Characterization of the mechanical properties of a claystone by nano-indentation and homogenization

Based on the analyses of mineralogical compositions by X-ray diffraction and microstructure by optical microscopy, the Young’ modulus and hardness of a claystone were characterized by the nano-indentation technique and homogenization method. Three distinct microstructural zones are identified in the claystone: clay matrix, a composite matrix of clay and small mineral grains and imbedded quartz grains. The elastic modulus and hardness of different zones were determined by nano-indentation testing. Based on the statistical analysis of nano-indentation results, the spatial mappings and frequency distributions of elastic modulus and hardness of the different zones were obtained. The elastic moduli of main constituent phases of the claystone are then estimated from the nano-indentation tests. These values were further used for the determination of the macroscopic elastic modulus of the claystone using two different homogenization schemes: the dilute scheme and Mori–Tanaka scheme. The predicted values by the homogenization schemes are compared with experimental data obtained from conventional uniaxial compression tests.     

Correlation analysis between drought indices and terrestrial water storage from 2002 to 2015 in China

Drought monitoring is a key topic in environmental monitoring and assessment although there is still a need to determine the correlation between drought monitoring indices and remote sensing products. We analyzed the correlation between the self-calibrating Palmer Drought Severity Index (sc_PDSI), the Standardized Precipitation Index and the Standardized Precipitation Evapotranspiration Index (SPEI) and terrestrial water storage monitored through the Gravity Recovery and Climate Experiment (GRACE) on a monthly timescale from 2002 to 2015 in China. As a consequence of anomalies in the soil water budget, the highly significant correlation between the sc_PDSI and the GRACE satellite-observed terrestrial water storage suggested that these two datasets are the most suitable for use in monitoring droughts. In comparing the three drought indices, the sc_PDSI was introduced as a means of drought monitoring in the Yangtze, Pearl, Huaihe, Southeast and Songhua River Basins, whereas the SPEI was found to be more applicable to other major river basins, such as the Inland River Basin. These diverse spatial behaviors are caused by the differences between the hydrological droughts characterized by these three drought indices.     

Numerical simulation of lifetime and time-dependent damage for granite by continuous and discontinuous approaches

In this study, the time-dependent damage process of granite is investigated utilizing two numerical simulation schemes based on continuous method and discontinuous method. Numerical creep tests are carried out with both simulation schemes and mechanical responses and fracture patterns of rock specimens are analyzed. The calibrated numerical models can successfully reflect the typical creep stages observed in the laboratory. The predicted lifetime is in accordance with the laboratory test data. Comparisons are made between the two simulation schemes. It is found that both schemes have unique features that can promote a genuine reflection of the time-dependent damage process of the brittle rocks.     

Efficacy of laser cleaning in the removal of biological patina on the volcanic scoria of the rock-hewn churches of Lalibela,Ethiopia

The Lalibela rock-hewn churches are one of the most important religious pilgrimage sites in Ethiopia. These churches are carved from the scoriaceous basalt rock substrate, which has been exposed to attack by biological agents with significant loss of surface material. Particularly, the widespread growth of lichens and other microorganisms on the carved surfaces of the churches has proven to represent a substantial threat for the preservation of the site. In this study, laboratory tests have been conducted to assess the feasibility of using laser technology as an efficient cleaning method of biological patina from polymineralic stone substrates. Multi-analytical techniques were applied for the characterization of the stone samples collected from two of the Lalibela churches: Bete Giyorgis and Bete Amanuel. Stone samples artificially inoculated with bacteria, yeast, fungi isolates, and lichen-encrusted samples were laser cleaned using UV and IR laser wavelengths. The high content of Fe and Ti oxides and the high porosity have made the stone surfaces easily susceptible to low-energy laser treatment. Results indicate that laser cleaning can be applied to polymineralic lithotypes and UV irradiation can successfully remove lichen colonies. Further studies need to be conducted to optimize the laser procedure in polymineralic, high porosity stones.     

Hypsometric analysis of the micro-watersheds with different management practices located on Shivalik foothills

In this paper, the hypsometric curves and integrals of four neighboring micro-watersheds draining into Patiala-Ki-Rao stream which is situated in the Shivalik foothills of district SAS Nagar in the Punjab state (India) has been presented to access and compare the erosion regimes under different management practices. Area-elevation ratio method has been used to compute hypsometric curve and integral values for each micro-watershed through ArcGIS 10.3 and Microsoft Excel. The 9-year data of runoff and sediment yield for all these micro-watersheds under different management practices has been analyzed for their effect on land cover and soil quality. Thus, the results of present study are very useful for comparing, planning, implementing, and controlling soil erosion in similar watersheds.     

Towards a Digital Earth: using archetypes to enable knowledge interoperability within geo-observational sensor systems design

Earth System Science (ESS) observational data are often inadequately semantically enriched by geo-observational information systems to capture the true meaning of the associated data sets. Data models underpinning these information systems are often too rigid in their data representation to allow for the ever-changing and evolving nature of ESS domain concepts. This impoverished approach to observational data representation reduces the ability of multi-disciplinary practitioners to share information in a computable way. Object oriented techniques that are typically employed to model data in a complex domain (with evolving domain concepts) can unnecessarily exclude domain specialists from the design process, invariably leading to a mismatch between the needs of the domain specialists, and how the concepts are modelled. In many cases, an over simplification of the domain concept is captured by the computer scientist. This paper proposes that two-level modelling methodologies developed by health informaticians to tackle problems of domain specific use-case knowledge modelling can be re-used within ESS informatics. A translational approach to enable a two-level modelling process within geo-observational sensor systems design is described. We show how the Open Geospatial Consortium’s (OGC) Observations & Measurements (O&M) standard can act as a pragmatic solution for a stable reference-model (necessary for two-level modelling), and upon which more volatile domain specific concepts can be defined and managed using archetypes. A rudimentary use-case is presented, followed by a worked example showing the implementation methodology and considerations leading to an O&M based, two-level modelling design approach, to realise semantically rich and interoperable Earth System Science based geo-observational sensor systems.     

Accessing effects and signals of leakage from a CO<Subscript>2</Subscript> reservoir to a shallow freshwater aquifer by reactive transport modelling

CO₂ geological storage is a transitional technology for the mitigation of climate change. In the vicinity of potential CO₂ reservoirs in Hungary, protected freshwater aquifers used for drinking water supplies exist. Effects of disaster events of CO₂ escape and brine displacement to one of these aquifers have been studied by kinetic 1D reactive transport modelling in PHREEQC. Besides verifying that ion concentrations in the freshwater may increase up to drinking water limit values in both scenarios (CO₂ or brine leakage), total porosity of the rock is estimated. Pore volume is expected to increase at the entry point of CO₂ and to decrease at further distances, whereas it shows minor increase along the flow path for the effect of brine inflow. Additionally, electrical conductivity of water is estimated and suggested to be the best parameter to measure for cost-effective monitoring of both worst-case leakage scenarios.     

Synthesis and characterisation of a multifunctional oil-based drilling fluid additive

An oil-based drilling fluid additive H-DEA (or humic acid-cocamide diethanolamine) was synthesised using humic acid and cocamide diethanolamine as raw materials. The rheological behaviors of H-DEA showed that the synthesised product has the good properties in both decreasing the filtrate loss and improving rheology property of oil-based drilling fluids compared with other commercially available additives. Under the optimal additive amount of 3%, both API filtrate loss and yield point changed remarkably from 5.40 to 0.41 mL and 9.0 to 25.6 Pa, respectively. Furthermore, differential scanning calorimetry (DSC) showed that H-DEA has good thermal stability in a wide temperature range up to 170 °C. Infrared spectroscopy (IR) and rheological analysis revealed that the possible mechanism of the multifunctional effects may be attributed to the existing of high density of strong polar groups, hydrogen bonds, electrostatic forces, and intermolecular association on H-DEA molecular structure. The results of the study showed that the synthesised H-DEA can be potentially used as a multifunctional oil-based drilling fluid additive in oil-drilling excavation.     

Effects of vegetation restoration on soil physical properties of abandoned farmland on the Loess Plateau,China

To improve the ecological environment in China, the Chinese government implemented a country-wide ecological protection and reforestation project (namely the “Grain for Green Project”) in 1999 to return cultivated land with slopes of 25° or more to perennial vegetation. Vegetation restoration reduces soil erosion mainly by changing the soil physical properties. Different vegetation restoration methods might produce different impacts on soil physical properties. In this study, two vegetation restoration methods (i.e., natural restoration and artificial restoration) were compared on abandoned farmland in the typically hilly and gullied areas of the Loess Plateau of Northwest China. In the natural restoration method, the farmland was abandoned to natural vegetation succession without irrigation, fertilization or other artificial disturbances. In the artificial restoration method, the farmland was planted with black locust (Robinia pseudoacacia L.) and watered and cultivated for the first two years. Three soil physical properties (i.e., soil moisture, bulk density and aggregation) were investigated under the two vegetation restoration methods. The results showed that the soil moisture and soil bulk density were higher under artificial restoration than under natural restoration within the first three years of vegetation restoration. By the fourth year, the soil moisture and soil bulk density were higher under natural restoration than under artificial restoration. For the stability of soil aggregates?>?0.25 mm, the soil aggregates in the 0-20 cm soil layer were more stable under artificial restoration than under natural restoration, while the results were the opposite for the 40-60 cm soil layer. Overall, the soil physical properties were continuously improved during the restoration of vegetation on abandoned farmland. In choosing between vegetation restoration methods, natural restoration is preferable to artificial restoration, but artificial intervention is needed during the first three years.