The distribution of geothermal fields along the East Pacific Rise from 13°10′ N to 8°20′ N: Implications for deep seated origins

In 1983 a combined SeaMARC I, Sea Beam swath mapping expedition traversed the East Pacific Rise from 13°20 N to 9°50 N, including most of the Clipperton Transform Fault at 10°15 N, and a chain of seamounts at 9°50 N which runs obliquely to both the ridge axis and transform fault trends. We collected temperature, salinity and magnetic data along the same track. These data, combined with Deep-Tow data and French hydrocasts, are used to construct a thermal section of the rise axis from 13°10 N to 8°20 N.Thermal data collected out to 25 km from the rise axis and along the Clipperton Transform Fault indicate that temperatures above the rise axis are uniformly warmer by 0.065°C than bottom water temperatures at equal depths off the axis. The rise axis thermal structure is punctuated by four distinct thermal fields with an average spacing of 155 km. All four of these fields are located on morphologic highs. Three fields are characterized by lenses of warmed water 20 km in length and 300 m thick. Additional clues to hydrothermal activity are provided in two cases by high concentrations of CH₄, dissolved Mn and ³He in the water column and in another case by concentrations of benthic animals commonly associated with hydrothermal regions.We use three methods to estimate large-scale heat loss. Heat flow estimates range from 1250 MW to 5600 MW for one thermal field 25 km in length. Total convective heat loss for the four major fields is estimated to lie between 2100 MW and 9450 MW. If we add the amount of heat it takes to warm the rest of the rise axis (489 km in length) by 0.065.°C, then the calculated axial heat loss is from 12,275 to 38,525 MW (19–61% of the total heat theoretically emitted from crust between 0 and 1 m.y. in age).     

A comparison between geostrophic and observed winds at a Japan Meteorological Agency Buoy in the East China Sea

Geostrophic winds (v _g) calculated over the East China Sea from surface pressure maps are compared to observed winds (v _o) from a Japan Meteorological Agency Ocean Data Buoy for the period of January-April 1986. For mean winds, the average counterclockwise veering angle fromv _g tov ₀ is 32° and there is no difference in speed. For fluctuating winds, the Ekman veering and speed reduction fromv _g tov ₀ are respectively 16° and 2%. Co-spectral analysis of the two time series indicates very high coherency and a slight lead in phase by the buoy observations. The phase difference is consistent with the general movement of fronts from west to east and the fact that the geostrophic winds are calculated for a point 155 km to the southeast of the buoy.     

Molecular iodine reduction by natural and model organic substances in seawater

The reactivity of 2 µM molecular iodine in seawater toward various organic compounds containing aromatic, -keto, amino, olefinic and sugar functional groups was investigated. More detailed studies have been made of the reduction kinetics with salicylic acid, -ketoglutaric acid and the polypeptide oxidized glutathione, particularly to establish whether variation over the pH range 4–9 would provide a similar reduction reactivity or fingerprint to that of molecular iodine added to natural seawater. The data indicates that compounds with only one functional group react with first order kinetics whereas compounds with multiple functional groups show more complex behaviour. Kinetic and thermodynamic modelling indicates that HOI is the main iodine species reacting with organic matter at seawater pH of 8.2. Based on the pH fingerprints, peptides and compounds containing carbonyl or -keto groups are the key reductants of molecular iodine added to seawater. These compounds form C-I and N-I bonds which can allow for a rich organic iodine chemistry in seawater. The model compound results are discussed in relation to oceanic processes.     

Determination of inorganic sulphur speciation with polarographic techniques: Some preliminary results for recent hypersaline anoxic sediments

Polarographic techniques have been used to determine reduced inorganic sulphur speciation in recent anoxic marine sediments from two hypersaline basins, the Tyro and the Bannock Basins, in the Eastern Mediterranean. The following phases were determined: acid volatile sulphur (AVS), pyritic sulphur and zerovalent sulphur. The determination of AVS and pyrite was based respectively on the acidification and Cr(II) reduction of these sulphur components to H₂S. H₂S was collected in base and the sulphide concentration was measured by polarography. Standard Na₂S and pyrite gave recoveries of 99.6% ± 3.9% and 97% ± 12% respectively. Total zerovalent sulphur in a sediment sample was measured by the reaction of sulphite with thiosulphate. Thiosulphate was measured directly by polarography.

Pyrite is the main phase of inorganic reduced sulphur in the sediments from the Tyro and the Bannock Basins, and it has about the same average level (125 υmoles per gramme dry weight) in the cores recovered from the two areas. However, the distribution of pyrite in the top 100 cm of the two cores differs significantly. In the Bannock Basin a sharp increase is observed with depth, whereas in the Tyro Basin there is a small decrease with depth.

The total amount of reduced inorganic sulphur is less than the total amount of sulphur in the sediments. This indicates that there must be additional sulphur-bearing phases. One of these phases may be gypsum, and indeed, gypsum crystals have been observed in the Bannock Basin.

In neither basin is there a significant correlation between reduced sulphur and organic carbon. The pyrite that occurs in these basins may have been formed syngenetically at the interface of the anoxic brine and oxic seawater. Diagenetic pyrite may have been formed within the sediments of the basins. AVS and total zerovalent sulphur are still observed at depth. We therefore suggest that this may be due to the incomplete transformation of AVS and zerovalent sulphur into pyrite.     

Neoliberal development through technical assistance: Constructing communities of entrepreneurial subjects in Oaxaca, Mexico

Technical assistance (TA) has a long and varied history as a development practice. It initially emerged as a set of ‘hard’ programs, tools, and technologies delivered to developing countries by imported First World experts, typically in the agricultural and resource sectors. Later, in response to critical and antidevelopment theories, TA morphed into its ‘soft’ version, attempting to empower marginalized people in the Global South by delivering the know-how - often collaboratively generated - sufficient to produce forms of development ‘from below’. In spite of this shift in the politics and practices of TA, it remains susceptible to neoliberal styles of development that have proceeded apace with withdrawal of state institutions in the funding and operation of social and economic development programs, and with the concomitant rise of nongovernmental organizations (NGOs).In this paper, we follow the operation of one TA program operated by an intermediary NGO in Oaxaca, Mexico. We find that the program intersects with neoliberalization in two prominent ways, relying on a form of governmentality that codifies and prescribes: (a) the social spaces of action and need, and (b) learning subjects deficient in entrepreneurial initiative and know-how. We conclude by commenting on the political economic conditions that continue to underwrite TA as a development practice in spite of a decade or more of criticism directed at it and we consider the possibilities for its subversion.     

Temporal variation and the effect of rainfall on metals flux from the historic Beatson mine,Prince William Sound,Alaska, USA

Several abandoned Cu mines are located along the shore of Prince William Sound, AK, where the effect of mining-related discharge upon shoreline ecosystems is unknown. To determine the magnitude of this effect at the former Beatson mine, the largest Cu mine in the region and a Besshi-type massive sulfide ore deposit, trace metal concentration and flux were measured in surface run-off from remnant, mineralized workings and waste. Samples were collected from seepage waters; a remnant glory hole which is now a pit lake; a braided stream draining an area of mineralized rock, underground mine workings, and waste piles; and a background location upstream of the mine workings and mineralized rock. In the background stream pH averaged ∼7.3, specific conductivity (SC) was ∼40 μS/cm, and the aqueous components indicative of sulfide mineral weathering, SO₄ and trace metals, were at detection limits or lower. In the braided stream below the mine workings and waste piles, pH usually varied from 6.7 to 7.1, SC varied from 40 to 120 μS/cm, SO₄ had maximum concentrations of 32 mg/L, and the trace metals Cu, Ni, Pb, and Zn showed maximum total acid extractable concentrations of 186, 5.9, 6.2 and 343 μg/L, respectively.     

Peripheral communities of the Eastern Lau Spreading Center and Valu Fa Ridge: community composition,temporal change and comparison to near‐vent communities

Western Pacific hydrothermal vents will soon be subjected to deep‐sea mining and peripheral sites are considered the most practical targets. The limited information on community dynamics and temporal change in these communities makes it difficult to anticipate the impact of mining activities and recovery trajectories. We studied community composition of peripheral communities along a cline in hydrothermal chemistry on the Eastern Lau Spreading Center and Valu Fa Ridge (ELSC‐VFR) and also studied patterns of temporal change. Peripheral communities located in the northern vent fields of the ELSC‐VFR are significantly different from those in the southern vent fields. Higher abundances of zoanthids and anemones were found in northern peripheral sites and the symbiont‐containing mussel Bathymodiolus brevior, brisingid seastars and polynoids were only present in the northern peripheral sites. By contrast, certain faunal groups were seen only in the southern peripheral sites, such as lollipop sponges, pycnogonids and ophiuroids. Taxonomic richness of the peripheral communities was similar to that of active vent communities, due to the presence of non‐vent endemic species that balanced the absence of species found in areas of active venting. The communities present at waning active sites resemble those of peripheral sites, indicating that peripheral species can colonize previously active vent sites in addition to settling in the periphery of areas of venting. Growth and mortality were observed in a number of the normally slow‐growing cladorhizid stick sponges, indicating that these animals may exhibit life history strategies in the vicinity of vents that differ from those previously recorded. A novel facultative association between polynoids and anemones is proposed based on their correlated distributions.     

Surface water and groundwater interactions in an extensively mined watershed,upper Schuylkill River,Pennsylvania, USA

Streams crossing underground coal mines may lose flow, whereas abandoned mine drainage (AMD) restores flow downstream. During 2005–2012, discharge from the Pine Knot Mine Tunnel, the largest AMD source in the upper Schuylkill River Basin, had near‐neutral pH and elevated concentrations of iron, manganese and sulphate. Discharge from the tunnel responded rapidly to recharge but exhibited a prolonged recession compared with nearby streams, consistent with rapid infiltration of surface water and slow release of groundwater from the mine complex. Dissolved iron was attenuated downstream by oxidation and precipitation, whereas dissolved CO₂ degassed and pH increased. During high flow conditions, the AMD and downstream waters exhibited decreased pH, iron and sulphate with increased acidity that were modelled by mixing net‐alkaline AMD with recharge or run‐off having low ionic strength and low pH. Attenuation of dissolved iron within the river was least effective during high flow conditions because of decreased transport time coupled with inhibitory effects of low pH on oxidation kinetics. A numerical model of groundwater flow was calibrated by using groundwater levels in the Pine Knot Mine and discharge data for the Pine Knot Mine Tunnel and West Branch Schuylkill River during a snowmelt event in January 2012. Although the calibrated model indicated substantial recharge to the mine complex took place away from streams, simulation of rapid changes in mine pool level and tunnel discharge during a high flow event in May 2012 required a source of direct recharge to the Pine Knot Mine. Such recharge produced small changes in mine pool level and rapid changes in tunnel flow rate because of extensive unsaturated storage capacity and high transmissivity within the mine complex. Thus, elimination of stream leakage could have a small effect on the annual discharge from the tunnel, but a large effect on peak discharge and associated water quality downstream. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

Evolution of the chemistry of Fe bearing waters during CO2 degassing

The rates of Fe(II) oxidation and precipitation from groundwater are highly pH dependent. Elevated levels of dissolved CO₂ can depress pH and cause difficulty in removing dissolved Fe and associated metals during treatment of ferruginous water. This paper demonstrates interdependent changes in pH, dissolved inorganic C species, and Fe(II) oxidation rates that occur as a result of the removal (degassing) of CO₂ during aeration of waters discharged from abandoned coal mines. The results of field monitoring of aeration cascades at a treatment facility as well as batchwise aeration experiments conducted using net alkaline and net acidic waters in the UK are combined with geochemical modelling to demonstrate the spatial and temporal evolution of the discharge water chemistry. The aeration cascades removed approximately 67% of the dissolved CO₂ initially present but varying the design did not affect the concentration of Fe(II) leaving the treatment ponds. Continued removal of the residual CO₂ by mechanical aeration increased pH by as much as 2 units and resulted in large increases in the rates of Fe(II) oxidation and precipitation. Effective exsolution of CO₂ led to a reduction in the required lime dose for removal of remaining Fe(II), a very important factor with regard to increasing the sustainability of treatment practices. An important ancillary finding for passive treatment is that varying the design of the cascades had little impact on the rate of CO₂ removal at the flow rates measured.