Fischer图解及其在旋回层序研究中的应用──以北京西山张夏组为例

Ｆｉｓｃｈｅｒ图解（又称为容纳空间图解）为人们研究沉积旋回在空间上的叠置规律、相对海平面变化、层序级次的划分以及地层层序对比等提供了一种客观实用的方法。本文较详细地讨论了该图解的绘制方法及应注意的问题。运用该图解，将北京西山下苇甸剖面张夏组划分为１个大的三级旋回层序和４个四级旋回层序，根据图解反映的相对海平面变化讨论了旋回层序与构造运动间的关系，提出华北板块晚寒武世之前的＂翘翘板运动＂应始于中寒武世张夏期之早期到中期。     

Geochronology and sedimentology of the lower Passaic River,New Jersey

In an attempt to characterize localized rates of sediment accretion, 10 sediment cores were collected from the lower reach of the Passaic River, a major tributary of Newark Bay, New Jersey. Sediments were assayed for ²¹⁰Pb activity at predetermined depths and the rate of sediment accretion (cm yr^?1) was estimated from the least squares regression of the log of unsupported activity versus depth. Sediment accretion rates, derived from ²¹⁰Pb measurements (R_Pb) were used to predict the depth interval within the core containing sediments deposited around 1954; subsequent ¹³⁷Cs analyses were focused on this depth interval. Sediment accretion rates derived from ¹³⁷Cs measurements (R_Cs) were extrapolated from the depth of the 1954 horizon. Lead-210 derived sediment accretion rates in cores collected from a sediment bench extending along the inside bend on the southern shore of a meander in the river, ranged from 4.1 cm yr^?1 to 10.2 cm yr^?1 and averaged 6.8 cm yr^?1. The R_Cs estimates for cores from this area ranged from 3.8 cm yr^?1 to 8.9 cm yr^?1 and averaged 6.6 cm yr^?1. The R_Cs for cores collected in a more hydrologically dynamic reach of the river upstream of the sediment bench, were only 0.41 cm yr^?1 and 0.66 cm yr^?1. The results of this investigation indicate that this reach of the lower Passaic River is an area of high sediment accumulation, retaining much of the sediment load deposited from upstream and downstream sources. The rates of sediment accretion in the lower Passaic River are among the highest reported anywhere in the Newark Bay estuary.     

德兴推覆构造地质特征及与成矿关系

德兴推覆构造是德兴斑岩铜矿和金山金矿的控岩控矿构造。论述了德兴推覆构造的地质特征及控矿意义。建立了以韧性剪切为特征的推覆构造控制金矿和斑岩铜矿的多因复成成矿模式。     

塘古坳陷构造—沉积演化及其油气勘探方向

塔里木盆地塘古坳陷历经20余年勘探而成效甚微,在新的地震与钻井资料基础上,通过地层沉积对比、构造解析重新认识塘古坳陷的形成与演化,及其对勘探方向的指示研究,结果表明：1）塘古地区存在基底古隆起,寒武系自塔中向南逐渐减薄;2）本区钻揭中-下奥陶统碳酸盐岩地层连续,不存在寒武系—中奥陶统的台槽;3）上奥陶统良里塔格组沉积期在东西两侧发育巨厚的台地边缘相带,而坳陷区相变为盆地泥岩相;4）北东向冲断构造具有分层变形特点,断裂活动始于晚奥陶世早期,冲断推覆作用主要形成于奥陶纪末。结果揭示塘古坳陷经历4期构造关键演化期：1）寒武—中奥陶世与塔中连为一体的碳酸盐岩台地发育期;2）上奥陶统良里塔格组沉积期受控东南板缘俯冲与碰撞作用的台盆形成期;3）奥陶纪末强烈沉降的挤压挠曲盆地定型期;4）志留纪—泥盆纪的构造改造期。该结果为盆地构造古地理研究与深层油气评价提供了基础,并提出了勘探新方向。     

广东省海岸表层沉积物的重矿物特征及其与沉积环境的关系

广东省海岸表层沉积物中的重矿物近40种。含量较高的有钛铁矿、赤矿铁、磁铁矿、话石、电气石、黑云母和普通角闪石等。自生矿物主要为硬石膏、自然铜、黄铁矿及菱铁矿。这些矿物来自附近的母岩。根据物源性质不同,可将不同岸段重矿物区分为陆源矿物组合、近源-自生矿物组合和近源矿物组合三种:除物源控制外,重矿物含量、种类、形态特征及其在平面上的分布主要受沉积环境影响。据此,可将重矿物分布类型划分为河口型、海湾型和海岛型三类,且与上述不同矿物组合性质相对应。     

地质样品中微量金银的在线分离富集方法

提出用ＶＳ－Ⅱ型强碱性阴离子交换纤维定量富集、硫脲解脱，流动注射在线分离富集—火焰原子吸收光谱法测定地质样品中痕量金银的分析方法。该方法检出限低，金为１．４μｇ／ｍＬ，银为０．３５μｇ／ｍＬ，相对标准偏差均小于２％，采样频率为１２０次／ｈ，用于地质样品中痕量金银的直接测定，结果令人满意。     

河套灌区西部浅层地下水咸化机制

浅层地下水水位埋深浅、含盐量高,是导致河套灌区土壤次生盐渍化的重要原因.以河套灌区西部地区为研究区,通过对浅层地下水的水化学和氢氧同位素特征分析以及水文地球化学模拟,探讨了灌区浅层地下水的补给来源和主控水-岩作用过程,并定量估算了蒸发作用对浅层地下水含盐量的影响.研究区内浅层地下水为弱碱性咸水,pH为7.23～8.45...     

辽西义县组与冀北大店子组、西瓜园组的对比

辽西义县组与冀北大店子组、西瓜园组的对比关系一直存有分歧.综合分析前人生物地层学资料,并结合同位素年代学,提出老公沟层、业南沟层、尖山沟层和冀北滦平盆地大店子组1~2段及3~4段下部相当,大康堡层可与大店子组3~4段上部对比,金刚山层与西瓜园组大致相当.     

西藏尼木变质岩特征及变质温压条件

出露于雅鲁藏布江缝合带北侧尼木县的变质岩主要由石榴黑云片麻岩和黑云斜长角闪角岩组成.研究表明岩石变质程度达到角闪角岩相-辉石角岩相;石榴子石变斑晶具有生长环带,角闪石均为钙质角闪石,黑云母大多为铁质黑云母和铁叶云母,长石多为更长石和中长石,少量为正长石.利用石榴子石-黑云母温度计、石榴子石-黑云母-斜长石-石英压力计和角闪石-斜长石温度及压力计计算获得石榴黑云片麻岩和黑云斜长角闪角岩的变质温度分别为619 ～661℃,695 ～ 702℃,压力范围分别为1.86～1.94kbar和3.69～4.56kbar.野外和室内研究认为岩石原岩为冈底斯带南缘叶巴组火山岩及其上部沉积岩,岩石经历了高温低压的接触变质作用.结合已有冈底斯带陆缘岩浆活动特征,对变质岩的形成环境和过程进行了反演.     

Comparison of Two Methods Used to Model Shape Parameters of Pareto Distributions

Two methods are compared for estimating the shape parameters of Pareto field-size (or pool-size) distributions for petroleum resource assessment. Both methods assume mature exploration in which most of the larger fields have been discovered. Both methods use the sizes of larger discovered fields to estimate the numbers and sizes of smaller fields: (1) the tail-truncated method uses a plot of field size versus size rank, and (2) the log–geometric method uses data binned in field-size classes and the ratios of adjacent bin counts. Simulation experiments were conducted using discovered oil and gas pool-size distributions from four petroleum systems in Alberta, Canada and using Pareto distributions generated by Monte Carlo simulation. The estimates of the shape parameters of the Pareto distributions, calculated by both the tail-truncated and log–geometric methods, generally stabilize where discovered pool numbers are greater than 100. However, with fewer than 100 discoveries, these estimates can vary greatly with each new discovery. The estimated shape parameters of the tail-truncated method are more stable and larger than those of the log–geometric method where the number of discovered pools is more than 100. Both methods, however, tend to underestimate the shape parameter. Monte Carlo simulation was also used to create sequences of discovered pool sizes by sampling from a Pareto distribution with a discovery process model using a defined exploration efficiency (in order to show how biased the sampling was in favor of larger fields being discovered first). A higher (more biased) exploration efficiency gives better estimates of the Pareto shape parameters.