Geological processes and site structure: Assessing integrity at a Late Paleolithic open‐air site in northern France

The difficulty of reading the archaeological record of caves and rock shelters is becoming increasingly obvious to Paleolithic researchers. Although some open‐air sites are thought to avoid such taphonomic complications, interpreting their archaeological record is less straightforward than assumed. Postdepositional processes may obscure structure in configurations of features and artifacts. Recently developed techniques for the excavation and analysis of Paleolithic cave sites can be applied to open‐air sites before spatial patterning is interpreted for inferences about prehistoric social organization. Analysis of the orientation of elongated artifacts on the occupation surface of the late Upper Paleolithic site of Verberie, France, is employed for evaluation of the integrity of site structure. Results indicate spatial structure largely undisturbed by geological processes. The lack of disturbance in the configuration of archaeological materials allows for a behavioral interpretation of those remains. The proposition that Verberie was a hunting campsite for initial carcass processing is supported. © 2006 Wiley Periodicals, Inc.     

A Holocene record of climate change,fire ecology and human activity from montane Flat Top Bog,Maui

A sediment core from a high-elevation bog on Maui in the Hawaiian Islands contains evidence for drier conditions between 9.4–5.8 kyr BP, followed by a wetter interval between 5.8–2.2 kyr BP, and a variable late Holocene. These precipitation changes may be a reflection of vertical displacements of the upper boundary of the mid-Pacific Trade Wind Inversion (TWI) cloud layer. Fires, probably volcanically ignited, occurred in the forests prior to human arrival. Polynesian activity in this high-elevation, remote site was apparently limited, with no pollen, charcoal, or sedimentological evidence for local anthropogenic disturbance. After European contact, grass fires increased and introduced plant species invaded the site. Values for Cd, Cu, Pb, and Zn in sediments throughout the Holocene indicate low trace-metal deposition from atmospheric particulates at the site, even in the twentieth century.This paper is one of a series of papers guest edited by Dr. Mark Brenner on tropical paleolimnology     

Petrology of basalts from Loihi Seamount,Hawaii

Loihi Seamount is the southeasternmost active volcano of the Emperor-Hawaii linear volcanic chain. It comprises a spectrum of basalt compositional varieties including basanite, alkali basalt, transitional basalt and tholeiite. Samples from four dredge collections made on Scripps Institution of Oceanography Benthic Expedition in October 1982 are tholeiite. The samples include highly vesicular, olivine-rich basalt and dense glass-rich pillow fragments containing olivine and augite phenocrysts. Both quartz-normative and olivine-normative tholeiites are present. Minor and trace element data indicate relatively high abundances of low partition coefficient elements (e.g., Ti, K, P. Rb, Ba, Zr) and suggest that the samples were derived by relatively small to moderate extent of partial melting, of an undepleted mantle source. Olivine composition, MgO, Cr and Ni abundances, and Mg/(Mg+Fe), are typical of moderately fractionated to relatively unfractionated “primary” magmas. The variations in chemistry between samples cannot be adequately explained by low-pressure fractional crystallization but can be satisfied by minor variations in extent of melting if a homogeneous source is postulated. Alternatively, a heterogeneous source with variable abundances of certain trace elements, or mixing of liquids, may have been involved. Data for ³He/⁴He, presented in a separate paper, implies a mantle plume origin for the helium composition of the Loihi samples. There is little variation in the helium isotope ratio for samples having different compositions and textures. The helium data are not distinctive enough to unequivocally separate the magma sources for the tholeiitic rocks from the other rock types such as Loihi alkalic basalts and the whole source region for Loihi may have a nearly uniform helium compositions even though other element abundances may be variable. Complex petrologic processes including variable melting, fractional crystallization and magma mixing may have blurred original helium isotopic signatures.     

Meso-scale testing and development of test procedures to maintain mass balance

The Conrad Blucher Institute for Surveying and Science (Texas A&M University––Corpus Christi) has conducted numerous petroleum experiments at the Shoreline Environmental Research Facility (Corpus Christi, Texas, USA). The meso-scale facility has multiple wave tanks, permitting some control in experimental design of the investigations, but allowing for real-world conditions. This paper outlines the evolution of a materials balance approach in conducting petroleum experiments at the facility. The first attempt at a materials balance was during a 1998 study on the fate/effects of dispersant use on crude oil. Both water column and beach sediment samples were collected. For the materials balance, the defined environmental compartments for oil accumulation were sediments, water column, and the water surface, while the discharge from the tanks was presumed to be the primary sink. The “lessons learned” included a need to quantify oil adhesion to the tank surfaces. This was resolved by adhering strips of the polymer tank lining to the tank sides that could be later removed and extracted for oil. Also, a protocol was needed to quantify any floating oil on the water surface. A water surface (oil slick) quantification protocol was developed, involving the use of solid-phase extraction disks. This protocol was first tested during a shoreline cleaner experiment, and later refined in subsequent dispersant effectiveness studies. The effectiveness tests were designed to simulate shallow embayments which created the need for additional adjustments in the tanks. Since dispersant efficacy is largely affected by hydrodynamics, it was necessary to scale the hydrodynamic conditions of the tanks to those expected in our prototype system (Corpus Christi Bay, Texas). The use of a scaled model permits the experiment to be reproduced and/or evaluated under different conditions. To minimize wave reflection in the tank, a parabolic wave dissipater was built. In terms of materials balance, this design reduced available surface area as a sink for oil adsorption.     

A hybrid approach to modeling territorial control in violent armed conflicts

Territorial control is central to the understanding of violent armed conflicts, yet reliable and valid measures of this concept do not exist. We argue that geospatial analysis provides an important perspective to measure the concept. In particular, measuring territorial control can be seen as an application of calculating service areas around points of control. The modeling challenge is acute for areas with limited road infrastructure, where no complete network is available to perform the analysis, and movements largely occur off road. We present a new geospatial approach that applies network analysis on a hybrid transportation network with both actual road data and hexagon‐fishnet‐based artificial road data representing on‐road and off‐road movements, respectively. Movement speed or restriction can be readily adjusted using various input data. Simulating off‐road movement with hexagon‐fishnet‐based artificial road data has a number of advantages including scalability to small or large study areas and flexibility to allow all‐directional travel. We apply this method to measuring territorial control of armed groups in Sub‐Saharan Africa where inferior transport infrastructure is the norm. Based on the Uppsala Conflict Data Program's (UCDP) Georeferenced Event Data (GED) as well as spatial data on terrain, population locations, and limited transportation networks, we enhance the delineation of the specific areas directly controlled by each warring party during civil wars within a given travel time.     

SIMD correlator library for GNSS software receivers

Software receivers have had a discernable impact on the GNSS research community. Often such receivers are implemented in a compiled programming language, such as C or C++. A software receiver must emulate the digital signal processing (DSP) algorithms executed on dedicated hardware in a traditional receiver. The DSP algorithms, most notably correlation, have a high computational cost; this burden precludes many software receivers from running in real time. However, the computational cost can be lessened by utilizing single instruction multiple data (SIMD) operations found on modern ×86 processors. The following demonstrates how C/C++ compatible code can be written to directly utilize the SIMD instructions. First, an analysis is carried out to demonstrate why real time operation is not possible when using traditional C/C++ code is carried out. Secondly a tutorial outlines how to write and insert ×86 assembly, with SIMD operations, into C/C++ code. Performance gains achieved via SIMD operations are then demonstrated, and pseudo code outlines how SIMD operations can be employed to perform correlation. Finally, a C/C++ compatible SIMD enabled arithmetic library is added to the GPS Toolbox for use in software receivers.     

Application of a nonlinear frequency domain wave–current interaction model to shallow water recurrence effects in random waves

The effect of ambient currents on nearshore nonlinear wave–wave energy transfer in random waves is studied with the use of a nonlinear frequency domain wave–current interaction model. We focus on the phenomenon of wave recurrence as a classical nonlinear phenomenon whose characteristics are well established for systems truncated to small numbers of frequency modes. The model used for this study is first extended to enhance accuracy; comparisons of permanent form solutions to analytical forms confirm the model accuracy. Application of the model to a highly truncated system confirmed the model’s consistency with published results for both positive (following) and negative (adverse) currents. Propagation of random wave spectra over a flat bottom was performed with the model, with the intent of determining the prevalence of recurrence between the spectral peak and its harmonics. For spectra of moderate Ursell number, it was found that positive currents extended the length scale of recurrence relative to the case with no currents; conversely, negative currents reduced the recurrence lengths. However, beyond a propagation distance of ≈40 wavelengths of the spectral peak, recurrence becomes almost completely damped as the spectra becomes broad and the spectral energies equilibrate. For spectra of high Ursell number, in contrast, recurrence is almost immediately damped, suggesting that the nonlinearity is sufficient to allow immediate spectral broadening and equilibration and overwhelming any preferential interactions among the spectral peak and its harmonics, regardless of current magnitude or direction.