Base shear capping buildings with graphite‐lubricated bases for collapse prevention in extreme earthquakes

Damage or collapse of buildings vulnerable to seismic forces may cause human casualties, and seismic upgrading of such structures is a practical solution to this deficiency. The study presented here proposes a simple approach to prevent structural collapse by separating the superstructure from its foundation to let the superstructure slide during extreme ground shaking. The sliding mechanism contributes to cap the horizontal force exerted on the superstructure. In such approach, the key is to maintain the friction force between the superstructure and the foundation sufficiently low and stable. This research proposes to realize a controlled sliding mechanism, which acts as a structural fuse, by means of carbon powder lubrication at the bases of the structure's columns. The fundamental behaviour of the proposed structural system, named the base shear capping building, is investigated by shaking table tests and numerical simulation. Both experimental and numerical results showed that graphite lubrication is an efficient and robust lubrication material, maintaining the friction coefficient between the steel column bases and mortar foundation at around 0.16. The sliding at the bases significantly reduced the acceleration transmitted to the superstructure, keeping the base shear coefficient not greater than about 0.40. Copyright © 2016 John Wiley & Sons, Ltd.     

The 1996 subaqueous eruption at Academii Nauk volcano (Kamchatka) and its effects on Karymsky lake

A subaqueous eruption in Karymsky lake in the Academii Nauk caldera dramatically changed its water column structure, water chemistry and biological system in less than 24 h, sending major floodwaves down the discharging river and eruption plumes with ash and gases high into the atmosphere. Prior to the eruption, the lake had a pH of about 7, was dominated by bicarbonate, and well stocked with fish, but turned in early 1996 into a stratified, initially steaming waterbody, dominated by sulfate with high Na and K levels, and devoid of fish. Blockage of the outlet led to rising waterlevels, followed by dam breakage and catastrophic water discharge. The total energy input during the eruption is estimated at about 10¹⁶ J. The stable isotope composition of the lake water remained dominated by the meteoric meltwaters after the eruption.     

Experimental study of the seismic behavior of partially concrete‐filled steel bridge piers under bidirectional dynamic loading

The seismic behavior of steel bridge piers partially filled with concrete under actual earthquake conditions was investigated by using 20 square section specimens subjected to static cyclic loading tests and single‐directional and bidirectional hybrid loading tests. Acceleration records of two horizontal NS and EW directional components for hard (GT1), medium (GT2), and soft grounds (GT3), obtained during the 1995 Kobe earthquake, were adopted in dynamic tests. Experimental results clearly showed that maximum and residual displacements under actual earthquake conditions cannot be accurately estimated by conventional single‐directional loading tests, especially for GT2 and GT3. A modified admissible displacement was proposed on the basis of bidirectional loading test results. The concrete fill can effectively improve the seismic resistance performance if the concrete inside the steel bridge piers is sufficiently high in quantity. Copyright © 2013 John Wiley & Sons, Ltd.     

A Flexible Prism used as an Image Stabilizer

An image stabilizer was constructed by making use of a flexible prism, which is widely used as an anti-vibration mechanism in handheld video cameras. The prism responds to frequencies up to 20 Hz, and can be simply inserted into existing optics. The performance of the prism has been confirmed by observing the Sun through it.     

Effects of a continental slope along the western boundary on the abyssal circulation

To investigate effects of a continental slope along the western boundary on the abyssal circulation, numerical experiments using multi-level models were carried out. An ocean which extends over the northern and southern hemispheres is forced by cooling inside the ocean at the southwest corner of the basin and uniform heating through the sea surface. When the reference density for the cooling is vertically uniform, effects of the slope emerge clearly for the slope with considerably broad width. The deep western boundary current flowing over the slope feeds no bottom flows in the southern hemisphere, and carries the warmed deep water into the northern hemisphere. This leads to the increased meridional density gradient, which results in the modification of deep flow patterns. When the reference density is vertically distributed, the upper and lower northward flowing western boundary currents form in the deep layer. As the density stratification relaxes the topographic control, the westward intensification of the upper boundary current is achieved over the slope. The intensified flow is accompanied by the countercurrent and they form the horizontal recirculation over the slope. However, the effects are confined around the slope region and the interior flow patterns do not change. The lower boundary current is not significantly affected by the slope and has the large width with no countercurrent. It is found that the actual continental slope does not have significant effects on the gross feature of the thermohaline circulation.     

Sensitivity of CFCs and Anthropogenic CO2 Uptake in a North Pacific GCM to Mixing Parameterization and Surface Forcing

Distributions and characteristics of water mass and chlorofluorocarbons (CFCs) in the North Pacific are investigated by using a General Circulation Model (GCM). The anthropogenic CO₂ uptake by the ocean is estimated with velocity fields derived from the GCM experiments. The sensitivity of the uptake to different diffusion parameterizations and different surface forcing used in the GCM is investigated by conducting the three GCM experiments; the diffusive processes are parameterized by horizontal and vertical eddy diffusion which is used in many previous models (RUN1), parameterized by isopycnal diffusion (RUN2), and isopycnal diffusion and perpetual winter forcing for surface temperature and salinity (RUN3). Realistic features for water masses and CFCs can be simulated by the isopycnal diffusion models. The horizontal and vertical diffusion model fails to simulate the salinity minimum and realistic penetration of CFCs into the ocean. The depth of the salinity minimum layer is better simulated under the winter forcing. The results suggest that both isopycnal parameterization and winter forcing are crucial for the model water masses and CFCs simulations. The oceanic uptake of anthropogenic CO₂ in RUN3 is about 19.8 GtC in 1990, which is larger by about 10% than that in RUN1 with horizontal and vertical diffusive parameterization. RUN3 well simulates the realistic water mass structure of the intermediate layer considered as a candidate of oceanic sink for anthropogenic CO₂. The results suggest that the previous models with horizontal and vertical diffusive parameterization may give the oceanic uptake of anthropogenic CO₂ underestimated. This revised version was published online in August 2006 with corrections to the Cover Date.     

Petrology of mafic inclusions from Itinome-gata,Japan

Various types of mafic inclusions up to 30 cm in size occur in lapilli tuff of alkali basalt at Itinome-gata crater, northeastern Japan. They are divided into the following four groups: amphibolite, hornblendite—hornblende gabbro, leucogabbro, and pyroxene gabbro. Also occurring with the mafic inclusions are lherzolite and websterite inclusions and megacrysts of Mg-rich olivine and chromian diopside. New analyses are presented for twenty five representative mafic inclusions, eight clinopyroxenes, six orthopyroxenes, and fifteen brown hornblendes. There are conspicuous chemical differences between the mafic inclusions and lherzolite and websterite inclusions: the former have higher TiO₂, Al₂O₃, total FeO, CaO, Na₂O, and K₂O, and lower MgO than the lherzolites and higher TiO₂, Al₂O₃, total FeO, and alkalis, and lower MgO than the websterites. The petrographic and chemical gradations among these three are not easily recognized. It is indicated that the Moho in this region is a boundary between mafic and ultramafic phases. The mineral assemblages of the mafic inclusions and the compositions of their essential minerals show that all of them recrystallized or crystallized under approximately the same temperature — pressure conditions, within the range of 600–1000° C and 6–9 kb. The following is hypothetically considered. The old and thick tholeiites or high-alumina basalts (may be pre-Silurian) making up the basement of the Japanese Islands had been subjected to the high T/P type metamorphism during Cretaceous time, and changed to amphibolites. In the cataclastic stage, complete melting of the lower part of the amphibolites occured locally and formed a gabbro magma. This gabbro magma moved upward slightly and produced hornblendite, hornblende gabbro and leucogabbro magmas by differentiation under wet conditions and a pyroxene gabbro magma under less wet conditions. Namely, the mafic inclusions are thought to be of fragments of the lower crust.     

Applying the adjoint-free 4dVar assimilation to modeling the Kuroshio south of Japan

Ocean Dynamics - Operational ocean nowcast/forecast systems require real-time sampling of oceanic data for representing realistic oceanic conditions. Satellite altimetry plays a key role in...