川东南丁山地区龙马溪组页岩裂缝特征及对含气性的影响

川东南丁山地区是近年来四川盆地页岩气勘探开发的热点区域,裂缝的发育对页岩含气性及保存条件有重要的影响。综合运用野外露头、岩心、测井资料,结合岩石脆性矿物含量、岩石力学参数等数据,深入分析龙马溪组页岩裂缝发育特征和控制因素,并探讨了裂缝发育对含气性的影响。结果表明,丁山地区龙马溪组页岩裂缝主要以构造成因的剪切缝为主,裂缝优势方位共6组,主要包括4组平面剪切缝和2组剖面剪切缝,其发育主要受2个方向、3个阶段的构造应力场影响而成;裂缝延伸稳定,平均密度小,宽度小,充填程度高,主要被方解石和黄铁矿等充填。裂缝受控因素主要包括古构造应力场、构造部位、脆性矿物组分、岩石力学性质等;断层对裂缝发育具有明显的控制作用,其中断层两盘均存在裂缝发育程度急剧下降的临界范围,临界范围内裂缝发育程度高,超过此临界范围,裂缝发育程度变差且变化趋于平缓;不同期次的裂缝中,形成时间晚、规模过大、充填程度不高、与现今地应力方向一致或呈低角度相交的裂缝易造成页岩气的散失,对提高页岩含气性不利;龙马溪组岩石脆性矿物含量高,脆性指数属中等偏上程度,有利于构造缝发育且可压性较好。随着距齐岳山断裂距离的适当增加,龙马溪组页岩埋藏深度适中,地层压力增大,抗压强度增强高,脆性指数适中,构造保存条件变好,有利于不同方位的裂缝发育和页岩含气量的增加,位于该区域的DY2井与DY4井均位于该有利区域,含气性良好。研究结果对下一步深化页岩气勘探开发具有重要指导作用。     

基于决策到决策路径的遗传算法软件测试用例设计

测试用例生成优劣是软件测试自动化效率高低至关重要的一点,常用的随机测试用例自动生成方法虽然实现简单,但具有效率低、冗余大的缺点,而遗传算法适合于处理传统方法难以解决的非线性问题。为了提高测试效率、降低测试成本,通过分析测试用例自动生成和遗传算法的基本理论,在面向决策到决策路径的软件测试基础上,利用程序控制流图详细阐释了对基于遗传算法的测试用例自动生成技术的设计。通过与随机法自动用例生成进行试验对比,表明其效率至少是随机法10倍。     

气候变化背景下我国灾害风险治理路径初探

在全球气候变化背景下,自然灾害风险加剧,传统以政府为主体的灾害管理体制和机制已经无法有效应对自然灾害,因此开展国家在气候变化背景下的自然灾害综合风险治理具有重要意义和紧迫性。本文介绍了我国灾害管理体制的发展历程及转型过程,提出关于我国气候变化的自然灾害综合风险治理具体路径的建议措施,包括完善自然灾害综合风险治理体系,实现五个长效机制,加强应对气候变化的风险研究。     

GPS-RTK测量结果的精度分析

由于GPS-RTK测量缺少必要的检核条件,作业时如果操作失误或者处理不当,会给测量成果带来严重影响,在此本文对在湖面,高层建筑物,高压线周围布置一些点,用已知点位法,用全站仪测量出来的坐标和GPS-RTK观测的点坐标进行对比,分析对比RTK显示精度和真实精度的关系,从而来讨论GPS-RTK测量结果的精度和可靠性问题.     

风廓线雷达中风切变分析方法的初步研究

在风廓线雷达连续输出的风场时间高度显示图上,尝试进行风场的流线分析和风切变值等值线分析,以便用于识别强烈风切变区。在风场变化比较均匀时,分析出的线形分布比较平缓,而在风场变化比较剧烈的区域,风向等值线、垂直风切变等值线和流线三者一致表现出了汇聚特点,线形的分布也异常地密集,分析结果直观地反映出了风场分布的特征和危险性风切变区域,该结果有助于风切变自动识别方法的研究。     

塔里木盆地寒武—奥陶系主要白云岩类型及孔隙发育特征

塔里木盆地寒武系和下奥陶统白云岩广泛发育,岩石类型复杂多样。按照结构和特殊构造两大分类依据,文中将研究区白云岩归为6大类,即泥-粉晶白云岩(又按含膏与否进一步分为含膏泥-粉晶白云岩和不含膏泥-粉晶白云岩)、粉-细晶白云岩、中-粗晶白云岩、斑状白云岩、藻纹层白云岩和膏溶角砾白云岩。每类白云岩都可以其独具特色的晶体结构和/或沉积构造与其他类型相区分。在这些白云岩中发育的孔隙类型主要有6种,即窗格孔、铸模孔、晶间孔、溶孔、角砾孔及砾间溶孔和缝合线孔,其中除窗格孔为原生孔隙外,其余均属次生孔隙。就其储集意义而言,以溶孔和晶间孔最为重要,次为角砾孔及砾间溶孔,而铸模孔和窗格孔的储集意义相对次要。缝合线孔的意义主要有二:一是可改善储集岩的渗透性,二是与斑状白云岩配合还可能构成有效储集岩。     

沉积钙质白云石带状面缺陷的择优取向

作者用透射电子显微镜研究了沉积钙质白云石中的带状面缺陷。在衍衬象中面缺陷呈现出特有的条纹衬度,并具有一定的择优取向,它们沿着｛018｝面排列。面缺陷也可分叉,分枝部分平等于｛2－／10｝面。根据白云石面缺陷的取向,本文提出了鞍状白云石宏观弯曲面和微观面缺陷的取向关系。     

Assessment of alternative adsorption models and global sensitivity analysis to characterize hexavalent chromium loss from soil to surface runoff

We investigate our ability to assess transfer of hexavalent chromium, Cr(VI), from the soil to surface runoff by considering the effect of coupling diverse adsorption models with a two‐layer solute transfer model. Our analyses are grounded on a set of two experiments associated with soils characterized by diverse particle size distributions. Our study is motivated by the observation that Cr(VI) is receiving much attention for the assessment of environmental risks due to its high solubility, mobility, and toxicological significance. Adsorption of Cr(VI) is considered to be at equilibrium in the mixing layer under our experimental conditions. Four adsorption models, that is, the Langmuir, Freundlich, Temkin, and linear models, constitute our set of alternative (competing) mathematical formulations. Experimental results reveal that the soil samples characterized by the finest grain sizes are associated with the highest release of Cr(VI) to runoff. We compare the relative abilities of the four models to interpret experimental results through maximum likelihood model calibration and four model identification criteria (i.e., the Akaike information criteria [AIC and AIC_C] and the Bayesian and Kashyap information criteria). Our study results enable us to rank the tested models on the basis of a set of posterior weights assigned to each of them. A classical variance‐based global sensitivity analysis is then performed to assess the relative importance of the uncertain parameters associated with each of the models considered, within subregions of the parameter space. In this context, the modelling strategy resulting from coupling the Langmuir isotherm with a two‐layer solute transfer model is then evaluated as the most skilful for the overall interpretation of both sets of experiments. Our results document that (a) the depth of the mixing layer is the most influential factor for all models tested, with the exception of the Freundlich isotherm, and (b) the total sensitivity of the adsorption parameters varies in time, with a trend to increase as time progresses for all of the models. These results suggest that adsorption has a significant effect on the uncertainty associated with the release of Cr(VI) from the soil to the surface runoff component.     

植物消浪护岸模型实验研究

对于在堤岸上种树消浪这一新的护岸工程,根据实际波浪要素和现有实验设备条件确定出几何比尺,选取桧柏树枝作为防浪树的模型,筛选主要影响因素进行量纲分析,确定实验组次,对实验现象和数据作定性和定量的分析,得出防浪林应有相当的宽度,才能起到预期的防浪护岸效果,防浪林过窄,可能会引起“共振”现象,并且斜坡的消浪效果好于平坡,对实际工程可起参考作用。     

Thrusting of the North Lhasa Block in the Tibetan Plateau

A huge thrust system, the North Lhasa Thrust (NLT), was discovered in the northern Lhasa block of the Tibetan Plateau based on geological mapping of the Damxung region and its vicinity, the Deqen-Lunpola traverse and the Amdo-Bam Co profile. The NLT consists of the Dongqiao-Lunpola thrust (DLT), the west Namco thrust (WNT) and the south Damxung thrust (SDT) and ductile shear zones, ophiolite slices and folds extending in a WNW direction. Major thrust faults of the NLT seem to merge into a single deep-seated detachment of the upper-crust and totally displaced southward as far as 100-120 km. Chronological analyses with 39Ar-40Ar of plagioclase and hornblende, Rb-Sr isochron of minerals and fission-tracks of apatite from mylonite within the WNT yield ages of 174-173 Ma, 109 Ma and 44 Ma, showing 3 periods of thrusting in the north Lhasa block caused by subduction of the Tethys oceanic plate and the India-Eurasia continental collision respectively.