Using an inerter‐based device for structural vibration suppression

This paper proposes the use of a novel type of passive vibration control system to reduce vibrations in civil engineering structures subject to base excitation. The new system is based on the inerter, a device that was initially developed for high‐performance suspensions in Formula 1 racing cars. The principal advantage of the inerter is that a high level of vibration isolation can be achieved with low amounts of added mass. This feature makes it an attractive potential alternative to traditional tuned mass dampers (TMDs). In this paper, the inerter system is modelled inside a multi‐storey building and is located on braces between adjacent storeys. Numerical results show that an excellent level of vibration reduction is achieved, potentially offering improvement over TMDs. The inerter‐based system is compared to a TMD system by using a range of base excitation inputs, including an earthquake signal, to demonstrate how the performance could potentially be improved by using an inerter instead of a TMD. Copyright © 2013 John Wiley & Sons, Ltd.     

Geo-Characterization at selected accelerometric stations in Crete (Greece) and comparison of earthquake data recordings with EC8 elastic spectra

To estimate the seismic response according to Eurocode (EC8) and almost all other national codes, site conditions have to be properly characterized so that soil amplification and the corresponding peak ground motion can be calculated. In this work, different geophysical and geotechnical methods are combined in order to define the detailed ground conditions in selected sites of the Hellenic Accelerometric Network (HAN) in Crete. For this purpose, the geological information of the sites and shear wave velocity, calculated from surface wave measurements, is used. Additionally, ground acceleration data recorded through HAN have been utilized from intermediate depth earthquakes in the broader area of South Aegean Sea. Using the recorded ground motion data and the procedure defined in EC8, the corresponding elastic response spectrum is calculated for the selected sites. The resulting information is compared to the values defined in the corresponding EC8 spectrum for the seismic zone that includes the island of Crete. The comparison shows that accurate definition of ground type through geological, geotechnical and geophysical investigations is important. However, our current comparison focuses on the distribution of values rather than the absolute values of EC8-prescribed spectra, and the results should be considered in this context.     

Geodynamic evolution of crust accretion at the axis of the Reykjanes Ridge,Atlantic Ocean

The results of analysis of the anomalous magnetic field of the Reykjanes Ridge and the adjacent basins are presented, including a new series of detailed reconstructions for magnetic anomalies 1–6 in combination with a summary of the previous geological and geophysical investigations. We furnish evidence for three stages of evolution of the Reykjanes Ridge, each characterized by a special regime of crustal accretion related to the effect of the Iceland hotspot. The time interval of each stage and the causes of the variation in the accretion regime are considered. During the first, Eocene stage (54–40 Ma) and the third, Miocene-Holocene stage (24 Ma-present time at the northern Reykjanes Ridge north of 59° N and 17–11 Ma-present time at the southern Reykjanes Ridge south of 59° N), the spreading axis of the Reykjanes Ridge resembled the present-day configuration, without segmentation, with oblique orientation relative to the direction of ocean floor opening (at the third stage), and directed toward the hotspot. These attributes are consistent with a model that assumes asthenospheric flow from the hotspot toward the ridge axis. Decompression beneath the spreading axis facilitates this flow. Thus, the crustal accretion during the first and the third stages was markedly affected by interaction of the spreading axis with the hotspot. During the second, late Eocene-Oligocene to early Miocene stage (40–24 Ma at the northern Reykjanes Ridge and 40 to 17–11 Ma at the southern Reykjanes Ridge), the ridge axis was broken by numerous transform fracture zones and nontransform offsets into segments 30–80 km long, which were oriented orthogonal to the direction of ocean floor opening, as is typical of many slow-spreading ridges. The plate-tectonic reconstructions of the oceanic floor accommodating magnetic anomalies of the second stage testify to recurrent rearrangements of the ridge axis geometry related to changing kinematics of the adjacent plates. The obvious contrast in the mode of crustal accretion during the second stage in comparison with the first and the third stages is interpreted as evidence for the decreasing effect of the Iceland hotspot on the Reykjanes Ridge, or the complete cessation of this effect. The detailed geochronology of magnetic anomalies 1–6 (from 20 Ma to present) has allowed us to depict with a high accuracy the isochrons of the oceanic bottom spaced at 1 Ma. The variable effect of the hotspot on the accretion of oceanic crust along the axes of the Reykjanes Ridge and the Kolbeinsey and Mid-Atlantic ridges adjoining the former in the north and the south was estimated from the changing obliquity of spreading. The spreading rate tends to increase with reinforcing of the effect of the Iceland hotspot on the Reykjanes Ridge.     

Seismotectonic deformations related to the 2010 Maule earthquake at different stages of the seismic cycle from satellite geodetic observations

Doklady Earth Sciences - The interpretation of multiannual satellite geodetic observations after the 2010 Maule earthquake is given on the basis of the keyboard concept of the subduction region...     

Age of the Vishnyakovskoe deposit of rare-metal pegmatites (East Sayan): U-Pb geochronological study of manganotantalite

The U-Pb age of the manganotantalite from rare-metal pegmatites of the Vishnyakovskoe deposit (East Sayan Belt) has been assessed at 1838 ± 3 Ma. The acquired data indicate the pegmatites of this deposit and associated granites of the Sayan complex belong to the postcollision South Siberian igneous belt (1.88–1.84 Ga), which stretches along the southwestern frame of the Siberian Craton by more than 2500 km, from the Yenisei Ridge to the Aldan Shield. Formation of this igneous belt is related to joining (starting from about 1.9 Ga BP) of the series of continental microplates and island arcs to the Siberian Craton; this led to final stabilization of the craton at about 1.8 Ga BP.     

Primitive island arc and oceanic lavas from the hunter ridge-hunter fracture zone. Evidence from glass,olivine and spinel compositions

Summary At its southernmost end, the main spreading centre of the North Fiji Basin is propagating into arc crust of the poorly-known Hunter Ridge. We define nine magmatic groups from major element glass chemistry and olivine and spinel compositions in samples dredged from twenty six sites in this area by the R/V Academician A. Nesmeyanov in 1990. These include groups of boninites, island arc tholeiites (IAT), mid-ocean ridge basalts (MORB), enriched mid-ocean ridge basalts (E-MORB), olivine porphyritic andesites and basaltic andesite and Na-rhyolites. Primitive lavas containing highly forsteritic olivine phenocrysts are common in all the groups, except for the rhyolites.We report over 100 glass analyses for dredged rocks from this region, and about 300 olivine-spinel pairs for representatives of all the magmatic groups identified, except the Na-rhyolites.The MORB in this region are probably produced at the propagating spreading centre in the southern part of the North Fiji Basin. Juxtaposition of shallow, hot MORB-source diapirs supplying the MORB in this area, and the sub-arc damp, refractory upper mantle beneath the Hunter Ridge, provides suitable petrogenetic conditions to produce a range of magma types, from island arc tholeiites through to high-Ca boninites. The latter were recovered in eleven dredges.The E-MORB lavas recovered from the extreme southern margin of the North Fiji Basin are shown to be essentially identical to those dredged from adjacent older South Fiji Basin crust. It is hypothesized that the former were either scraped off the South Fiji Basin crust during an episode of oblique subduction that may have generated the Hunter Ridge during the last 5 Myr, or alternatively, that slices of the South Fiji Basin crust were trapped and incorporated into the North Fiji Basin as the subduction zones fronting the Vanuatu arc stepped or propagated southward.

---

Primitive Inselbogen- und ozeanische Laven von Hunter Rücken und der Hunter BruchZone: die Bedeutung der Zusammensetzung von Glas, Olivin und Spinell

Zusammenfassung Das spreading centre des Nord-Fidschi-Beckens setzt sich an seinem südlichsten Ende in die Inselbogen-Kruste des noch wenig bekannten Hunter-Rückens fort.Wir definieren 9 magmatische Gruppen auf der Basis der Hauptelement-Zusammensetzung von Gläsern und der Zusammensetzung von Olivin und Spinell in Proben die das Forschungsschiff R/V Akademiker A. Nesmeyanov von 26 Stellen im Jahr 1990 aufgesammelt hat. Zu diesen gehören Gruppen von Boniniten, Inselbogentholeiiten (IAT), Basalten zentralozeanischer Rücken (MORB), angereicherte zentralozeanische Rücken (E-MORB), Olivin-porphyritische Andesite und basaltische Andesite, sowie Na-Rhyolite. Primitive Laven mit Olivinkristallen, die reich an Forsterit-Komponenten sind, kommen in allen diesen Gruppen, mit Ausnahme der Rhyolite, vor.Wir legen über 100 Glas-Analysen von Gesteinen aus diesem Gebiet vor und über 300 Olivin-Spinell-Paare für Vertreter aller der hier identifizierten magmatischen Gruppen, mit Ausnahme der Natriumrhyolite.Die MORB in diesem Gebiet sind wahrscheinlich an dem aktiven Spreading Center im Südteil des Nord-Fidschi-Beckens entstanden. Das nebeneinander Vorkommen von seichten heißen MORB-Quellen Diapiren, die MORB in diesem Gebiet erzeugen, und der Sub-Inselbogen, wasserhaltige, refraktäre obere Mantel unter dem Hunter Rücken führen zu geeigneten petrogenetischen Bedingungen für die Entstehung einer Vielfalt von Magmatypen, von Inselbogentholeiiten bis zu sehr Kalziumreichen Boniniten. Die letzteren wurden in 11 Dredge-Proben gefunden.Die E-MORS Laven, die aus dem extremen Südteil des Nord-Fidschi-Beckens entnommen wurden, sind im wesentlichen mit jenen identisch, die aus der benachbarten älteren Kruste des Süd-Fidschi-Beckens stammen. Es wird vermutet, daß die letzteren entweder aus dem Süd-Fidschi-Becken während einer Episode obliger Subduktion, die in den letzten 5 Millionen Jahren zur Entstehung des Hunter Ridge geführt hat, abgeschert wurden, oder auch daß Teile der Kruste des Süd-Fidschi-Beckens in das Nord-Fidschi-Becken inkorporiert wurden als Subduktionszonen gegenüber dem Vanuato-Bogen sich nach Süden fortbewegten.

     

Composition of hydrous melts in equilibrium with quartz eclogites

Summary Compositions of the hydrous melts in equilibrium with garnet, omphacitic clinopyroxene and quartz have been investigated experimentally at 28.5 and 35 kbar. They are represented by silica-rich liquids (> 70% SiO₂) with low MgO, FeO and CaO contents. The removal of ca 10–15% of the magma of this composition may be sufficient to convert quartz eclogite formed after subduction of altered MORB into a quartz-free bimineralic eclogite assemblage, which is a common type of xenoliths in kimberlites.At 28.5 kbar the solidus temperature is between 700 and 750° C in the system quartz eclogite—water, and the high pressure amphibole-out boundary lies at ca 25 kbar in accord with the previous studies.

---

Die Zusammensetzung wasserhältiger Schmelzen im Gleichgewicht mit Quarz-Eklogiten

Zusammenfassung Um Prozesse zu simulieren, die bei der Subduktion von Ozeanbodenbasalten durch partielle Anatexis im Stabilitätsfeld von Eklogiten ablaufen, wurde die Zusammensetzung wasserhältiger Schmelzen in Gleichgewicht mit Granat, Omphacit und Quarz bei 28.5 und 35 Kbar experimentell untersucht. Diese Schmelzen sind reich an SiO₂ (> 70 Gew%) und arm an Mg0, Fe0 and CaO. Die Extraktion von ca. 10–15% derartiger Schmelzen würde genügen, um quarzführende Eklogite, die durch die Subduktion von alteriertem MORB Material entstanden sind, in quarzfreie bimineralische Eklogite umzuwandeln wie sie häufig als Xenolithe in Kimberliten beobachtet werden.Im System Quarz-Eklogit-Wasser liegt die Solidustemperatur bei 28.5 Kbar zwischen 700 und 750°C. Die obere Stabilitätsgrenze von Amphibol liegt in diesem Temperaturbereich bei ca. 25 Kbar.

---

---

With 1 Figures     

The southern cape conductive belt (South Africa): Its composition, origin and tectonic significance

Magnetometer array studies have led to the discovery and mapping of the Southern Cape Conductive Belt (SCCB) crossing the southern tip of Africa from west to southeast coasts. The SCCB lies just south of the Namaqua-Natal Belt of cratonic rocks remobilized about 1000 m.y. B.P. It is shown that it coincides with a zone of weakness which has been exploited by three major geosynclinal accumulations over some 600 m.y. Relationships between the SCCB and the basement geochronology, geology and tectonics are considered in detail. These relationships support the view that the conductive belt was formed by an accumulation of marine sediments and oceanic lithosphere at the top of a Proterozoic subduction which stopped about 1000 to 800 m.y. B.P. Associated with this subduction we propose a Proterozoic range of Andean mountains, whose roots are now exposed in the Namaqua-Natal Belt. Later subduction further south, near the present south coast, is proposed to account for the intrusion, between the south coast and the SCCB, of the Cape Granites in the time interval 600-500 m.y. B.P. There is some evidence for a third, yet more distant, subduction episode off Permian Gondwanaland. After outlining this tectonic history, the paper turns to a closer examination of the hypothesis that the Southern Cape Conductive Belt consists of partly serpentinized basalt accumulated at the top of a Proterozoic subduction. A large static magnetic anomaly, which correlates with the SCCB over most of its length, is well fitted by a model which strongly supports this hypothesis. Bouguer gravity anomalies along western and central profiles likewise support the hypothesis. A discussion follows of the process of formation of the proposed block of serpentinized marine rocks, beginning with serpentinization of the crust near oceanic ridges by reaction of warm, porous, newly-extruded basalt with seawater convecting through it. The serpentinized basalt is stable at crustal temperatures and pressures and so is transported in the seafloor until it reaches a subduction, where it accumulates because of its low density. Examples of such accumulations are cited. Finally, it is shown that any iron in the olivine and pyroxene in the original basalt precipitates, when these silicates are hydrated to serpentine, as magnetite which is the dominant mineral conferring high electrical conductivity and high magnetic susceptibility on serpentinites. In particular the Beattie static magnetic anomaly requires, in our model calculation, a very high susceptibility readily attainable in basalt at 15–20% serpentinization. The authors know of no other rock able to provide this high susceptibility. A similar percentage of serpentinization provides the density required to model the gravity anomalies.     

Dissolved nutrient balance and net ecosystem metabolism in a Mediterranean-climate coastal lagoon: San Diego Bay

The temporal and spatial variability of dissolved inorganic phosphate (DIP), nitrogen (DIN), carbon (DIC) and dissolved organic carbon (DOC) were studied in order to determine the net ecosystem metabolism (NEM) of San Diego Bay (SDB), a Mediterranean-climate lagoon. A series of four sampling campaigns were carried out during the rainy (January 2000) and the dry (August 2000 and May and September 2001) seasons. During the dry season, temperature, salinity and DIP, DIC and DOC concentrations increased from oceanic values in the outer bay to higher values at the innermost end of the bay. DIP, DIC and DOC concentrations showed a clear offset from conservative mixing implying production of these dissolved materials inside the bay. During the rainy season, DIP and DOC increased to the head, whereas salinity decreased toward the mouth due to land runoff and river discharges. The distributions of DIP and DOC also showed a deviation from conservative mixing in this season, implying a net addition of these dissolved materials during estuarine mixing within the bay. Mass balance calculations showed that SDB consistently exported DIP (2.8–9.8 × 10³ mol P d⁻¹), DIC (263–352 × 10³ mol C d⁻¹) and DOC (198–1233 × 10³ mol C d⁻¹), whereas DIN (5.5–18.2 × 10³ mol N d⁻¹) was exported in all samplings except in May 2001 when it was imported (8.6 × 10³ mol N d⁻¹). The DIP, DIC and DOC export rates along with the strong relationship between DIP, DIC or DOC and salinity suggest that intense tidal mixing plays an important role in controlling their distributions and that SDB is a source of nutrients and DOC to the Southern California Bight. Furthermore, NEM ranged from −8.1 ± 1.8 mmol C m⁻² d⁻¹ in September to −13.5 ± 5.8 mmol C m⁻² d⁻¹ in January, highlighting the heterotrophic character of SDB. In order to explain the net heterotrophy of this system, we postulate that phytoplankton-derived particulate organic matter, stimulated by upwelling processes in the adjacent coastal waters, is transported into the bay, retained and then remineralized within the system. Our results were compared with those reported for the heterotrophic hypersaline coastal lagoons located in the semi-arid coast of California–Baja California, and with those autotrophic hypersaline systems found in the semi-arid areas of Australia. We point out that the balance between autotrophy and heterotrophy in inverse estuaries is dependent on net external inputs of either inorganic nutrients or organic matter as it has been indicated for positive estuaries.