Coexisting Amphiboles

Chemical analyses for the following amphibole pairs are presented:anthophyllite—tremolite (or actinolite, or hornblende),cummingtonite (or grunerite)–actinolite (or hornblende),cummingtonite (or grunerite)–anthophyllite (or gedrite),and manganoan cummingtonitemagnesioriebeckite. Nineteen analyses of such pairs are quoted from the literature,and thirty-seven additional pairs have been newly analyzed byelectron probe techniques. Quantitative microprobe determinationsof Si, Al, Fe, Mn, Mg, Ca, and Na were made on polished thin-sections,using naturally occurring, analyzed, homogeneous amphibolesas standards. The literature analyses and the electron probeanalyses for metamorphic, two-amphibole assemblages are givenfor amphiboles in physical contact, which show no textural evidenceof one amphibole being a reaction or alteration product of theother. The chemical data for some of the volcanic, two—amphiboleassemblages were obtained from occurrences that probably donot represent equilibrium pairs. The chemical data are used to determine the extent of the miscibilitygaps between the various amphibole series and the fractionationof the major elements between the two amphiboles of a pair.Anthophyllite and members of the cummingtonite-grunerite seriesgenerally have a larger Fe(total)/Mg ratio than the coexistingcalcic amphibole. The maximum CaO, Al₂O₃and Na₂O contents ofcummingtonite in metamorphic cummingtonite—hornblendepairs are 19 and 32, 02 weight per cent, respectively. Themaximum CaO, A1₂O₃, and Na₂O contents of cummingtonite in metamorphiccummingtonite-hornblende pairs are 19, 32, and 02 weightper cent, respectively. Larger CaO and Al₂O₃ values reportedin the literature were found to be too high because of admixtureof actinolite or hornblende in the analyzed separates. Smallamounts of MnO tend to concentrate preferentially in anthophylliteor cummingtonite of anthophyllite-hornblende and cummingtonite-hornblendepairs. Anthophyllite-cummingtonite pairs may show very similarFe(total)/Mg ratios and differ slightly in Al₂O₃ content only.     

Spatial modulation experiments in the underwater acoustic channel

A modulation technique for increasing the reliable data rate achievable by an underwater acoustic communication system is presented and demonstrated. The technique, termed spatial modulation, seeks to control the spatial distribution of signal energy such that the single physical ocean channel supports multiple parallel communication channels. Given a signal energy constraint, a communication architecture with access to parallel channels will have increased capacity and reliability as compared to one with access to a single channel. Results from two experiments demonstrate higher obtainable data rates and power throughput for a system employing spatial modulation than for one that does not. The demonstrated benefits were characterized by an equivalent SNR gain of over 5 dB in the first experiment. In the second experiment, using two element source and receiver arrays with apertures of 0.9 m, a coherently modulated signal was shown to offer nearly 50% greater capacity by using spatial modulation than by using temporal modulation alone.     

Chemical Petrology of Grenville Schists near Fernleigh, Ontario

A suite of mica schists from the staurolite zone was studiedin detail. Phase rule considerations and distribution relationsindicate that chemical equilibrium was attained within the samplevolume. Iron-magnesium ratios of the silicates vary greatly,and correlate with rock ferrous-ferric ratio, as does the oxidemineral mode. Rock oxidation state varies locally, and is probablydependent on the composition of the original sediment. Distribution coefficients for Fe, Mg, and Mn among garnet, biotote,and staurolite show no vaiation attributable to temperature.Partition of Fe and Mg between staurolite and biotite is regular,but non-ideal. The staurolite structure permits only limited(15–35 percent) substitution of Mg for Fe.     

Stabilization procedures in coupled poromechanics problems: A critical assessment

Numerical solutions for problems in coupled poromechanics suffer from spurious pressure oscillations when small time increments are used. This has prompted many researchers to develop methods to overcome these oscillations. In this paper, we present an overview of the methods that in our view are most promising. In particular we investigate several stabilized procedures, namely the fluid pressure Laplacian stabilization (FPL), a stabilization that uses bubble functions to resolve the fine‐scale solution within elements, and a method derived by using finite increment calculus (FIC). On a simple one‐dimensional test problem, we investigate stability of the three methods and show that the approach using bubble functions does not remove oscillations for all time step sizes. On the other hand, the analysis reveals that FIC stabilizes the pressure for all time step sizes, and it leads to a definition of the stabilization parameter in the case of the FPL‐stabilization. Numerical tests in one and two dimensions on 4‐noded bilinear and linear triangular elements confirm the effectiveness of both the FPL‐ and the FIC‐stabilizations schemes for linear and nonlinear problems. Copyright © 2010 John Wiley & Sons, Ltd.     

Modelling Discharge Rates and Ground Settlement Induced by Tunnel Excavation

Interception of aquifers by tunnel excavation results in water inflow and leads to drawdown of the water table which may induce ground settlement. In this work, analytical and numerical models are presented which specifically address these groundwater related processes in tunnel excavation. These developed models are compared and their performance as predictive tools is evaluated. Firstly, the water inflow in deep tunnels is treated. It is shown that introducing a reduction factor accounting for the effect of effective stress on hydrodynamic parameters avoids overestimation. This effect can be considered in numerical models using effective stress-dependent parameters. Then, quantification of ground settlement is addressed by a transient analytical solution. These solutions are then successfully applied to the data obtained during the excavation of the La Praz exploratory tunnel in the Western Alps (France), validating their usefulness as predictive tools.     

Communication over Doppler spread channels. Part I: Channel andreceiver presentation

Scattering functions from several experiments demonstrate that acoustic underwater channels are doubly spread. Receivers used on these channels to date have difficulty with large Doppler spreads. A receiver to perform coherent communication over Doppler spread channels is presented in this first paper of two. The receiver contains a channel tracker and a linear decoder. The tracker operates by means of a modified recursive least squares algorithm which makes use of frequency-domain filters called Doppler lines. The decoder makes use of the channel tracker coefficients in order to perform minimum mean square error decoding. This first paper treats theoretical aspects whereas the second part presents implementation issues and results     

Communication over Doppler spread channels. II. Receivercharacterization and practical results

For pt. I see ibid., vol. 25, no. 1, p. 62-72 (2000). A receiver for coherent communication through underwater communication channels is analyzed. The receiver performance and stability versus delay spread, Doppler spread, and signal-to-noise ratio is quantified. The stability is governed by the ill-conditioning of a correlation matrix estimate and it sets the limit on how many taps should be used for a channel with a given number of degrees of freedom. The receiver is used extensively on both simulated and real data that are Doppler spread, and good performance in these channels is verified     

Oxygen-isotope record of Late-Glacial climatic change in western Ireland

Oxygen-isotope profiles for the Late-Glacial carbonate sediments from Red Bog and adjacent Lough Gur in County Limerick in western Ireland are readily correlated with the classical hiozones delineated on pollen diagrams for the same cores. The estimated summer temperatures of the Bølling/Allerød were as high as those in the early Holocene and are correlated with increasing Milankovitch summer insolation. This warm phase was abruptly terminated in the Younger Dryas cold episode by a depletion of 4% in δ¹⁸O, suggesting a summer atmospheric temperature decrease of about 12°C, comparable to that inferred from fossil beetle data. The Younger Dryas phase is attributed to a major cooling of the sea-surface temperature by a postulated discharge of icebergs similar to that of the Heinrich events, for the icebergs were much more effective than simple meltwater in cooling the sea surface and thus the climate over Europe. Shorter-term cool phases (Older Dryas. Gerzensee. Preboreal oscillation) are also recognized.     

Multi-technique approach to characterise the effects of cryopreservation on larval development of the Pacific oyster (Crassostrea gigas)

Cryopreservation experiments were conducted on D-stage larvae of the Pacific oyster (Crassostrea gigas) to investigate the effects of two cryoprotectant solutions and three cooling rates on larval development from 1 to 22 days post-fertilisation. Cryoprotectant solutions were made up to final concentrations (after 1:1 dilution with larvae) of 10% ethylene glycol, 1% polyvinylpyrrolidone and either 0.2 or 0.4 M trehalose. Three cooling rates (0.5, 1 and 2 °C min^?1 between ?10 and ?35 °C post-holding) were tested in an orthogonal design with the two cryoprotectants. Results indicate that control larvae out-performed all cryopreservation treatments for survival, feeding consumption and shell length parameters. However, larvae exposed to 0.4 M trehalose did considerably better than those exposed to 0.2 M trehalose, regardless of cooling rate conditions. Scanning electron and light microscopy observations were used to assess larval morphology and organogenesis, indicating that treatments with surviving larvae were morphologically and developmentally similar to control larvae.     

Ordinary (mesostasis) and not‐so‐ordinary (symplectites) late‐stage assemblages in howardites

Abstract– Two categories of symplectites have been observed in howardites: three‐phase, composed of vermicular intergrowths of ferroan augite, fayalitic olivine, and silica, and two‐phase, composed of vermicular intergrowths of orthopyroxene and troilite. Three‐phase symplectites have been previously shown to represent the breakdown products of metastable pyroxene. In howardites, they appear to be genetically related to gabbroic eucrites. In some cases and under yet‐to‐be specified conditions, ferroan clinopyroxene in gabbroic eucrites may undergo only localized decomposition resulting in oriented exsolution‐like features. Breakdown phases in those cases are fayalitic olivine, silica, and—depending on the MgO content of the system—orthopyroxene. As opposed to three‐phase symplectites, two‐phase symplectites are most likely of diogenitic origin. They probably formed via impact‐induced localized melting of diogenitic orthopyroxene in the presence of troilite (grain boundary melting). Three‐phase symplectites in howardites occasionally contain accessory amounts of ilmenite, troilite, and/or kamacite and are exclusively associated with medium‐grained FeO‐rich pyroxene, silica, and plagioclase. All minerals involved are late‐stage crystallites or mesostasis phases. In general, highly evolved eucritic lithologies constitute only a minor fraction of howardites. However, considering that three‐phase symplectites are generated in a low‐pressure, i.e., near‐surface, environment, FeO‐ and CaO‐rich eucritic rocks may be exposed locally on Vesta’s surface. This, in turn, is highly relevant to the ongoing DAWN mission.