The Effect of Key Parameters on the Strength of a Dispersive Soil Stabilized with Sustainable Binders

Geotechnical and Geological Engineering - Dispersive soils are susceptible to phenomena of internal and external erosion when in contact with relatively pure water due to its particle’s...     

Long‐term temporal and spatial patterns in bioeroding sponge distribution at the Abrolhos Bank,Brazil, Southwestern Atlantic

Bioeroding sponges belong to the most dominant bioeroders, significantly contributing to the erosion of coral reefs. Some species are tolerant or even benefit from environmental conditions such as ocean warming, acidification, and eutrophication. In consequence, increases in sponge bioerosion have been observed on some coral reefs over the last decades. The Abrolhos Bank is the largest coral reef system in the South Atlantic. It has been affected by sedimentation, eutrophication, overfishing, and climate change, mainly affecting coastal reefs, and at lesser intensity outer ones as well. This study aimed to describe spatial and temporal patterns in bioeroding sponge distribution in carbonate substrates in the Abrolhos Bank. Photo‐quadrats were used to compare bioeroding sponge abundance between two shallow reefs: a coastal, Pedra de Leste (PL), and an outer reef, Parcel dos Abrolhos (PAB). Each individual was delimitated over the substrate by determining the sponge surface through a line connecting the outermost papillae. The study was conducted over 6 years in 2008–2009 and 2013–2016. Four species of bioeroding sponges were identified: Cliona carteri Ridley, 1881, C. delitrix Pang, 1973, C. cf. schmidtii Ridley, 1881, and Siphonodictyon coralliphagum Rützler, 1971. The distribution and abundance of species varied between the inner and outer reefs and across the years, and displayed certain selectivity for the calcareous substrates recorded. Crustose coralline algae (CCA) were the main substrate excavated by the most abundant bioeroding species, C. carteri, and represented 70% of the substrate types occupied by this sponge (CCA, coral overgrown by CCA and plain coral). The highest abundance of bioeroding sponges observed in photo‐quadrats was 21.3 individuals/m² at the outer reefs (PAB) in 2014. The abundances or areal extents of bioeroding sponges were up to 10 times greater on the outer reefs than on the coastal ones, where sedimentation is higher and more strongly influenced by siliciclastic material. Moreover, a higher herbivorous fish biomass has been reported on outer reefs which could also influence the higher abundance of bioeroding sponges in outer reefs. During the study period of 6 years, an increase in bioeroding sponge abundance was observed at the outer reefs (PAB), with the sea surface temperature increase. As CCA have an important role in reefal cementation and carbonate production in the Abrolhos reefs, a bioerosion impact might be expected, in particular, on the outer reefs.     

Mesoscale and microscale shock effects in the LL6 S4 chondrites Saint‐Séverin and Elbert: A tale of two breccias

Saint‐Séverin and Elbert, two LL6 chondrite breccias, were systematically studied to evaluate multiple deformation effects on spatial scales ranging from thin section (mesoscale) to micron‐submicron (microscale) using optical microscopy, electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). The different techniques provide consistent results but have complementary strengths, together providing a powerful approach to unravel even complex impact histories. Both meteorites have an S4 conventional shock stage, but interclast areas are more deformed, and clasts are more deformed in Elbert than in Saint‐Séverin. TEM and EBSD data provide compelling evidence that Saint‐Séverin experienced significant shock deformation while already hot, and cooled rapidly afterward, as a result of a major, possibly disruptive impact on the LL chondrite parent body ~4.4 Ga ago. In contrast, Elbert was shocked from a cold initial state but was heated significantly during shock, and cooled in a localized hot impact deposit on the LL asteroid. Both meteorites probably were shocked at least twice; data for Saint‐Séverin are best reconciled with a three‐impact model.     

Late Miocene evaporite geochemistry of Lorca and Fortuna basins (Eastern Betics,SE Spain): Evidence of restriction and continentalization

The Lorca and Fortuna basins are two intramontane Neogene basins located in the eastern Betic Cordillera (SE Spain). During the Late Tortonian—Early Messinian, marine and continental evaporites precipitated in these basins as a consequence of increased marine restriction and isolation. Here we show a stratigraphic correlation between the evaporite records of these basins based on geochemical indicators. We use SO₄ isotope compositions and Sr isotopic ratios in gypsum, and halite Br contents to characterize these units and to identify the marine or continental source of the waters feeding the evaporite basins. In addition, we review the available chronological information used to date these evaporites in Lorca (La Serrata Fm), including a thick saline deposit, that we correlate with the First Evaporitic Group in Fortuna (Los Baños Fm). This correlation is also supported by micropalaeontological data, giving a Late Tortonian age for this sequence. The Second Evaporitic Group, (Chicamo Fm), and the Third Evaporitic Group (Rambla Salada Fm) developed only in Fortuna during the Messinian. According to the palaeogeographical scheme presented here, the evaporites of the Lorca and Fortuna basins were formed during the Late Tortonian—Early Messinian, close to the Betic Seaway closure. Sulphate isotope compositions and Sr isotopic ratios of the Ribera Gypsum Mb, at the base of the Rambla Salada Fm (Fortuna basin), match those of the Late Messinian selenite gypsum beds in San Miguel de Salinas, in the near Bajo Segura basin (40 km to the East), and other Messinian Salinity Crisis gypsum deposits in the Mediterranean. According to these geochemical indicators and the uncertainty of the chronology of this unit, the assignment of the Rambla Salada Fm to the MSC cannot be ruled out.     

Groundwater contamination with arsenic and other trace elements in an area of the pampa,province of Córdoba,Argentina

A geochemical study of groundwater of the pampa in the province of Córdoba, Argentina, was performed; the area covered approximately 10,000 km².Physical-chemical parameters, dissolved solids, and seven trace elements were determined in 60 selected water samples. Systematic and accurate measurements of arsenic, flourine, and vanadium were performed for the first time. Three trace element contaminants not reported earlier were found: an important one, selenium, and two others of less known effects, uranium and molybdenum.Eighty-four percent of the water analyzed showed arsenic contents over 0.05 mg/L, maximum contaminant level established by the U.S. Environmental Protection Agency (1982). The frequency distribution of trace elements was analyzed, and its fit to the lognormal distribution was proved by means of the Pearson and Kolmogorov-Smirnov test; the geographic distribution of the seven trace elements was mapped and its correlation with the anion-cation composition of the water was studied.The maximum arsenic, fluorine, vanadium, and uranium contents were found in the western part of the area under study, in waters containing dominant alkali metals in the cation composition. Maximum selenium and antimony contents were found in the eastern part of the area, while molybdenum distribution does not show any relationship with the other two groups. In addition, the geographic distribution of the trace elements seems to be related to the subsurface structure, which has been inferred using interactive digital analysis of Landsat imagery. The movements of the subsoil have disturbed surface and subsurface drainage influencing the water salinity and trace element contents.In order to investigate the origin of the contamination, 54 loess samples were collected in wells at depths ranging from the surface down to the water table. This loess, which has a high proportion of volcanic components, mainly rhyolitic glass, exhibits a chemical composition corresponding to that of a dacite.The loess and the volcanic glass show anomalous contents of all contaminant trace elements, mainly arsenic and selenium. For this reason loess is considered the most important contamination source in the groundwater under study.     

Space,Place, Population and Census Analysis in Australia

The Australian Census of Population and Housing is a census of people not places. However, where people live and work can be of major relevance in our search for explaining and understanding their behaviour. This paper argues that the place dimension in the Australian census has not been exploited very effectively in this respect. Three dimensions of the issue are addressed. Firstly, the spatial units commonly used for analysis of census data often are not appropriate to the problem being investigated. The spatial units in the Australian Standard Geographical Classification (ASGC) used for census data rarely represent meaningful social, economic and environmental regions. Secondly, the use of a simple urban/rural dichotomy is criticised as being a very blunt instrument to differentiate settlement types. Thirdly, the relationship between people and place in the census is discussed. While for the most part the census relates people to a single location—their place of usual residence—this is only one of the places with which people regularly interact. It is suggested that there is a need to adopt practices in the census which allow a range of population geographies to be defined. In conclusion it is argued that innovation in the Australian census, especially with the introduction of meshblocks and contemporary methodology and technology in Geographical Information Systems, makes it possible to analyse spatially referenced data in ways that can address these three issues.     

Study of the erosion rates in the upper Maracujá Basin (Quadrilátero Ferrífero/MG,Brazil) by the in situ produced cosmogenic 10Be method

The present work quantifies the erosive processes in the two main substrates (schists–phyllites and granites–gneisses) of the upper Maracujá Basin in the Quadrilátero Ferrífero/MG, Brazil, a region of semi‐humid tropical climate. Two measuring methods of concentration were used: (i) in situ produced ¹⁰Be in quartz veins (surface erosion rates) and (ii) ¹⁰Be in fluvial sediments (basin erosion rates). The results confirm that (i) erosion tends to be more aggressive close to the headwaters than in the lower parts of the basin and (ii) the region is now affected by dissection. Copyright © 2006 John Wiley & Sons, Ltd.     

Seismic,petrologic, and geodetic analyses of the 1999 dome-forming eruption of Guagua Pichincha volcano,Ecuador

Guagua Pichincha, located 14 km west of Quito, Ecuador, is a stratovolcano bisected by a horseshoe-shaped caldera. In 1999, after some months of phreatic activity, Guagua Pichincha entered into an eruptive period characterized by the extrusion of several dacitic domes, vulcanian eruptions, and pyroclastic flows. We estimated the three-dimensional (3-D) P-wave velocity structure beneath Guagua Pichincha using a tomographic inversion method based on finite-difference calculations of first-arrival times. Hypocenters of volcano-tectonic (VT) earthquakes and long-period (LP) events were relocated using the 3-D P-wave velocity model. A low-velocity anomaly exists beneath the caldera and may represent an active volcanic conduit. Petrologic analysis of eruptive products indicates a magma storage region beneath the caldera, having a vertical extent of 7–8 km with the upper boundary at about sea level. This zone coincides with the source region of deeper VT earthquakes, indicating that a primary magma body exists in this region. LP swarms occurred in a cyclic pattern synchronous with ground deformation during magma extrusions. The correlation between seismicity and ground deformation suggests that both respond to pressure changes caused by the cyclic eruptive behavior of lava domes.     

A system for large volume aerosol sampling in the stratosphere using electrostatic precipitation

Summary An instrumental system for securing aerosol samples in the stratosphere by electrostatic precipitation has been developed. The system is designed to be balloon borne to altitudes between 30 km and 45 km and to collect with high efficiency the aerosol content of the stratosphere at these altitudes. Volumetric sampling rates of one meter³ sec^–1 ambient air are obtained with the sampling configuration with collection efficiency in excess of 95 percent for particles between .01 microns (mmd) and 2 microns (mmd).Specially developed associated instrumentation for altitude and air flow measurement points to an important versatility in the application of gas discharges for low-pressure (or high altitude) altimetry and anemometry over a very wide range of air densities and tempertures.The theory, operation, and performance of the aerosol sampling system and associated subsytems are described. Certain new observations of low-density corona physics phenomena are reported and potential applications to other areas of research and technology are indicated.

---

Zusammenfassung Es wurde ein Instrument entwickelt, mit dem man Aerosolproben aus der Stratosphäre durch elektrostatischen Niederschlag erhalten kann. Das System wird von einem Ballon in Höhen zwischen 30 und 45 km getragen und sammelt mit hoher Wirksamkeit Proben des Aerosolgehalts in diesen Höhen. Mit dem Instrument wird eine Sammelgeschwindigkeit von 1 m³/sek erreicht bei einer Sammelwirksamkeit von mehr als 95% für Partikel von Größen zwischen 0,01 und 2 Mikron.Besonders entwickelte angeschlossene Instrumente zur Messung der Höhe und der Luftströmungen zeigen die wesentliche Vielseitigkeit der Anwendung von Gasentladungen für die Höhenmessung und Windmessung bei niedrigem Druck (oder in großen Höhen) in einem großen Bereich der Luftdichte und der Temperatur.Es werden die Theorie, die Arbeitsweise und die Ausführung des Aerosolprobeninstrumentes und der angeschlossenen Hilfssysteme beschrieben. Es wird über einige neue Beobachtungen aus dem Bereich der Phänomene der Gasentladungen bei niedriger Dichte berichtet und neue mögliche Anwendungen in anderen Zweigen der Forschung und Technologie werden angegeben.

---

Résumé On a construit un instrument au moyen duquel on peut obtenir des échantillons d'aérosole stratosphérique par précipitation électrostatique. Le système est emporté par un ballon à des altitudes de 30 à 45 km et rassemble avec efficacité des echantillons du contenu de l'aérosole à ces altitudes. Avec cet appareil, on obtient une vitesse de prise de 1 m³/sec avec une efficacité de plus de 95% pour les particules comprises entre 0,01 et 2 microns.Des appareils spéciaux annexes permettent de mesurer la hauteur et les courants d'air. Ils démontrent les possibilités multiples de l'utilisation de la décharge dans un gaz pour la mesure de l'altitude et des vents par pression très faible (ou à très haute altitude) dans un domaine étendu tant de la densité de l'air que de la température.On décrit dans ce mémoire la théorie, le mode de travail et l'exécution de cet instrument de prise d'échantillons d'aérosoles ainsi que des systèmes auxiliaires annexes. On rapporte sur quelques nouvelles observations faites dans le domaine des phénomènes connexes à la décharge dans un gaz par faible densité. On indique en outre de nouvelles possibilités d'utilisation du système dans d'autres branches de la recherche ou de la technologie.

---

---

With 16 Figures

---

This work has been supported by the Division of Biology and Medicine, U. S. Atomic Energy Commission, under contract at (30-1)-2363 with Del Electronics.