Comparative efficiency analysis of different nonlinear modelling strategies to simulate the biaxial response of RC columns

The performance of different nonlinear modelling strategies to simulate the response of RC columns subjected to axial load combined with cyclic biaxial horizontal loading is compared. The models studied are classified into two categories according to the nonlinearity distribution assumed in the elements: lumped-plasticity and distributed inelasticity. For this study, results of tests on 24 columns subjected to cyclic uniaxial and biaxial lateral displacements were numerically reproduced. The analyses show that the global envelope response is satisfactorily represented with the three modelling strategies, but significant differences were found in the strength degradation for higher drift demands and energy dissipation.     

Lithology and fluid prediction from prestack seismic data using a Bayesian model with Markov process prior

We invert prestack seismic amplitude data to find rock properties of a vertical profile of the earth. In particular we focus on lithology, porosity and fluid. Our model includes vertical dependencies of the rock properties. This allows us to compute quantities valid for the full profile such as the probability that the vertical profile contains hydrocarbons and volume distributions of hydrocarbons. In a standard point wise approach, these quantities can not be assessed. We formulate the problem in a Bayesian framework, and model the vertical dependency using spatial statistics. The relation between rock properties and elastic parameters is established through a stochastic rock model, and a convolutional model links the reflectivity to the seismic. A Markov chain Monte Carlo (MCMC) algorithm is used to generate multiple realizations that honours both the seismic data and the prior beliefs and respects the additional constraints imposed by the vertical dependencies. Convergence plots are used to provide quality check of the algorithm and to compare it with a similar method. The implementation has been tested on three different data sets offshore Norway, among these one profile has well control. For all test cases the MCMC algorithm provides reliable estimates with uncertainty quantification within three hours. The inversion result is consistent with the observed well data. In the case example we show that the seismic amplitudes make a significant impact on the inversion result even if the data have a moderate well tie, and that this is due to the vertical dependency imposed on the lithology fluid classes in our model. The vertical correlation in elastic parameters mainly influences the upside potential of the volume distribution. The approach is best suited to evaluate a few selected vertical profiles since the MCMC algorithm is computer demanding.     

Distribution and thickness of sedimentary facies in the coastal dune, beach and nearshore sedimentary system at Maspalomas, Canary Islands

Numerous studies have shown that most beaches and coastal dune systems of the world are currently eroding but very few have investigated the combined sediment budgets of subaerial and nearshore submarine systems. In the case of the dune field of the Maspalomas Natural Special Reserve (in the south of Gran Canaria), the adjacent Maspalomas and El Inglés beaches and the adjacent submarine platform, the sediment budgets have been severely affected by erosion over the past few decades. The objectives of this study were to investigate the availability of sand within the modern sedimentary system, including the coastal dunes, the beaches and the submerged shelf, but also to assess local sediment sinks. An isopach map generated on the basis of topo-bathymetric data and seismic-reflection profiles revealed that sediment thickness varies from 0–22 m in the study area. Expanses of relatively low sediment thickness were identified in the south-western sector of the coastal dune field along Maspalomas beach, and in the nearshore region to the south of this beach. These localized sediment-deficit areas earmark Maspalomas beach as the most vulnerable shore strip threatened by erosion. The shallow seismic data also revealed that the submarine platform south of Maspalomas represents a marine terrace cut into an ancient alluvial fan, thus documenting an influence of the geomorphological heritage on the present-day morphodynamics. A side-scan sonar mosaic of this nearshore platform enabled the delimitation of areas covered by rock, boulders and gravel, vegetated sand patches and a mobile sand facies, the latter including ripple and megaripple fields. The megaripple field in a valley close to the talus of the marine terrace has been identified as a major sediment sink of the Maspalomas sedimentary system. It is fed by south-westerly storm-wave events. The sediment deficit in the coastal dune field and along Maspalomas beach can therefore only be explained by a currently faster loss of sediment to an offshore sink than can be compensated by the supply of sand from outside the system.     

The spatial and seasonal variation of trace metals in coastal seawater and soft tissue of <Emphasis Type="Italic">Chthamalus montagui</Emphasis> around the northwest coast of Portugal

Metal concentrations (Cd, Cr, Cu, Fe, Mn and Zn) were determined in seawaters and soft tissues of Chthamalus montagui from the northwest coast of Portugal during the four seasons of 2011. The main objectives of this work were to assess seasonal and spatial variations of metals in order to detect hot spots of contamination, to establish correlations between metals in coastal seawaters and C. montagui and to calculate metal bioaccumulation factors (BAFs) in each season. Metal concentrations in coastal seawaters ranged within Cd: 1.2–35 ng L^?1; Cr: 15–87 ng L^?1; Mn: 77–1763 ng L^?1; Cu: 126–1819 ng L^?1; Fe: 430–4048 ng L^?1 and Zn: 2889–16867 ng L^?1 and in C. montagui ranged for Cd: 0.39–1.98 mg kg^?1; Cr: 0.45–3.13 mg kg^?1; Cu: 0.93–5.70 mg kg^?1; Mn: 2.2–20.4 mg kg^?1; Fe: 135–707 mg kg^?1 and Zn: 119–782 mg kg^?1. Significant spatial and seasonal variations were found between: (i) metal concentrations in seawaters and C. montagui tissues; (ii) the distribution of metal concentrations in C. montagui tissues were Fe > Zn > Mn > Cu > Cr > Cd and (iii) C. montagui showed higher bioaccumulation factors for Fe and Cd than for Cu, Mn and Zn in all seasons. Regarding the metal concentrations accumulated in C. montagui tissues during each season of 2011, the ecological quality classifications of the NW coast of Portugal varied from “Class I–Unpolluted” to “Class III–Remarkably Polluted”.     

The effect of Na vapor on the Na content of chondrules

Abstract— Chondrules contain higher concentrations of volatiles (Na) than expected for melt droplets in the solar nebula. Recent studies have proposed that chondrules may have formed under non-canonical nebular conditions such as in particle/gas-rich clumps. Such chondrule formation areas may have contained significant Na vapor. To test the hypothesis of whether a Na-rich vapor would minimize Na volatilization reaction rates in a chondrule analog and maintain the Na value of the melt, experiments were designed where a Na-rich vapor could be maintained around the sample. A starting material with a melting point lower that typical chondrules was required to keep the logistics of working with Na volatilization from NaCl within the realm of feasiblity. The Knippa basalt, a MgO-rich alkali olivine basalt with a melting temperature of 1325°± 5 °C and a Na₂O content of 3.05 wt%, was used as the chondrule analog. Experiments were conducted in a 1 atm, gas-mixing furnace with the fO₂ controlled by a CO/CO₂ gas mixture and fixed at the I-W buffer curve. To determine the extent of Na loss from the sample, initial experiments were conducted at high temperatures (1300 °C–1350 °C) for duration of up to 72 h without a Na-rich vapor present. Almost all (up to 98%) Na was volatilized in runs of 72 h. Subsequent trials were conducted at 1330 °C for 16 h in the presence of a Na-rich vapor, supplied by a NaCl-filled crucible placed in the bottom of the furnace. Succeeding Knudsen cell weight-loss mass-spectrometry analysis of NaCl determined the P_Na for these experimental conditions to be in the 10^?6 atm range. This value is considered high for nebula conditions but is still plausible for non-canonical environments. In these trials the Na₂O content of the glass was maintained or in some cases increased; Na₂O values ranged from 2.62% wt to 4.37% wt. The Na content of chondrules may be controlled by the Na vapor pressure in the chondrule formation region. Most heating events capable of producing chondrules are sufficient to volatilize Na. Sodium volatilization reaction rates will be reduced to varying degrees from melt droplets, depending on the magnitude of the P_Na generated. A combination of Na vapor during, and Na diffusion back into chondrules after, formation could maintain and/or enrich Na concentrations in chondrules.     

Bayesian geological and geophysical data fusion for the construction and uncertainty quantification of 3D geological models

Traditional approaches to develop 3D geological models employ a mix of quantitative and qualitative scientific techniques,which do not fully provide quantification of uncertainty in the constructed models and fail to optimally weight geological field observations against constraints from geophysical data.Here,using the Bayesian Obsidian software package,we develop a methodology to fuse lithostratigraphic field observations with aeromagnetic and gravity data to build a 3D model in a small(13.5 km×13.5 km)region of the Gascoyne Province,Western Australia.Our approach is validated by comparing 3D model results to independently-constrained geological maps and cross-sections produced by the Geological Survey of Western Australia.By fusing geological field data with aeromagnetic and gravity surveys,we show that 89%of the modelled region has>95%certainty for a particular geological unit for the given model and data.The boundaries between geological units are characterized by narrow regions with<95%certainty,which are typically 400-1000 m wide at the Earth's surface and 500-2000 m wide at depth.Beyond~4 km depth,the model requires geophysical survey data with longer wavelengths(e.g.,active seismic)to constrain the deeper subsurface.Although Obsidian was originally built for sedimentary basin problems,there is reasonable applicability to deformed terranes such as the Gascoyne Province.Ultimately,modification of the Bayesian engine to incorporate structural data will aid in developing more robust 3D models.Nevertheless,our results show that surface geological observations fused with geophysical survey data can yield reasonable 3D geological models with narrow uncertainty regions at the surface and shallow subsurface,which will be especially valuable for mineral exploration and the development of 3D geological models under cover.     

The structure of the lower crust at the Argentine continental margin, South Atlantic at 44°S

It is well established that the Argentine passive margin is of the rifted volcanic margin type. This classification is based primarily on the presence of a buried volcanic wedge beneath the continental slope, manifested by seismic data as a seaward dipping reflector sequence (SDRS). Here, we investigate the deep structure of the Argentine volcanic margin at 44°S over 200 km from the shelf to the deep oceanic Argentine Basin. We use wide-angle reflection/refraction seismic data to perform a joint travel time inversion for refracted and reflected travel times. The resulting P-wave velocity-depth model confirms the typical volcanic margin structure. An underplated body is resolved as distinctive high seismic velocity (v_p up to 7.5 km/s) feature in the lower crust in the prolongation of a seaward dipping reflector sequence. A remarkable result is that a second, isolated body of high seismic velocity (v_p up to 7.3 km/s) exists landward of the first high-velocity feature. The centres of both bodies are 60 km apart. The high-velocity lower-crustal bodies likely were emplaced during transient magmatic–volcanic events accompanying the late rifting and initial drifting stages. The lateral variability of the lower crust may be an expression of a multiple rifting process in the sense that the South Atlantic rift evolved by instantaneous breakup of longer continental margin segments. These segments are confined by transfer zones that acted as rift propagation barriers. A lower-crustal reflector was detected at 3 to 5 km above the modern Moho and probably represents the lower boundary of stretched continental crust. With this finding we suggest that the continent–ocean boundary is situated 70 km more seaward than in previous interpretations.     

Sea water intrusion by sea-level rise: scenarios for the 21st century

This study presents a method to assess the contributions of 21st-century sea-level rise and groundwater extraction to sea water intrusion in coastal aquifers. Sea water intrusion is represented by the landward advance of the 10,000 mg/L iso-salinity line, a concentration of dissolved salts that renders groundwater unsuitable for human use. A mathematical formulation of the resolution of sea water intrusion among its causes was quantified via numerical simulation under scenarios of change in groundwater extraction and sea-level rise in the 21st century. The developed method is illustrated with simulations of sea water intrusion in the Seaside Area sub-basin near the City of Monterey, California (USA), where predictions of mean sea-level rise through the early 21st century range from 0.10 to 0.90 m due to increasing global mean surface temperature. The modeling simulation was carried out with a state-of-the-art numerical model that accounts for the effects of salinity on groundwater density and can approximate hydrostratigraphic geometry closely. Simulations of sea water intrusion corresponding to various combinations of groundwater extraction and sea-level rise established that groundwater extraction is the predominant driver of sea water intrusion in the study aquifer. The method presented in this work is applicable to coastal aquifers under a variety of other scenarios of change not considered in this work. For example, one could resolve what changes in groundwater extraction and/or sea level would cause specified levels of groundwater salinization at strategic locations and times.     

Bedload transport measurements with impact plate geophones: comparison of sensor calibration in different gravel‐bed streams

Indirect bedload transport measurements have been made with the Swiss plate geophone system in five gravel‐bed mountain streams. These geophone sensors record the motion of bedload particles transported over a steel plate mounted flush with the channel bed. To calibrate the geophone system, direct bedload transport measurements were undertaken simultaneously. At the Erlenbach in Switzerland, a moving‐basket sampler was used. At the Fischbach and Ruetz streams in Austria, a Helley–Smith type bedload sampler provided the calibration measurements. A Bunte‐type bedload trap was used at the Rofenache stream in Austria. At the Nahal Eshtemoa in Israel, Reid‐type slot bedload samplers were used. To characterize the response of the geophone signal to bedload particles impacting on the plate, geophone summary values were calculated from the raw signal and stored at one second intervals. The number of impulses, i.e. the number of peaks above a pre‐defined threshold value of the geophone output signal, correlated well with field measured gravel transport loads and was found to be a robust parameter. The relations of impulses to gravel transport loads were generally near‐linear, but the steepness of the calibration relations differed from site to site. By comparing the calibration measurements from the different field sites and utilizing insights gained during preliminary flume experiments, it has been possible to identify the main factors that are responsible for site specific differences in the calibration coefficient. The analysis of these calibration measurements indicates that the geophone signal also contains some information about the grain size distribution of bedload. Copyright © 2013 John Wiley & Sons, Ltd.