, standing stock, number of seagrass species, changing species composition and shifts in tissue contents. Our study confirms that nutrient loads are more important than water nutrient concentrations. We identify seagrass system variables that are suitable indicators for sediment and nutrient loading, also in rapid survey scenarios with once-only measurements.