A modeling framework for the design of collector wells

We present results of a design study performed for the Saylorville Wellfield in Iowa, which is owned and operated by the Des Moines Water Works. The purpose of this study was to estimate wellfield capacity and provide a preliminary design for two radial collector wells to be constructed in the outwash aquifer along the Des Moines River near Saylorville, Iowa. After a field investigation to characterize the aquifer, regional two-dimensional and local three-dimensional, steady-state groundwater flow modeling was performed to locate and design the wells. This modeling was the foundation for design recommendations based on the relative performance of 12 collector well designs with varying lateral numbers, elevations, screen lengths, and orientations. For each site, alternate designs were evaluated based on model estimates of the capacity, the percent of surface water captured, and the production per unit length of screen. Many of our results are consistent with current design practices based on experience and intuition, but our methods allow for a quantitative approach for comparing alternate designs. Although the results are site-specific, the framework for evaluating the hydraulic design of the Saylorville radial collector wells is broadly applicable and could be used at other riverbank filtration sites. In addition, many of the conclusions from this design study may apply at other sites where construction of radial collector wells is being considered.     

Response prediction,experimental characterization and P‐spectra design of frames with viscoelastic–plastic dampers

Viscoelastic–plastic (VEP) dampers are hybrid passive damping devices that combine the advantages of viscoelastic and hysteretic damping. This paper first formulates a semi‐analytical procedure for predicting the peak response of nonlinear SDOF systems equipped with VEP dampers, which forms the basis for the generation of Performance Spectra that can then be used for direct performance assessment and optimization of VEP damped structures. This procedure is first verified against extensive nonlinear time‐history analyses based on a Kelvin viscoelastic model of the dampers, and then against a more advanced evolutionary model that is calibrated to characterization tests of VEP damper specimens built from commercially available viscoelastic damping devices, and an adjustable friction device. The results show that the proposed procedure is sufficiently accurate for predicting the response of VEP systems without iterative dynamic analysis for preliminary design purposes. A design method based on the Performance Spectra framework is then proposed for systems equipped with passive VEP dampers and is applied to enhance the seismic response of a six‐storey steel moment frame. The numerical simulation results on the damped structure confirm the use of the Performance Spectra as a convenient and accurate platform for the optimization of VEP systems, particularly during the initial design stage. Copyright © 2016 John Wiley & Sons, Ltd.     

Near‐bed shear stress,turbulence production and dissipation in a shallow and narrow tidal channel

Near‐bed, highly resolved velocity profiles were measured in the lower 0.03 m of the water column using acoustic Doppler profiling velocimeters in narrow tidal channels in a salt marsh. The bed shear stress was estimated from the velocity profiles using three methods: the log‐law, Reynolds stress, and shear stress derived from the turbulent kinetic energy (TKE). Bed shear stresses were largest during ebbing tide, while near‐bed velocities were larger during flooding tide. The Reynolds stress and TKE method gave similar results, while the log‐law method resulted in smaller bed shear stress values during ebbing tide. Shear stresses and turbulent kinetic energy followed a similar trend with the largest peaks during ebbing tide. The maximum turbulent kinetic energy was on the order of 1 × 10^{? 2} m²/s². The fluid shear stress during flooding tide was approximately 30% of the fluid shear stress during ebbing tide. The maximum TKE‐derived shear stress was 0.7 N/m² and 2.7 N/m² during flooding and ebbing tide, respectively, and occurred around 0.02 m above the bed. Turbulence dissipation was estimated using the frequency spectrum and structure function methods. Turbulence dissipation estimates from both methods were maximum near the bed (~0.01 m). Both the structure function and the frequency spectrum methods resulted in maximum dissipation estimates on the order of 4 × 10^{? 3} m²/s³. Turbulence production exceeded turbulence dissipation at every phase of the tide, suggesting that advection and vertical diffusion are not negligible. However, turbulence production and dissipation were within a factor of 2 for 77% of the estimates. The turbulence production and dissipation decreased quickly away from the bed, suggesting that measurements higher in the water column cannot be translated directly to turbulence production and dissipation estimates near the bed. Copyright © 2015 John Wiley & Sons, Ltd.     

Species-specific responses of late Miocene Discoaster spp. to enhanced biosilica productivity conditions in the equatorial Pacific and the Mediterranean

Census data of a major Cenozoic calcareous nannofossil genus (Discoaster) have been acquired from Site U1338, located near the Equator in the eastern Pacific Ocean and drilled in 2009 during Integrated Ocean Drilling Program (IODP) Expedition 321. The investigated 147.53 m thick upper Miocene sediment sequence is primarily composed of biogenic carbonate and biogenic silica. Diatom biostratigraphic data were used to develop a revised biomagnetostratigraphic age model, resulting in more variable late Miocene sedimentation rates. Carbonate content variations mainly reflect dilution by biogenic silica production, although intense carbonate dissolution affects a few shorter intervals. Abundance variations of discoasters show no distinct correlation with either carbonate or biosilica contents. The two dominant Discoaster taxa are D. brouweri and D. variabilis, except for a 12 m thick interval where D. bellus outnumbers the sum of all other discoasters by a factor of 4.6. Data presented indicate that first D. hamatus and then D. berggrenii both evolved from D. bellus. Three unusual morphotypes, here referred to as Discoaster A, B and C, increase in relative abundance during episodes of enhanced biosilica production in the upper half of the investigated sequence (Messinian). Strikingly similar morphotypes have been observed previously in Messinian age sediments from the Mediterranean, characterized by alternating deposition of biogenic carbonate and biosilica. This suggests a species-specific response among some of the late Miocene discoasters to broader oceanographic and climatic forcing that promoted episodes of enhanced deposition of biogenic silica.     

Global 60?km simulations with CCAM: evaluation over the tropics

A six-member ensemble of 60?km resolution global atmospheric simulations has been performed for studying future climate scenarios of Pacific island nations. The simulations were performed using the CSIRO Conformal Cubic Atmospheric Model (CCAM), driven by bias-corrected sea surface temperatures (SSTs) provided by six Coupled Model Intercomparison Project phase 3 global climate models (GCMs) from the Intergovernmental Panel on Climate Change Fourth Assessment Report for the period 1971–2100. This paper focuses on results for the representation of the current climate in the tropical region, a region where the “cold tongue” problem is apparent in all host GCMs. The SST bias-correction and the fine horizontal resolution employed in the CCAM simulations produce a significant improvement over the host GCMs in the rainfall patterns for the transient seasons March–April–May and September–October–November, and a moderate improvement for December–January–February and June–July–August. CCAM also simulates improved rainfall patterns over the South Pacific Convergence Zone. The performance of other tropical features, such as El Ni?o Southern Oscillation and the Walker circulation, is also evaluated.     

Triaxial ellipsoid dimensions and rotational poles of seven asteroids from Lick Observatory adaptive optics images, and of Ceres

Seven main belt asteroids, 2 Pallas, 3 Juno, 4 Vesta, 16 Psyche, 87 Sylvia, 324 Bamberga, and 707 Interamnia, were imaged with the adaptive optics system on the 3 m Shane telescope at Lick Observatory in the near infrared, and their triaxial ellipsoid dimensions and rotational poles have been determined with parametric blind deconvolution. In addition, the dimensions and pole for 1 Ceres are derived from resolved images at multiple epochs, even though it is an oblate spheroid.     

鄂尔多斯盆地西南缘岐山地区马家沟组岩相和沉积环境分析

正研究区位于鄂尔多斯盆地西南缘岐山县北,构造上属于鄂尔多斯盆地渭北隆起西段。奥陶系马家沟组发育了一套典型的白云岩储层,是鄂尔多斯盆地主要的天然气勘探目标层。1岩相特征岐山东剖面马家沟组下部岩性以泥晶白云岩为主,次为粘结白云岩。剖面底部主要是见生物扰动构造,偶夹纹层构造,见成分单一的角砾状白云岩岩;中部见弯曲的藻纹层,中上部沉积构造主要     

Structural setting,style and timing of vein-hosted gold mineralization at the Pogo deposit,east central Alaska

Gold-bearing veins within the Liese zone of the Pogo deposit display a two-stage evolutionary history that records temporal variation in kinematics, fluid chemistry and temperature. Several stacked shallow northwest-dipping shear veins are developed at Pogo, and collectively comprise the Liese Zone. Veins consist of: (1) early, narrow biotite-bearing shear veins; (2) white quartz veins with pyrite-arsenopyrite bands, referred to as main stage quartz veins, that have sericite-Fe-Mg carbonate alteration envelopes and which exploit the early shear veins; and (3) extension veins that form as steeper offshoots from the main stage veins. The presence and orientation of oblique fabrics developed in the older biotite-bearing shear veins are indicative of top-to-the-south displacement under ductile to semi-brittle conditions at higher temperatures. In contrast, the orientation of the extension veins and local sigmoidal shapes indicate a component of top-to-the-northwest normal displacement on the main stage veins in their present orientation, and brittle to semi-brittle conditions of formation. Dolomite-sericite alteration surrounding main stage veins may represent late to post-mineral hydrothermal fluid exploitation of vein margins during ongoing normal displacement along vein systems. All types of veining overprint 107–106 Ma, post-metamorphic granitic dykes. Molybdenite in main stage quartz assemblages has returned Re-Os ages of 104.2±1.1 Ma, significantly older than 96 to 91 Ma ⁴⁰Ar/³⁹Ar ages obtained from vein alteration assemblages that may reflect thermal resetting during post-mineral fault related hydrothermal activity, magmatism and/or retrograde cooling of the lithologic sequence. Unlike typical mesothermal shear vein hosted gold systems, Pogo is temporally and tectonically separated from metamorphic deformation events, and has a comparable kinematic and geometric architecture to Cretaceous plutonic gold deposits in the region. We interpret the deposit to have formed during a regional Cretaceous extensional event during multi-stage exploitation of extensional fault surfaces by hydrothermal fluid from a cooling magmatic source.Editorial handling: S.G. Hagemann     

The chemistry of hydrothermal mounds near the Galapagos Rift

Samples dredged from the sediment mounds have a unique chemistry and mineralogy which reveals details of the hydrothermal processes that produce these deposits. The mounds form primarily by deposition of Fe, Mn and Si from hydrothermal fluids which circulate through the basalt crust and the overlying sediments. The Mn, Fe and Si are strongly fractionated in the process; the Fe and Si precipitate within the mounds under slightly reducing conditions as nontronite, while the Mn is deposited as Mn oxyhydroxides at the seawater-sediment interface. The nontronite is exceptionally well crystallized, and contains less than 200 ppm Al. The Mn minerals, todorokite and birnessite, also have exceptional crystallinity and the distribution of trace elements Cu, Ni, Zn, Co, Ca and Ba in these phases agrees with predictions made on the basis of models of their crystal structure. The environment of deposition which produces this suite of minerals — slow percolation of hydrothermal fluids through pelagic sediments — may not be unique to the Galapagos Rift, as the same suite of minerals has been found in similar setting in the Gulf of Aden and on the Mid-Atlantic Ridge.