The effects of metamorphism on O and Fe isotope compositions in the Biwabik Iron Formation, northern Minnesota

The Biwabik Iron Formation of Minnesota (1.9 Ga) underwent contact metamorphism by intrusion of the Duluth Complex (1.1 Ga). Apparent quartz–magnetite oxygen isotope temperatures decrease from ∼700°C at the contact to ∼375°C at 2.6 km distance (normal to the contact in 3D). Metamorphic pigeonite at the contact, however, indicates that peak temperatures were greater than 825°C. The apparent O isotope temperatures, therefore, reflect cooling, and not peak metamorphic conditions. Magnetite was reset in δ¹⁸O as a function of grain size, indicating that isotopic exchange was controlled by diffusion of oxygen in magnetite for samples from above the grunerite isograd. Apparent quartz–magnetite O isotope temperatures are similar to calculated closure temperatures for oxygen diffusion in magnetite at a cooling rate of ∼5.6°C/kyr, which suggests that the Biwabik Iron Formation cooled from ∼825 to 400°C in ∼75 kyr at the contact with the Duluth Complex. Isotopic exchange during metamorphism also occurred for Fe, where magnetite–Fe silicate fractionations decrease with increasing metamorphic grade. Correlations between quartz–magnetite O isotope fractionations and magnetite–iron silicate Fe isotope fractionations suggest that both reflect cooling, where the closure temperature for Fe was higher than for O. The net effect of metamorphism on δ¹⁸O–δ⁵⁶Fe variations in magnetite is a strong increase in δ¹⁸O_Mt and a mild decrease in δ⁵⁶Fe with increasing metamorphic grade, relative to the isotopic compositions that are expected at the low temperatures of initial magnetite formation. If metamorphism of Iron Formations occurs in a closed system, bulk O and Fe isotope compositions may be preserved, although re-equilibration among the minerals may occur for both O and Fe isotopes. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Application of precise 142Nd/144Nd analysis of small samples to inclusions in diamonds (Finsch,South Africa) and Hadean Zircons (Jack Hills,Western Australia)

¹⁴⁶Sm–¹⁴²Nd and ¹⁴⁷Sm–¹⁴³Nd systematics were investigated in garnet inclusions in diamonds from Finsch (S. Africa) and Hadean zircons from Jack Hills (W. Australia) to assess the potential of these systems as recorders of early Earth evolution. The study of Finsch inclusions was conducted on a composite sample of 50 peridotitic pyropes with a Nd model age of 3.3 Ga. Analysis of the Jack Hills zircons was performed on 790 grains with ion microprobe ²⁰⁷Pb/²⁰⁶Pb spot ages from 3.95 to 4.19 Ga. Finsch pyropes yield 100 × ?¹⁴²Nd = ? 6 ± 12 ppm, ?¹⁴³Nd = ? 32.5, and ¹⁴⁷Sm/¹⁴⁴Nd = 0.1150. These results do not confirm previous claims for a 30 ppm ¹⁴²Nd excess in South African cratonic mantle. The lack of a ¹⁴²Nd anomaly in these inclusions suggests that isotopic heterogeneities created by early mantle differentiation were remixed at a very fine scale prior to isolation of the South African lithosphere. Alternatively, this result may indicate that only a fraction of the mantle experienced depletion during the first 400 Myr of its history. Analysis of the Jack Hills zircon composite yielded 100 × ?¹⁴²Nd = 8 ± 10 ppm, ?¹⁴³Nd = 45 ± 1, and ¹⁴⁷Sm/¹⁴⁴Nd = 0.5891. Back-calculation of this present-day ?¹⁴³Nd yields an unrealistic estimate for the initial ?¹⁴³Nd of ? 160 ?-units, clearly indicating post-crystallization disturbance of the ¹⁴⁷Sm–¹⁴³Nd system. Examination of ^146,147Sm–^142,143Nd data reveals that the Nd budget of the Jack Hills sample is dominated by non-radiogenic Nd, possibly contained in recrystallized zircon rims or secondary subsurface minerals. This secondary material is characterized by highly discordant U–Pb ages. Although the mass fraction of altered zircon is unlikely to exceed 5–10% of total sample, its high LREE content precludes a reliable evaluation of ¹⁴⁶Sm–¹⁴²Nd systematics in Jack Hills zircons.     

Geomorphological hazards related to deep dissolution phenomena in the Western Italian Alps: Distribution, assessment and interaction with human activities

Deep dissolution affects great part of soluble rocks (e.g. gypsum and anhydrite) of the Western Italian Alps. The related superficial phenomena (sinkholes, gravity-induced processes and a local worsening of geomechanical rock properties) are not limited to typical karsts landscape and cause slope instability also affecting populated sites and infrastructures. The paper aims to describe general characteristic of dissolution phenomena, to interpret their conditioning factors and evolutionary stages and to assess possible hazards due to their superficial effects.The search for evidences of deep dissolution leads to the selection of representative sites in the central part of the Western Italian Alps (Piemonte and Valle d'Aosta Region). Detailed geological and geomorphological studies have been used to classify the selected sites by type, size and variable state of activity. Very different evolutionary stages of dissolution phenomena have been interpreted by comparison of case-studies: some are early “embryonic”; others are more evolved, up to typical sinkholes, or even remodelled by other phenomena. Some cases show an extreme complexity in the interactions between corrosion phenomena and other geomorphic processes: slope deformations, from one side, and karst, fluvial and glacial phenomena, to the other. A wide range of movement rates on slope instabilities induced by deep dissolution have been estimated by topographic and geomorphic data. Geochemical data on removed rocks by dissolution indicate 0.4 mm/year values for local subsidence. Historical and technical data indicate low frequency of major dissolution-induced collapses, but highlight widespread damages to tunnels, roads and buildings, especially along slopes.     

Kinetics of Cd sorption, desorption and fixation by calcite: A long-term radiotracer study

Time-dependent sorption and desorption of Cd on calcite was studied over 210 days utilizing ¹⁰⁹Cd as a tracer to distinguish between ‘labile’ and ‘non-labile’ forms of sorbed Cd. Stabilizing the calcite suspensions for 12 months under atmospheric P_CO2 and controlled temperature was necessary to reliably follow Cd dynamics following initial sorption. Results revealed time-dependant Cd sorption and marked desorption hysteresis by calcite under environmentally relevant conditions. Data obtained were fitted to a first-order kinetic model and a concentric shell diffusion model. Both models described the progressive transfer of Cd²⁺ to a less reactive form within calcite and subsequent desorption of Cd subject to different initial contact times. The kinetic model provided a better fit to the combined sorption and desorption data (R² = 0.992). It differentiates between two ‘pools’ of sorbed Cd²⁺ on calcite, ‘labile’ and ‘non-labile’, in which labile sorbed Cd is in immediate equilibrium with the free Cd²⁺ ion activity in solution whereas non-labile Cd is kinetically restricted. For the diffusion model (R² = 0.959), the rate constants describing Cd dynamics in calcite produced a half-life for Cd desorption of ∼175 d, for release to a ‘zero-sink’ solution. Results from this study allow comment on the likely mechanisms occurring at the calcite surface following long-term Cd sorption.     

Atomistic simulation of the mechanisms of noble gas incorporation in minerals

Atomistic simulations have been carried out to investigate the mechanisms of noble gas incorporation in minerals using both the traditional two-region approach and the “supercell” method. The traditional two-region approach has been used to calculate defect energies for Ne, Ar, Kr and Xe incorporation in MgO, CaO, diopside and forsterite in the static limit and at one atmosphere pressure. The possibilities of noble gas incorporation via both substitution and interstitial mechanisms are studied. The favored mechanism varies from mineral to mineral and from noble gas to noble gas. In all minerals studied, the variation of the solution energies of noble gas substitution with atomic radius appears approximately parabolic, analogous to those for 1⁺, 2⁺, 3⁺ and 4⁺ trace element incorporation on crystal lattice sites. Noble gas solution energies thus also fall on a curve, similar to those previously observed for cations with different charges, but with much lower curvature.The “supercell” method has been used to investigate the pressure dependence of noble gas incorporation in the same systems. Results indicate a large variation of the solubility of the larger noble gases, Kr and Xe with pressure. In addition, explicit simulation of incorporation at the (0 0 1) surface of MgO shows that the solubility of the heavier noble gases may be considerably enhanced by the presence of interfaces.     

Iron isotope fractionation in subterranean estuaries

Dissolved Fe concentrations in subterranean estuaries, like their river-seawater counterparts, are strongly controlled by non-conservative behavior during mixing of groundwater and seawater in coastal aquifers. Previous studies at a subterranean estuary of Waquoit Bay on Cape Cod, USA demonstrate extensive precipitation of groundwater-borne dissolved ferrous iron and subsequent accumulation of iron oxides onto subsurface sands. Waquoit Bay is thus an excellent natural laboratory to assess the mechanisms of Fe-isotope fractionation in redox-stratified environments and determine potential Fe-isotope signatures of groundwater sources to coastal seawater. Here, we report Fe isotope compositions of iron-coated sands and porewaters beneath the intertidal zone of Waquoit Bay. The distribution of pore water Fe shows two distinct sources of Fe: one residing in the upward rising plume of Fe-rich groundwater and the second in the salt-wedge zone of pore water. The groundwater source has high Fe(II) concentration consistent with anoxic conditions and yield δ⁵⁶Fe values between 0.3 and −1.3‰. In contrast, sediment porewaters occurring in the mixing zone of the subterranean estuary have very low δ⁵⁶Fe values down to −5‰. These low δ⁵⁶Fe values reflect Fe-redox cycling and result from the preferential retention of heavy Fe-isotopes onto newly formed Fe-oxyhydroxides. Analysis of Fe-oxides precipitated onto subsurface sands in two cores from the subterranean estuary revealed strong δ⁵⁶Fe and Fe concentration gradients over less than 2m, yielding an overall range of δ⁵⁶Fe values between −2 and 1.5‰. The relationship between Fe concentration and δ⁵⁶Fe of Fe-rich sands can be modeled by the progressive precipitation of Fe-oxides along fluid flow through the subterranean estuary. These results demonstrate that large-scale Fe isotope fractionation (up to 5‰) can occur in subterranean estuaries, which could lead to coastal seawater characterized by very low δ⁵⁶Fe values relative to river values.     

The Fe-C system at 5 GPa and implications for Earth’s core

Earth’s core may contain C, and it has been suggested that C in the core could stabilize the formation of a solid inner core composed of Fe₃C. We experimentally examined the Fe-C system at a pressure of 5 GPa and determined the Fe-C phase diagram at this pressure. In addition, we measured solid metal/liquid metal partition coefficients for 17 trace elements and examined the partitioning behavior between Fe₃C and liquid metal for 14 trace elements. Solid metal/liquid metal partition coefficients are similar to those found in one atmosphere studies, indicating that the effect of pressure to 5 GPa is negligible. All measured Fe₃C/liquid metal partition coefficients investigated are less than one, such that all trace elements prefer the C-rich liquid to Fe₃C. Fe₃C/liquid metal partition coefficients tend to decrease with decreasing atomic radii within a given period. Of particular interest, our 5 GPa Fe-C phase diagram does not show any evidence that the Fe-Fe₃C eutectic composition shifts to lower C contents with increasing pressure, which is central to the previous reasoning that the inner core may be composed of Fe₃C.     

Limitations of the ferrozine method for quantitative assay of mineral systems for ferrous and total iron

The quantitative assay of clay minerals, soils, and sediments for Fe(II) and total Fe is fundamental to understanding biogeochemical cycles occurring therein. The commonly used ferrozine method was originally designed to assay extracted forms of Fe(II) from non-silicate aqueous systems. It is becoming, however, increasingly the method of choice to report the total reduced state of Fe in soils and sediments. Because Fe in soils and sediments commonly exists in the structural framework of silicates, extraction by HCl, as used in the ferrozine method, fails to dissolve all of the Fe. The phenanthroline (phen) method, on the other hand, was designed to assay silicate minerals for Fe(II) and total Fe and has been proven to be highly reliable. In the present study potential sources of error in the ferrozine method were evaluated by comparing its results to those obtained by the phen method. Both methods were used to analyze clay mineral and soil samples for Fe(II) and total Fe. Results revealed that the conventional ferrozine method under reports total Fe in samples containing Fe in silicates and gives erratic results for Fe(II). The sources of error in the ferrozine method are: (1) HCl fails to dissolve silicates and (2) if the analyte solution contains Fe³⁺, the analysis for Fe²⁺ will be photosensitive, and reported Fe(II) values will likely be greater than the actual amount in solution. Another difficulty with the ferrozine method is that it is tedious and much more labor intensive than the phen method. For these reasons, the phen method is preferred and recommended. Its procedure is simpler, takes less time, and avoids the errors found in the ferrozine method.     

Thermodynamic model for arsenic speciation in sulfidic waters: A novel use of ab initio computations

Recent discoveries demonstrate that the chemistry of arsenic in sulfidic waters is much more complex that previously believed. One implication is that all earlier thermodynamic data on stabilities of As thioanions require revision. Previously used experimental approaches for determining As thioanion stabilities may be inadequate to deal with the full range of complexity. Here we use computational as well as empirical information to construct a provisional model for equilibrium As thioanion distributions in sulfidic waters. Whereas previous authors have argued for either As(III) or As(V) thioanions, the new model predicts that both are important and can occur simultaneously under commonly encountered pH and ΣS^−II conditions. At the order of magnitude level, the model reasonably predicts the solubility of As₂S₃ in sulfidic solutions, provides tentative peak assignments for published Raman spectroscopic data and plausibly accounts for how sulfide modifies the bacterial toxicity of As. The model yields a thermodynamic justification for how sulfide, which is usually regarded as a reducing agent, can counter-intuitively drive oxidation of As(III) to As(V), as has been observed both in the laboratory and in the field. Despite its uncertain accuracy, the model serves as a useful source of new, testable hypotheses about As geochemistry and highlights crucial experimental data needs.     

Models in geography revisited

Agent based models (ABMs) have many applications, and illustrate a rapidly developing field of enquiry, spanning both the physical-mathematical and human-social sciences. ABMs are seen as most appropriate in situations where decisions or actions are distributed around particular locations, and in which structure is viewed as emergent from the interaction between individuals. ABMs may be used either as representational devices, to reproduce the patterns observed or desired in the system of interest, or as foundational tools contributing to the development of social or economic theory. The role and status of models and modelling is itself an instantiation of a wider debate concerning representation and explanation. Today, a case can be made that the nature of explanation and the use of scientific interpretation reflect much less definite and exclusive positions and permit more diverse approaches than hitherto. The underlying proposition of this commentary is, therefore, that the time is right for a positive application of ABMs within the discipline of geography, and for a rediscovery and reappraisal of the richness and depth of insight in the model-building enterprise more generally. First, the context for ABM development and application is set with reference to the agency-structure debate. Second, some aspects of the heritage of models in geography is presented, based upon reviews of two benchmark publications bearing that title. Next, some of the most significant characteristics, uses, potentials and limitations of ABMs, are reviewed. Finally, some constructive ways forward are suggested, as informed by theory and method from the interpretative social sciences.