The role of technology for achieving climate policy objectives: overview of the EMF 27 study on global technology and climate policy strategies

This article presents the synthesis of results from the Stanford Energy Modeling Forum Study 27, an inter-comparison of 18 energy-economy and integrated assessment models. The study investigated the importance of individual mitigation options such as energy intensity improvements, carbon capture and storage (CCS), nuclear power, solar and wind power and bioenergy for climate mitigation. Limiting the atmospheric greenhouse gas concentration to 450 or 550 ppm CO₂ equivalent by 2100 would require a decarbonization of the global energy system in the 21^st century. Robust characteristics of the energy transformation are increased energy intensity improvements and the electrification of energy end use coupled with a fast decarbonization of the electricity sector. Non-electric energy end use is hardest to decarbonize, particularly in the transport sector. Technology is a key element of climate mitigation. Versatile technologies such as CCS and bioenergy are found to be most important, due in part to their combined ability to produce negative emissions. The importance of individual low-carbon electricity technologies is more limited due to the many alternatives in the sector. The scale of the energy transformation is larger for the 450 ppm than for the 550 ppm CO₂e target. As a result, the achievability and the costs of the 450 ppm target are more sensitive to variations in technology availability.     

Uncertainty analysis for the integration of seismic and controlled source electro‐magnetic data

We study the appraisal problem for the joint inversion of seismic and controlled source electro‐magnetic (CSEM) data and utilize rock‐physics models to integrate these two disparate data sets. The appraisal problem is solved by adopting a Bayesian model and we incorporate four representative sources of uncertainty. These are uncertainties in 1) seismic wave velocity, 2) electric conductivity, 3) seismic data and 4) CSEM data. The uncertainties in porosity and water saturation are quantified by a posterior random sampling in the model space of porosity and water saturation in a marine one‐dimensional structure. We study the relative contributions from the four individual sources of uncertainty by performing several statistical experiments. The uncertainties in the seismic wave velocity and electric conductivity play a more significant role on the variation of posterior uncertainty than do the seismic and CSEM data noise. The numerical simulations also show that the uncertainty in porosity is most affected by the uncertainty in the seismic wave velocity and that the uncertainty in water saturation is most influenced by the uncertainty in electric conductivity. The framework of the uncertainty analysis presented in this study can be utilized to effectively reduce the uncertainty of the porosity and water saturation derived from the integration of seismic and CSEM data.     

Geotectonic framework of Permo–Triassic magmatism within the Korean Peninsula

This study presents sensitive high-resolution ion microprobe (SHRIMP) U–Pb zircon ages, and whole-rock chemical and isotopic (Sr-Nd) compositions of representative Triassic plutons from South Korea. The plutons from the Gyeonggi massif (Hongseong, Namyang, Yangpyeong and Odesan), the central Okcheon belt (Baeknok and Yongsan), and the Yeongnam massif (Sangju, Gimcheon, Hamyang and Macheon) yield zircon U–Pb ages of ca. 232–226 Ma, 227–226 Ma, and 240–228 Ma, respectively. Among the Triassic plutonic suite in South Korea, those within the Gyeonggi massif are dominated by granite, syenite, monzonite, monzodiorite and gabbro. Plutons within the Okcheon belt are mainly by granite to quartz monzodiorite. The Yeongnam massif mainly incorporates granite to granodiorite and minor monzodiorite intrusions. The geochemical signatures of the Triassic plutons are characterized by Ta–Nb troughs, depletion of P and Ti, and enrichment of LILE. Most plutons except Macheon monzodioritic pluton show high initial ⁸⁷Sr/⁸⁶Sr ratios (0.708248–0.714678) and strongly negative ε_Nd(T) (− 20.3 to − 7.7) values, suggesting contribution from middle to upper crust. In contrast, the Macheon monzodioritic pluton in the Yeongnam massif shows relatively low initial ⁸⁷Sr/⁸⁶Sr ratios (0.706547-0.706629) and negative ε_Nd(T) (− 4.43 to − 3.62) values. The Middle Triassic syenite–monzonite–granite–gabbro series in and around the Gyeonggi massif possess high-K calc-alkaline and shoshonitic affinity suggesting a post-collisional magmatic event following the Permo–Triassic collision between the North and South China blocks. The Triassic plutons in the Yeongnam massif and the Okcheon belt, together with a Permian Yeongdeok pluton in the Gyeongsang basin, show features typical of high- to medium-K calc-alkaline magmatism with LREE and LILE enrichments. This together with a depletion of Y and HREE suggests their formation in a subduction setting. Our results provide robust evidence to consider the Gyeonggi massif as an extension of the Qinling–Dabie–Sulu belt between the North and South China blocks in central China. The Okcheon belt and Yeongnam massif in South Korea, together with the continental margin of South China, are marked by a common Permian to Triassic magmatic episode, probably related to the paleo-Pacific slab subduction.     

Stabilization of arsenic-contaminated mine tailings using natural and calcined oyster shells

Natural oyster shells (NOS) and calcined oyster shells (COS) were used to immobilize arsenic (As) from contaminated mine tailings. In addition, a blend of Portland cement (PC)/cement kiln dust (CKD) was used as a stabilizing agent. The Korean Standard Test (KST) method (1 N HCl extraction) was used to evaluate the effectiveness of the treatment. The experimental results showed that COS effectively immobilized As in treated mine tailings. Specifically, an As concentration less than 1 mg L⁻¹ was obtained following COS treatment at 25 and 30 wt%. However, all the samples subjected to NOS treatments failed the Korean warning standard of 1.2 mg L⁻¹ after 28 days of curing. All of the COS-PC treatments were successful meeting the Korean warning standard after 7 days of curing. However, the PC-only treatment failed to meet the Korean warning standard. Similarly, the CKD-only treatment was failed to meet the Korean warning standard after 7 days of curing. However, the COS-CKD treatment showed that when the COS content was greater than 20 wt%, less than 1 mg L⁻¹ of As leachability was obtained. Scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM–EDX) showed needle-like and torpedo-like Ca–As phases in the COS-treated samples suggesting that As was strongly associated with Ca and O. X-ray absorption near edge structure (XANES) analyses confirmed that As(V) was prevalent in the tailings and that there were no changes in As speciation following NOS or COS treatment.     

Storm‐coverage effect on dynamic flood‐frequency analysis: empirical data analysis

In this study, a dynamic flood‐frequency analysis model considering the storm coverage effect is proposed and applied to six sub‐basins in the Pyungchang River basin, Korea. The model proposed is composed of the rectangular pulse Poisson process model for rainfall, the Soil Conservation Service curve number method for infiltration and the geomorphoclimatic instantaneous unit hydrograph for runoff estimation. Also, the model developed by Marco and Valdes is adopted for quantifying the storm‐coverage characteristics. By comparing the results from the same model with and without the storm‐coverage effect consideration, we could quantify the storm‐coverage effect on the flood‐frequency analysis. As a result of that, we found the storm‐coverage effect was so significant that overestimation of the design flood was unavoidable without its consideration. This also becomes more serious for larger basins where the probability of complete storm coverage is quite low. However, for smaller basins, the limited number of rain gauges is found to hamper the proper quantification of the storm‐coverage characteristics. Provided with a relationship curve between the basin size and the storm coverage (as in this study), this problem could be overcome with an acceptable accuracy level. Copyright © 2003 John Wiley & Sons, Ltd.     

Seismically induced changes in groundwater levels and temperatures following the ML5.8 (ML5.1) Gyeongju earthquake in South Korea

Hydrogeological responses to earthquakes such as changes in groundwater level, temperature, and chemistry, have been observed for several decades. This study examines behavior associated with M_L 5.8 and M_L 5.1 earthquakes that occurred on 12 September 2016 near Gyeongju, a city located on the southeast coast of the Korean peninsula. The M_L 5.8 event stands as the largest recorded earthquake in South Korea since the advent of modern recording systems. There was considerable damage associated with the earthquakes and many aftershocks. Records from monitoring wells located about 135 km west of the epicenter displayed various patterns of change in both water level and temperature. There were transient-type, step-like-type (up and down), and persistent-type (rise and fall) changes in water levels. The water temperature changes were of transient, shift-change, and tendency-change types. Transient changes in the groundwater level and temperature were particularly well developed in monitoring wells installed along a major boundary fault that bisected the study area. These changes were interpreted as representing an aquifer system deformed by seismic waves. The various patterns in groundwater level and temperature, therefore, suggested that seismic waves impacted the fractured units through the reactivation of fractures, joints, and microcracks, which resulted from a pulse in fluid pressure. This study points to the value of long-term monitoring efforts, which in this case were able to provide detailed information needed to manage the groundwater resources in areas potentially affected by further earthquakes.

     

Material characteristics and building technique for the rammed earth wall of the 13th Korean fortress in Ganghwa

This study identifies the technique applied for building the rammed earth wall of the 13th Korean fortress, Ganghwa Jungseong, by analyzing its physical, mineralogical, granulometric, and geochemical characteristics. Furthermore, mutual homogeneities between the rammed earth wall and host rock, top soil, and sub-surface soil collected around the fortress were interpreted. The ground of the rammed earth wall was not created artificially but made via soil preparations containing loamy soils from weathered bedrock. The foundation part was built using various layers of soils having different colors, magnetic susceptibilities, particle sizes, and organic components. In particular, a layer of loamy saprolite was generated to enhance the stability of the foundation and improve ventilation and draining throughout the structure. The body of the wall is composed of silty loam at the bottom and silty loam to loam from the middle to the top. Techniques that alternately harden soils using different particle sizes enable external shock absorption and prevent crack formation owing to temperature changes during winter and summer. The rammed earth wall and the soils around the fortress contained related rock-forming materials had similar magnetic susceptibilities and geochemical characteristics, which indicated that they have a genetically common source. Moreover, the rammed earth wall was built using the soil weathered from the banded gneiss because it was correlated to the banded gneiss constituting the bedrock around the fortress.     

Effects of Light,Salinity and Temperature on Germination Characteristics of Surfgrass,Phyllospadix japonicus and P. iwatensis Seeds

Ocean Science Journal - Surfgrass (Phyllospadix spp.) is a marine flowering plant that attaches to the bedrock of the Pacific Ocean, where the tide is fast and the waves are strong. In Korea, two...     

Sorption of cesium and iodide ions onto KENTEX-bentonite

The sorption of cesium and iodide ions onto KENTEX-bentonite was investigated using batch test and in-diffusion test methods. The cesium ions were highly sorbed on the bentonite, and the experimental data fit the Freundlich isotherm well. The distribution coefficient, K _d, of the cesium ions was variably affected by the chemical conditions of the solution (initial ion concentration, pH, salinity) and temperature. An increasing pH of solution increased the K _d. However, there were different K _d values that decrease with an increase in the initial ion concentration, salinity, and temperature. The iodide ions, on the contrary, were negligibly sorptive. The K _d values obtained from the in-diffusion tests were quite lower than those from the batch tests, which could be explained by changes in the pore water chemistry and surface area available for sorption.