Bedload transport measurements with impact plate geophones: comparison of sensor calibration in different gravel‐bed streams

Indirect bedload transport measurements have been made with the Swiss plate geophone system in five gravel‐bed mountain streams. These geophone sensors record the motion of bedload particles transported over a steel plate mounted flush with the channel bed. To calibrate the geophone system, direct bedload transport measurements were undertaken simultaneously. At the Erlenbach in Switzerland, a moving‐basket sampler was used. At the Fischbach and Ruetz streams in Austria, a Helley–Smith type bedload sampler provided the calibration measurements. A Bunte‐type bedload trap was used at the Rofenache stream in Austria. At the Nahal Eshtemoa in Israel, Reid‐type slot bedload samplers were used. To characterize the response of the geophone signal to bedload particles impacting on the plate, geophone summary values were calculated from the raw signal and stored at one second intervals. The number of impulses, i.e. the number of peaks above a pre‐defined threshold value of the geophone output signal, correlated well with field measured gravel transport loads and was found to be a robust parameter. The relations of impulses to gravel transport loads were generally near‐linear, but the steepness of the calibration relations differed from site to site. By comparing the calibration measurements from the different field sites and utilizing insights gained during preliminary flume experiments, it has been possible to identify the main factors that are responsible for site specific differences in the calibration coefficient. The analysis of these calibration measurements indicates that the geophone signal also contains some information about the grain size distribution of bedload. Copyright © 2013 John Wiley & Sons, Ltd.     

Climate links and recent extremes in antarctic sea ice, high-latitude cyclones, Southern Annular Mode and ENSO

In this article, we study the climate link between the Southern Annular Mode (SAM) and the southern sea-ice extent (SIE), and discuss the possible role of stationary waves and synoptic eddies in establishing this link. In doing so, we have used a combination of techniques involving spatial correlations of SIE, eddy streamfunction and wind anomalies, and statistics of high-latitude cyclone strength. It is suggested that stationary waves may be amplified by eddy anomalies associated with high latitude cyclones, resulting in more sea ice when the SAM is in its positive phase for most, but not all, longitudes. A similar association is observed during ENSO (La Ni?a years). Although this synergy in the SAM/ENSO response may partially reflect preferential areas for wave amplification around Antarctica, the short extent of the climate records does not allow for a definite causality connection to be established with SIE. Stronger polar cyclones are observed over the areas where the stationary waves are amplified. These deeper cyclones will break up and export ice equatorward more efficiently, but the near-coastal regions are cold enough to allow for a rapid re-freeze of the resulting ice break-up. We speculate that if global warming continues this same effect could help reverse the current (positive) Antarctic SIE trends once the ice gets thinner, similarly to what has been observed in the Northern Hemisphere.     

Comparative analysis of four stem taper models for Quercus glauca in Mount Halla,Jeju Island,South Korea

This study was conducted to fit the diameter-height data of Quercusglaucain Jeju Island, South Korea to the four commonly used stem taper equations andto evaluate the performance of the four stem taper models using four statistical criteria： Fit index （FI）, root mean square error （RMSE）, bias （）,and absolute mean difference （AMD）. Results showed that the Kozak02stem taper equation provided the best FI（0.9847）, RMSE（1.5745）,（-0.0030 cm） and AMD （1.0990 cm） whileMax and Burkhart model had the poorest performance among the four stem taper models based on the four evaluation statistics （FI ： 0.9793,RMSE ： 1.8272, ： 0.3040 cm and AMD ： 1.3060 cm）. These stem taper equations can serve as a useful tool for forest managers in estimating the diameter outside bark at any given height, merchantable stem volumes and total stem volumesof the standing trees of Quercusglaucain theGotjawal forests located in Mount Halla, Jeju Island, South Korea.     

Grinding mill circuits — A survey of control and economic concerns

A worldwide survey on grinding mill circuits in the mineral processing industry was conducted. The aims of this survey are to determine how milling circuits are currently controlled, and to find out how key process variables are linked to economic benefits. The survey involves background information on the circuits, the choice of controlled and manipulated variables, the economic impact of the controlled variables, adopted control technologies and assessment of control performance. Sixty-eight responses were received. Survey results are contrasted to the milling control literature.     

The age and stratigraphic context of the Easington Raised Beach, County Durham, UK

The Easington Raised Beach, in Shippersea Bay, County Durham, is the most northerly known interglacial beach deposit in England. It lies directly on Magnesian Limestone bedrock at 33 m O.D. and is covered by glacial sediments attributed to the Devensian. Detailed sedimentological analysis suggests that it is an interglacial beach, which is supported by the presence of pebbles bored by marine organisms and littoral, temperate-climate, marine macro- and micro-fossils. It comprises beds of unconsolidated, bedded, imbricated, well-rounded sands and gravels, overlain by similar, but calcreted, deposits. The gravel fraction is dominated by Magnesian and Carboniferous limestone, with orthoquartzite, flint, and porphyries also present; these are far-travelled erratics that must have derived from the erosion of older glacially transported sediments. Previous workers have described erratics derived from the Oslofjord region of Norway in the raised beach gravel, although rocks diagnostic of a Scandinavian origin have not been recovered as part of this study. The heavy-mineral suite is rich in epidote, dolomite, clinopyroxenes, garnet, tourmaline, and micas. The beach was dated previously by conventional amino acid analysis of the shells, which suggested a Marine Isotope Stage (MIS) 7 age, albeit with a reworked component from MIS 9. This has been confirmed by new optically stimulated luminescence (OSL) dates, which indicate that the beach formed between 240 and 200 ka BP. New amino acid racemisation analyses, using a modified technique, broadly support this interpretation but must await more comparative data before they can be assessed fully. The strong indication of an MIS 7 age for the formation of the beach has implications for the uplift history of northeastern England during the Pleistocene, and indicates an uplift rate of 0.19 mm a⁻¹. The stable isotope geochemistry indicates that the cementation occurred during an interglacial period, whilst U-Series dating of the cement indicates that cementation occurred mostly during the Holocene, and is genetically related to the overlying Devensian till. This work has formed part of a full re-appraisal of the glacial sequence in eastern County Durham, the results of which suggest that the Warren House Formation pre-dates the raised beach, and that the Devensian Horden Till overlies the raised beach.     

Terrestrial and freshwater carbonates in Hoxnian interglacial deposits, UK: micromorphology, stable isotopic composition and palaeoenvironmental significance

MIS 11 is often considered to be the best climatic analogue for the Holocene. Many studies have suggested, however, that it is a period of extreme climate warmth comparable in temperatures to the Middle and Late Pliocene. In Britain deposits of the Hoxnian interglacial are correlated to MIS 11 and multi-proxy techniques can be used to reconstruct the climate of this interglacial. Soil, groundwater and freshwater carbonates are common in Hoxnian deposits and the stable isotopic composition of these precipitates can be used to increase our understanding of MIS 11 environments in Britain. Carbonates from Marks Tey, Clacton, Swanscombe, Elveden and West Stow are studied, the stratigraphic context of which indicates that their formation is broadly synchronous (in the mid-Hoxnian, pollen zones Ho II to Ho III). The carbon isotopic composition of groundwater and pedogenic carbonates is typically depleted with respect to δ¹³C (ca −9 to −8‰ VPDB) reflecting uptake of plant respired CO₂ during water migration/recharge. The carbon isotopic composition of lacustrine carbonate is more enriched with respect to δ¹³C (ca 0-1‰VPDB) reflecting the equilibration of lake waters with atmospheric CO₂. The δ¹⁸O of groundwater and pedogenic carbonates is slightly more enriched than modern soil carbonates but not as enriched as soil carbonates formed under interglacials that were warmer than the Holocene (i.e. the Cromerian). The stable isotopic composition of Hoxnian carbonates does not, therefore, indicate that this interglacial was characterised by uniquely warm climates in the context of other Middle Pleistocene interglacials and the Holocene. This is contrary to many marine and littoral records from around the world but consistent with environmental records from Britain and Europe.     

Climatic and lithologic controls on the temporal and spatial variability of CO2 consumption via chemical weathering: An example from the Australian Victorian Alps

A detailed geochemical study on river waters of the Australian Victorian Alps was carried out to determine: (i) the relative significance of silicate, carbonate, evaporite and sulfide weathering in controlling the major ion composition and; (ii) the factors regulating seasonal and spatial variations of CO₂ consumption via silicate weathering in the catchments. Major ion chemistry implies that solutes are largely derived from evaporation of precipitation and chemical weathering of carbonate and silicate lithologies. The input of solutes from rock weathering was determined by calculating the contribution of halite dissolution and atmospheric inputs using local rain and snow samples. Despite the lack of carbonate outcrops in the study area and waters being undersaturated with respect to calcite, the dissolution of vein calcite accounts for up to 67% of the total dissolved cations, generating up to 90% of dissolved Ca and 97% of Mg. Dissolved sulfate has δ³⁴S values of 16 to 20‰_CDT, indicating that it is derived predominantly from atmospheric deposition and minor gypsum weathering and not from bacterial reduction of FeS₂. This militates against sulphuric acid weathering in Victorian rivers. Ratios of Si vs. the atmospheric corrected Na and K concentrations range from ~ 1.1 to ~ 4.3, suggesting incongruent weathering from plagioclase to smectite, kaolinite and gibbsite.Estimated long-term average CO₂ fluxes from silicate weathering range from ~ 0.012 × 10⁶ to 0.039 × 10⁶ mol/km²/yr with the highest values in rivers draining the basement outcrops rather than sedimentary rocks. This is about one order of magnitude below the global average which is due to low relief, and the arid climate in that region. Time series measurements show that exposure to lithology, high physical erosion and long water–rock contact times dominate CO₂ consumption fluxes via silicate weathering, while variations in water temperature are not overriding parameters controlling chemical weathering. Because the atmospheric corrected concentrations of Na, K and Mg act non-conservative in Victorian rivers the parameterizations of weathering processes, and net CO₂ consumption rates in particular, based on major ion abundances, should be treated with skepticism.     

Implications of the carbonaceous chondrite Mn-Cr isochron for the formation of early refractory planetesimals and chondrules

An excellent ⁵³Mn-⁵³Cr isochron for bulk CI, CM, CO, CV, CB, and ungrouped C3 chondrites seems to suggest that each carbonaceous chondrite group acquired its Mn/Cr ratio 4568 ± 1 Myr ago. This age is indistinguishable from the age of Ca-Al-rich inclusions (CAIs), which is considered to be the start of the solar system (t₀). However, carbonaceous chondrites were not assembled until at least 1.5-5 Myr after t₀, to judge by the ²⁰⁷Pb-²⁰⁶Pb and ²⁶Al-²⁶Mg ages of the chondrules within them, and by the fact that they were not melted by heat from the decay of ²⁶Al. Presumably, therefore, these meteorites inherited their bulk Mn-Cr isochron from precursor materials which experienced Mn-Cr fractionation at t₀. As a possible physical mechanism for how the isochron was established initially, and later inherited by the carbonaceous chondrites, we propose the rapid formation at t₀ of planetesimals that were variably depleted in moderately volatile elements, and hence had variably low Mn/Cr. The planetesimals and the undepleted (high Mn/Cr) primitive dust from which they were made shared the same initial ε⁵³Cr, and therefore evolved on an isochron. We suggest that later impact-disruption of the planetesimals produced dusty debris, which became mixed, in various proportions, with unprocessed (high Mn/Cr) dust before accreting to the carbonaceous chondrite parent bodies. With mixing in a closed system, the isochron was unchanged. We infer that some debris-rich material was converted to chondrules prior to accretion. The chondrules could have been formed by flash melting of the mixed dust, or could instead have been made directly by the impact splashing of molten planetesimals, or by condensation from impact-generated vapor plumes.     

Dissolved organic phosphorus speciation in the waters of the Tamar estuary (SW England)

The speciation of dissolved organic phosphorus (DOP) in the temperate Tamar estuary of SW England is described. Eight stations from the riverine to marine end-members were sampled during four seasonal campaigns in 2007 and the DOP pool in the water column and sediment porewater was characterized and quantified using a flow injection manifold after sequential enzymatic hydrolysis. This enabled the enzymatically hydrolysable phosphorus (EHP) fraction and its component labile monoester phosphates, diester phosphates and a phytase-hydrolysable fraction that includes myo-inositol hexakisphosphate (phytic acid), to be determined and compared with the total DOP, dissolved reactive phosphorus (DRP) and total dissolved phosphorus (TDP) pools. The results showed that the DOP pool in the water column varied temporally and spatially within the estuary (1.1-22 μg L⁻¹) and constituted 6-40% of TDP. The EHP fraction of DOP ranged from 1.1-15 μg L⁻¹ and represented a significant and potentially bioavailable phosphorus fraction. Furthermore the spatial profiles of the three components of the EHP pool generally showed non-conservative behavior along the salinity gradient, with apparent internal estuarine sources. Porewater profiles followed broadly similar trends but were notably higher at the marine station throughout the year. In contrast to soil organic phosphorus profiles, the labile monoester phosphate fraction was the largest component, with diester phosphates also prevalent. Phytic acid concentrations were higher in the lower estuary, possibly due to salinity induced desorption processes. The EHP fraction is not commonly determined in aquatic systems due to the lack of a suitable measurement technique and the Tamar results reported here have important implications for phosphorus biogeochemistry, estuarine ecology and the development of efficient strategies for limiting the effects of phosphorus on water quality.