Petroleum hydrocarbons in sediments of Southampton water estuary

The sediments of Southampton Water were analysed for petroleum hydrocarbons to determine the fate of petrochemical refinery waste in the estuary. Much of the petroleum hydrocarbons appears to be removed by adsorption onto estuarine sediments close to source. Surface sediment concentrations range from 3·1mg/g dry weight near a refinery to 0·5 mg/g dry weight at locations distant from the refinery.The absence of any change with depth in total hydrocarbon concentrations from some sediment cores and the presence of distinct ‘oil’ horizons in others suggests that mixing of sediments in the area is very random. Sedimentation rates in areas where a distinct oil horizon was observed ranged from 1 to 3cm a year.     

Nocdap results: On the relationship of extreme waves and currents for design of offshore structures

Simultaneous wind, wave, and current data during 21 storms spanning four winters at Tromsøflaket (230 m depth) were analysed to determine joint probabilities of occurrence. Waves were measured with a Waverider Buoy, winds with a recording anemometer onboard a vessel and currents at up to five depths with Aandera RCM-4 current meters. Measured currents were filtered to separate tidal currents from residual currents. In most of the statistical analyses, the actual current profiles were replaced with a simplified “equivalent” profile (constant above 50 m depth) whose magnitude was chosen to give the same drag load on a single pile as the actual profile when both profiles were combined with wave orbital velocities. The data suggest that the equivalent current is weakly correlated with the wave height. Within the range of the data analysed, an in-line equivalent residual current of 30 cm sec⁻¹ is adequate for design drag force calculations.The data presented here are used to illustrate a procedure for data analysis and are not suitable for use as design criteria.     

Improved in situ gamma-ray transmission densitometer for marine sediments

The first-generation University of Illinois gamma-ray transmission densitometer, designed for the in situ measurement of sediment bulk density, was modified by incorporating in the detector probe (1) an Americium-241 alpha particle pulser and an anti-walk gain stabilization control to maintain better temperature stability and (2) a small power supply and a IC preamplifier to eliminate the need for a high-voltage coaxial cable between the detector and external signal conditioning electronics package. This second-generation Lehigh University system has been successfully deployed since 1971 in routine use from ships and submersibles in the Atlantic and Pacific Oceans and the Gulf of Mexico. Results are presented of system operations to (1) measure bulk density over the range of 1.2–1.8 Mg/m³ in the Hudson Canyon, (2) penetrate 1.9 m into the seafloor in the San Diego trough and, (3) be lowered to a water depth of 3.6 km in the Gulf of Mexico.     

Transverse vibrations of a rectangular cantilever plate with thickness varying in a discontinuous fashion

A numerical solution is obtained for the title problem by means of the popular finite element method. An experimental investigation of the problem is also presented for plates of square planform. The agreement between theoretical and experimental values is very good in the case of the fundamental frequency, and reasonably good when the second and third normal modes of transverse vibration are considered. It is concluded that beneficial effects are obtained in the sense that one generates a lighter structural element with higher fundamental frequency of transverse vibration. Hence, dynamic stiffening is achieved.     

The thermohaline fields and currents measured in the sub-arctic frontal zone of the Pacific Ocean

Based on the MEGAPOLYGON data, it is shown that the large-scale elements of the thermohaline structure and the fields of currents in the baroclinic layer (down to 1200 m) are well coordinated. The circulation has a two-layer structure with a transitory layer at a depth of 1200 m. The topography of the isopycnic surface of the layer's core is formed under the influence of small-scale and mesoscale processes which realize the trans-frontal exchange.Translated by Mikhail M. Trufanov.     

Experimental investigation of the combustive sound source

In this paper, we describe a unique low frequency underwater sound source called the combustive sound source (CSS). In this device, a combustible gas mixture is captured in a combustion chamber and ignited with a spark. The ensuing combustion produces expanding gases which in turn produce high intensity, low frequency acoustic pulses. With high-speed motion pictures of the CSS event, we relate the motion of the bubble to the acoustic waveform. We also compare the measured first bubble period in the CSS pressure signature with the predictions of the Rayleigh-Willis equation, including the dependence of the radiated acoustic waveform on the volume and depth of the bubble. Measurements of the first bubble period agree with Rayleigh-Willis theory in trend, but not in absolute value. In addition, we discuss the variation of the acoustic output with the fuel/oxygen mixture. Finally, several other factors that affect the acoustic output of CSS are discussed. These include the shape of the CSS combustion chamber, the type of oxidizer and fuel, and the ignition source     

The environmental management of shipping

The environmental management of shipping requires systematic consideration of the geography of shipping routes, ship types and cargoes, and environments which can form the basis of a classificatory approach to Environmental Impact Assessment (EIA). Beyond this, effective environmental management depends in the first instance upon sound information management including monitoring of the environment, surveillance of shipping and information technology, followed by information assessment including, in particular, risk and environmental impact. The general management dimension includes co-ordination of technical management and organisational aspects related to shipping. It is suggested that effective environmental management of shipping may depend upon a regionalisation of the marine environment for EIA purposes akin to that found in the loadline rules, together with rationalisation of the increasing number of special areas in existence or proposed for this purpose. EIA will have to become an integral part of the overall management system in the shipping industry.