A systematic algorithm for obtaining SODAR wind profiles

Summary Current methods of obtaining wind profiles from SODARs generally employ ad hoc strategies for Doppler spectrum peak selection, profile smoothing, and consistency checks. This paper addresses the problem of systematically obtaining vertical profiles of wind vectors from a SODAR. A new approach is to regard every spectrum frequency as a possible estimator of the radial wind component, but to weight these Doppler estimates according to the spectral power at each frequency. This allows the peak detection, smoothing, and assimilation of a priori information to be combined into a constrained linear inversion methodology. The inversion process also allows an estimation of signal-to-noise ratio, degrees of freedom, and information content versus height. Examples are given of profiles obtained using this new inverse method. The relationship to the physical limitations of the SODAR instrument and the atmosphere is discussed.     

Composition of Kerogen in Kupferschiefer from Southwest Poland

Thirty-seven Kupferschiefer samples from southwestern Poland were analyzed by microscopy, Rock-Eval approach and instrumental neutron activation analysis to understand the geochemical and morphological characteristics of kerogen present in the samples. The analytical results indicate that there are two different types of kerogens. One type was only subjected to thermal alteration processes, and the other was further oxidized after deposition of the sediment.In the oxidized samples migrabitumen was transformed into pyrobitumen. Rock-Eval analyses show a significant decrease in HI values in the oxidized samples and an increase in OI values in relation to the samples that were not influenced by oxidation. Variations in S2 versus Corg contents indicate a change in kerogen from Type II to Type III with progressing oxidation. The presence of pyrobitumen and the depletion of hydrogen in the altered kerogen allow one to conclude that the kerogen was used as hydrogen donor for thermochemical sulfate reduction(TSR).     

Simulation of oasis breeze circulation in the arid region of the Northwestern China

In this paper, the process of oasis-desert circulation (ODC) is simulated by MM5V3.5 model through designing an ideal oasis-desert scheme and assuming that initial atmosphere is at rest (V = 0). The findings showed that the key of forming special oasis boundary structure is the difference of energy and water between oasis and desert. The evaporation of oasis surface consumes heat energy, and the low temperature of oasis causes an oasis breeze circulation (OBC), which drives an ODC with a downdraft over the oasis and an updraft over the desert. Later, the cold, dry and stable boundary over oasis is gradually formed, on the contrary,the atmospheric boundary over desert on the edge of oasis is hot, humid and unstable and its height is about 600 hPa. The updraft over the desert forms a wet ring that acts as a vertical wall weakening the low-level moisture exchange between the oasis and desert. The downdraft of OBC increases the atmospheric stability that reduces the oasis evaporation. The low-level outflow from the oasis (into the desert) prevents the dry, hot air flowing from the desert into the oasis.Thus an oasis self-preservation mechanism may be formed due to OBC. The horizontal area influenced by oasis is twice as oasis area and the vertical range is four times as oasis. The ODC is strong in the daytime and reaches the strongest at 17:00, and the influenced area is the largest at 20:00.     

Ambiguous Moment Tensors and Radiation Patterns in Anisotropic Media with Applications to the Modeling of Earthquake Mechanisms in W-Bohemia

Anisotropic material properties are usually neglected during inversions for source parameters of earthquakes. In general anisotropic media, however, moment tensors for pure-shear sources can exhibit significant non-double-couple components. Such effects may be erroneously interpreted as an indication for volumetric changes at the source. Here we investigate effects of anisotropy on seismic moment tensors and radiation patterns for pure-shear and tensile-type sources. Anisotropy can significantly influence the interpretation of the source mechanisms. For example, the orientation of the slip within the fault plane may affect the total seismic moment. Also, moment tensors due to pure-shear and tensile faulting can have similar characteristics depending on the orientation of the elastic tensor. Furthermore, the tensile nature of an earthquake can be obscured by near-source anisotropic properties. As an application, we consider effects of inhomogeneous anisotropic properties on the seismic moment tensor and the radiation patterns of a selected type of micro-earthquakes observed in W-Bohemia. The combined effects of near-source and along-path anisotropy cause characteristic amplitude distortions of the P, S1 and S2 waves. However, the modeling suggests that neither homogeneous nor inhomogeneous anisotropic properties alone can explain the observed large non-double-couple components.The results also indicate that a correct analysis of the source mechanism, in principle, is achievable by application of anisotropic moment tensor inversion.     

The impact of hydrological changes on travertine deposits related to thermal springs in the Pamukkale area (SW Turkey)

Pamukkale thermal waters (35 °C), exhibiting calcium-bicarbonate-sulfate composition and high carbon dioxide concentration, are of a predominantly meteoric origin. The meteoric fluid, circulating through faults and fractures, is heated by magmatic intrusions at great depth, and ascends from deep reservoirs to the surface. Mixing with relatively cold groundwater in the near surface zone promotes different saturation conditions with respect to calcium carbonate that later precipitates at depth and/or the surface. Dissolution-deposition processes of calcium carbonate both at surface and depth environments may help to reconstruct past climate direction in the field. During wet climate conditions a high-rate of calcium carbonate accumulation would be expected to occur at the surface because thermal fluid would be under-saturated with respect to calcium carbonate at depth because of a relatively higher mixing ratio with cold groundwater. During dry climate conditions the thermal fluid would be super-saturated at depth because of the highly acidic environment. Hydrometeorological studies reveal that the annual precipitation at the Pamukkale hydrothermal field tends to decrease with time. This climatic change in the area was also detected from geological records. While humid climate conditions prevailed during the late Quaternary, the area has recently been affected by arid/semi-arid climate conditions, followed by some episodic transitions. This study has shown how the system has possibly reacted to different climate conditions since antiquity.     

Influences of wastewater discharges on the water quality of Mamasın dam watershed in Aksaray, Central Anatolian part of Turkey

Sustaining the human ecological benefits of surface water requires carefully planned strategies for reducing the cumulative risks posed by diverse human activities. Municipal governments in Aksaray City play a key role in developing solutions to surface water management and protection problems. The responsibility to provide drinking water and sewage works, regulate the use of private land, and protect public health provides the mandate and authority to take action. A large part of Aksaray City uses Mamasın dam water as its primary source for drinking water. Several point sources of contamination may result from direct wastewater discharges from Melendiz and Karasu rivers, which recharge the Mamasın dam watershed. Relevant studies were carried out for monitoring the eutrophication process, which usually occurs in the static water mass of the Mamasın dam lake. This process may be caused by the continual increase in nutrients and decrease of O₂ levels, causing anaerobic conditions. Stimulated algae growth in these water bodies consequently reduces water quality. Hydrochemical parameters were evaluated to estimate the types of pollution sources, the level of pollution, and its environmental impacts on the Mamasın dam drinking water reservoir.     

Polymorphic phase transition in Superhydrous Phase B

We synthesized superhydrous phase B (shy-B) at 22 GPa and two different temperatures: 1200°C (LT) and 1400°C (HT) using a multi-anvil apparatus. The samples were investigated by transmission electron microscopy (TEM), single crystal X-ray diffraction, Raman and IR spectroscopy. The IR spectra were collected on polycrystalline thin-films and single crystals using synchrotron radiation, as well as a conventional IR source at ambient conditions and in situ at various pressures (up to 15 GPa) and temperatures (down to −180°C). Our studies show that shy-B exists in two polymorphic forms. As expected from crystal chemistry, the LT polymorph crystallizes in a lower symmetry space group (Pnn2), whereas the HT polymorph assumes a higher symmetry space group (Pnnm). TEM shows that both modifications consist of nearly perfect crystals with almost no lattice defects or inclusions of additional phases. IR spectra taken on polycrystalline thin films exhibit just one symmetric OH band and 29 lattice modes for the HT polymorph in contrast to two intense but asymmetric OH stretching bands and at least 48 lattice modes for the LT sample. The IR spectra differ not only in the number of bands, but also in the response of the bands to changes in pressure. The pressure derivatives for the IR bands are higher for the HT polymorph indicating that the high symmetry form is more compressible than the low symmetry form. Polarized, low-temperature single-crystal IR spectra indicate that in the LT-polymorph extensive ordering occurs not only at the Mg sites but also at the hydrogen sites.